journal article·2002-02

Dislocation microstructure and internal-stress measurements by convergent-beam electron diffraction on creep-deformed Cu and Al

M. E. Kassner, M. T. Pérez-Prado, M. Long, K. S. Vecchio

Publisher page

Abstract

Creep experiments were conducted on aluminum single crystals and copper polycrystals deformed within the five-power-law regime. The dislocation structure of copper, which has not been extensively characterized in the past, consists of less-well-defined subgrain walls of relatively low misorientation, typically between 0.1 and 0.3 deg, with a Frank network of dislocations within the subgrains. The aluminum, as expected, consisted of well-defined subgrain boundaries with a typical misorientation between 1.0 and 2.0 deg. The subgrains were probed from one boundary to another in copper and aluminum using convergent-beam electron diffraction (CBED). This allowed a determination of any changes in the lattice parameter, which would indicate the presence of any internal stresses. Earlier investigations by others suggested that internal stresses may be high in the vicinity of the “hard” subgrain boundaries in both loaded and unloaded specimens, based on a variety of techniques including X-ray diffraction (XRD), stress-dip tests, as well as some preliminary CBED. It was determined in this work that the lattice parameter was unchanged at the equilibrium or stress-free value within the interior of the subgrains and along (within a one-beam diameter) the subgrain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. W.D. Nix and B. Ilschner: Strength of Metals and Alloys, P. Haasen, V. Gerold, and G. Kostorz, Pergamon, Oxford, United Kingdom, 1980, pp. 1503–30.
2. C.R. Barrett and O.D. Sherby: Trans. AIME, 1964, vol. 230, pp. 1322–27.
3. C.R. Barrett, Lytton, and O.D. Sherby: Trans. AIME, 1967, vol. 239, pp. 170–84.
4. D.J. Lloyd and J.D. Embury: Met. Sci., 1970, vol. 4, pp. 6–8.10.1179/030634570790444149 ↗
5. Pahutova, J. Cadek, and P. Rys: Phil. Mag., 1971, vol. 23, pp. 509–17.10.1080/14786437108216401 ↗
6. S.V. Raj and T.G. Langdon: Acta Metall., 1989, vol. 37, pp. 843–52.10.1016/0001-6160(89)90011-4 ↗
7. J.D. Parker and B. Wilshire: Mater. Sci. Eng., 1980, vol. 43, pp. 271–80.10.1016/0025-5416(80)90113-5 ↗
8. J.D. Parker and B. Wilshire: Met. Sci., 1978, vol. 12, pp. 453–58.10.1016/0036-9748(78)90256-9 ↗
9. M.E. Kassner and M.T. Perez-Prado: Progr. Mater. Sci., 2000, vol. 45, pp. 1–102.10.1016/S0079-6425(99)00006-7 ↗
10. B. Wilshire: Nashville, TN, private communication, 2000.
11. M.R. Staker and D.L. Holt: Acta Metall., 1972, vol. 20, pp. 509–89.10.1016/0001-6160(72)90012-0 ↗
12. S.V. Raj and R.G. Langdon: Acta Metall., 1991, vol. 39, pp. 1823–32.10.1016/0956-7151(91)90151-P ↗
13. S. Straub, W. Blum, H.J. Maier, T. Ungar, A. Borberly, and H. Renner: Acta Mater., 1996, vol. 44, pp. 4337–50.10.1016/1359-6454(96)00104-8 ↗
14. A.W. Sleeswyk, M.R. James, D.H. Plantinga, and W.S.T. Maathuis: Acta Metall., 1978, vol. 126, pp. 1265–71.10.1016/0001-6160(78)90011-1 ↗
15. E. Orowan: Internal Stress and Fatigue in Metals, General Motors Symp., Elsevier, Amsterdam, 1959, p. 59.
16. T. Hasegawa, Y. Ikeuchi, and S. Karashima: Met. Sci., 1972, vol. 6, pp. 78–82.10.1179/030634572790445858 ↗
17. H. Mughrabi: Acta Metall., 1983, vol. 31, pp. 1367–79.10.1016/0001-6160(83)90007-X ↗
18. H. Mughrabi: Mater. Sci. Eng. A, 1987, vol. 85, pp. 15–31.10.1016/0025-5416(87)90463-0 ↗
19. B. Derby and M.F. Ashby: Acta Metall., 1987, vol. 35, pp. 1349–53.10.1016/0001-6160(87)90017-4 ↗
20. W. Blum, A. Cegielska, A. Rosen, and J.L. Martin: Acta Metall., 1989, vol. 37, pp. 2439–53.10.1016/0001-6160(89)90041-2 ↗
21. J.C. Gibeling and W.D. Nix: Acta Metall., 1980, vol. 29, pp. 1769–84.10.1016/0001-6160(81)90010-9 ↗
22. M.A. Morris and J.L. Martin: Acta Metall., 1984, vol. 32, pp. 1609–23.10.1016/0001-6160(84)90220-7 ↗
23. M.A. Morris and J.L. Martin: Acta Metall., 1984, vol. 32, pp. 549–61.10.1016/0001-6160(84)90066-X ↗
24. S. Karashima, T. Iikubo, T. Watanabe, and H. Oikawa: Trans. Jpn. Inst. Met., 1971, vol. 12, pp. 369–74.10.2320/matertrans1960.12.369 ↗
25. A.S. Argon and S. Takeuchi: Acta Metall., 1981, vol. 29, pp. 1877–84.10.1016/0001-6160(81)90113-9 ↗
26. Lepinoux and L.P. Kubin: Phil. Mag. A, 1985, vol. 57, pp. 675–96.10.1080/01418618508245281 ↗
27. M.E. Kassner, M.-T. Pérez-Prado, K.S. Vecchio, and M.A. Wall: Acta Mater., 2000, vol. 48, pp. 4247–54.10.1016/S1359-6454(00)00284-6 ↗
28. C.N. Ahlquist and W.D. Nix: Acta Metall., 1971, vol. 19, pp. 373–85.10.1016/0001-6160(71)90105-2 ↗
29. W. Blum, J. Hausselt, and G. König: Acta Metall., 1976, vol. 24, pp. 293–97.10.1016/0001-6160(76)90003-1 ↗
30. Borbély, G. Hoffmann, E. Aernoudt, and T. Ungar: Acta Mater., 1997, vol. 45, pp. 89–98.10.1016/S1359-6454(96)00155-3 ↗
31. Borbély, W. Blum, and T. Ungar: Mater. Sci. Eng., 2000, vol. 276, pp. 186–94.10.1016/S0921-5093(99)00271-3 ↗
32. I. Gaal: Proc. 5th Int. Riso Symp., N. Hessel Andersen, M. Eldrup, N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, O.B. Pedersen, and B.N. Singh, eds., Riso National Lab., Roskilde, Denmark, 1984, pp. 249–54.
33. M.E. Kassner, M.T. Pérez-Prado, and K.S. Vecchio: Mater. Sci. Eng., in press.
34. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng., 1997, vol. A238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
35. P.B. Hirsch, A. Howie, R.B. Nicholson, and D.W. Pashley: Electron Microscopy of Thin Crystals, Butterworth and Co., London, 1965, p. 422.
36. J. Sutliff: Lehigh University, Bethlehem, PA, 1985.
37. M.E. Kassner and M.E. McMahon: Metall. Trans. A, 1987, vol. 18A, pp. 835–46.10.1007/BF02646925 ↗
38. O.D. Sherby and P.M. Burke: Progr. Mater. Sci., 1967, vol. 13, pp. 325–90.