Directional and single-crystal solidification of Ni-base superalloys: Part II. Coincidence site lattice character of grain boundaries
Source abstract
Abstract
The development of grain boundary misorientations with an evolving axial texture during directional solidification has been examined using the electron backscattered diffraction (EBSD) technique on the Ni-base superalloys, CMSX4 and CM186LC. A preferred grain boundary misorientation distribution (GBMD) for a sharp 〈001〉 axial texture in CM186LC was associated with a clustering of misorientation axes (MAx) in the proximity of 〈001〉. This is accompanied by an enhanced distribution of coincidence site lattice (CSL) boundaries. The increased distribution of low angle boundaries, Σ1 and Σ5, can be attributed to the existence of a preferred MAx and accommodation by secondary intrinsic grain boundary dislocations. The more diffuse 〈001〉 axial texture in CMSX4 is associated with a significant proportion of MAx deviating from 〈001〉 and a dramatic reduction in the proportion of CSL boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Solidification and crystal growth phenomena · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. H. Gleiter: Phys. Status Solidi (B), 1971, vol. 45, pp. 9–38.10.1002/pssb.2220450102 ↗
2. T. Watanabe: Mater. Forum, 1984, vol. 11, pp. 284–303.
3. G. Herrmann, H. Gleiter, and G. Baro: Acta Metall., 1976, vol. 24, pp. 353–59.10.1016/0001-6160(76)90010-9 ↗
4. V. Randle: The Role of the Coincident Site Lattice in Grain Boundary Engineering, The Institute of Materials, London, 1996, p. 45
5. A. Garbacz and M.W. Grabski: Acta Metall. Mater., 1993, vol. 41, pp. 475–83.10.1016/0956-7151(93)90076-5 ↗
6. A. Garbacz and M.W. Grabski: Scripta Metall., 1989, vol. 23, pp. 1369–73.10.1016/0036-9748(89)90061-6 ↗
7. Y. Pan and B.L. Adams: Scripta Metall. Mater., 1994, vol. 30, pp. 1055–60.10.1016/0956-716X(94)90554-1 ↗
8. T. Watanabe, H. Fuji, H. Oikawa, and K.I. Arai: Acta Metall., 1989, vol. 37, pp. 941–52.10.1016/0001-6160(89)90021-7 ↗
9. T. Watanabe, K.I. Arai, K. Yoshimi, and H. Oikawa: Phil. Mag. Lett., 1989, vol. 59, pp. 47–52.10.1080/09500838908214776 ↗
10. T. Watanabe, T. Hirano, T. Ochiai, and H. Oikawa: Mater. Sci. Forum, 1994, vols. 157–162, pp. 1103–08.10.4028/www.scientific.net/MSF.157-162.1103 ↗
11. E.M. Lehockey and G. Palumbo: Mater. Sci. Eng., 1997, vol. A237, pp. 168–72.10.1016/S0921-5093(97)00126-3 ↗
12. V. Randle: Microtexture Determination and Its Applications, The Institute of Materials, London, 1992, p. 87.
13. U. Bruckner, A. Epishin, and T. Link: Acta Mater., 1997, vol. 45, pp. 5223–31.10.1016/S1359-6454(97)00163-8 ↗
14. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
15. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229–40.10.1093/biomet/45.1-2.229 ↗
16. D.H. Warrington and M. Boon: Acta Metall., 1975, vol. 23, pp. 599–607.10.1016/0001-6160(75)90100-5 ↗
17. A. Garbacz and M.W. Grabski: Acta Metall. Mater., 1993, vol. 41, pp. 469–73.10.1016/0956-7151(93)90075-4 ↗
18. S. Hanada, T. Ogura, S. Watanabe, O. Izumi, and T. Masumato: Acta Metall. Mater., 1986, vol. 34, pp. 13–21.10.1016/0001-6160(86)90226-9 ↗