journal article·2001-04

Creep behavior of TiBw/Ti In-situ composite fabricated by reactive hot pressing

Z. Y. Ma, S. C. Tjong, S. X. Li

Publisher page

Abstract

The creep behavior of 15 vol pct TiBw/Ti composite and unreinforced Ti was investigated at 873 to 923 K. The 15 vol pct TiBw/Ti composite exhibited a stress exponent of 4.6 to 4.7 and an activation energy of 300 kJ/mol, which were close to those for the lattice diffusion of α-Ti. Finally, the creep resistance of the composite was about one order of magnitude higher than that of unreinforced Ti.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. A.G. Metcalfe: J. Compos. Mater., 1967, vol. 1, pp. 356–61.10.1177/002199836700100404 ↗
2. S. Ochiai and Y. Murakami: Z. Metallkd., 1981, vol. 72, pp. 827–31.
3. S. Ochiai, K. Osamure, and Y. Murakami: Z. Metallkd., 1983, vol. 74, pp. 68–73.
4. P. Soumeldis, J.M. Quenisset, R. Naslain, and N.S. Stoloff: J. Mater. Sci., 1986, vol. 21, pp. 895–903.10.1007/BF01117370 ↗
5. M.H. Loretto and D.G. Konitzer: Metall. Trans. A, 1990, vol. 21A, pp. 1579–87.10.1007/BF02672573 ↗
6. S.K. Choi, M. Chandrasekharan, and M.J. Brabers: J. Mater. Sci., 1990, vol. 25, pp. 1957–64.10.1007/BF01045749 ↗
7. J.C. Rawers, W.R. Wrzesinski, E.K. Rous, and R.R. Brown: Mater. Sci. Technol., 1990, vol. 6, pp. 187–91.10.1179/mst.1990.6.2.187 ↗
8. S. Abkowits and P. Weihrauch: Adv. Mater. Processing, 1989, vol. 136, pp. 31–35.
9. J. Kennedy and G. Geschwind: in Titanium Science and Technology, R.I. Jaffe and H.M. Burte, eds., Plenum, New York, NY, 1973, p. 2299.
10. D.G. Konitzer and M.H. Loretto: Acta Metall., 1989, vol. 37, pp. 397–406.10.1016/0001-6160(89)90224-1 ↗
11. A.R.C. Westwood: Metall. Trans. A, 1988, vol. 19A, pp. 749–58.10.1007/BF02628353 ↗
12. S. Ranganath, M. Vijayakumar, and J. Subrahmanyam: Mater. Sci. Eng., 1992, vol. A149, pp. 253–57.10.1016/0921-5093(92)90386-F ↗
13. Y.X. Lu, D.X. Li, D.H. Ping, J. Bi, and Z.Y. Ma: J. Mater. Sci. Technol., 1997, vol. 13, pp. 41–44.10.1179/mst.1997.13.1.41 ↗
14. S. Ranganath, T. Roy, and R.S. Mishra: Mater. Sci. Technol., 1996, vol. 12, pp. 219–26.10.1179/026708396790165740 ↗
15. H.T. Tsang, C.G. Chao, and C.Y. Ma: Scripta Mater., 1996, vol. 35, pp. 1007–12.10.1016/1359-6462(96)00258-8 ↗
16. S. Ranganath: J. Mater. Sci., 1997, vol. 32, pp. 1–16.
17. W.O. Soboyejo, R.J. Lederich, and S.M.L. Sastry: Acta Metall. Mater., 1994, vol. 42, pp. 2579–91.10.1016/0956-7151(94)90199-6 ↗
18. X.N. Zhang, W.J. Lu, D. Zhang, and R.J. Wu: Scripta Mater., 1999, vol. 41, pp. 39–42.10.1016/S1359-6462(99)00087-1 ↗
19. D.X. Li, D.H. Ping, Y.X. Lu, and H.Q. Ye: Mater. Lett., 1993, vol. 16, pp. 322–26.10.1016/0167-577X(93)90201-8 ↗
20. S.J. Zhu, Y.X. Lu, Z.G. Wang, and J. Bi: Proc. 9th Int. Conf. on Composite Materials (ICCM/9), Antonio Miraveta, ed., University of Zaragona and Woodhead Publishing Limited, Cambridge, U.K., 1993, vol. 1, p. 594.
21. S. Ranganath and R.S. Mishra: Acta Mater., 1996, vol. 44, pp. 927–35.10.1016/1359-6454(95)00242-1 ↗
22. H.T. Tsang, C.G. Chao, and C.Y. Ma: Scripta Mater., 1997, vol. 37, pp. 1359–65.10.1016/S1359-6462(97)00251-0 ↗
23. Z.Y. Ma, S.C. Tjong, and L. Geng: Scripta Mater., 2000, vol. 42, pp. 359–65.10.1016/S1359-6462(99)00343-7 ↗
24. G. Malakondaiah and P.R. Rao: Acta Metall., 1981, vol. 29, pp. 1263–75.10.1016/0001-6160(81)90017-1 ↗
25. A.B. Pandey, R.S. Mishra, and Y.R. Mahajan: Acta Metall. Mater., 1992, vol. 40, pp. 2045–52.10.1016/0956-7151(92)90190-P ↗
26. S.C. Tjong and Z.Y. Ma: Compos. Sci. Technol., 1999, vol. 59, pp. 1117–25.10.1016/S0266-3538(98)00151-1 ↗