Microstructural Evolution of Secondary Phases in the Cast Duplex Stainless Steels CD3MN and CD3MWCuN
Source abstract
Abstract
The isothermal formation behavior of secondary phases in two types of duplex stainless steels (DSS), CD3MN and CD3MWCuN, was characterized. Samples were heat treated from 1 minute to 30 days at temperatures from 700°C to 900°C. Small carbide (M23C6) and nitride (Cr2N) precipitates, together with the intermetallic phases sigma and chi, were observed using scanning electron microscopy (SEM) and confirmed by transmission electron microscopy (TEM) analyses. Based on SEM analysis, time-temperature-transformation (TTT) curves for the sigma and chi phases were determined by measuring their volume fractions from backscattered electron micrographs of heat-treated and quenched sample cross sections. Resulting TTT curves showed that the maximum formation temperature for chi is lower than that for sigma, while the time to reach 1 vol pct formation is much less for sigma than it is for chi. The thermodynamic driving forces associated with the sigma and chi formation were assessed using Thermo-Calc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Special Report No. 31, M. Blair, ed., Steel Founders’ Society of America, 2001, pp. 1–52
2. Lee K.M., Cho H.S., Choi D.C. (1999) J. Alloys Compounds, 285:156–6110.1016/S0925-8388(99)00014-6 ↗
3. Ramirez A.J., Lippold J.C., Brandi S.D. (2003) Metall. Trans. A 34A:1575–9710.1007/s11661-003-0304-9 ↗
4. Lee Y.H., Kim K.T., Lee Y.D., Kim K.Y. (1998) Mater. Sci. Technol. 14:757–6410.1179/mst.1998.14.8.757 ↗
5. Kim S.-B., Paik K.-W., Kim Y.-G. (1997) Mater. Sci. Eng. A 247:67–7410.1016/S0921-5093(98)00473-0 ↗
6. Duplex Stainless Steels: Microstructure, Properties and Applications, R.N. Gunn, ed., Abington Publishing, 1997
7. J.-O. Nillson, P. Kangas, T. Karlsson, and Q. Wilson: Metall. Trans. A, 2000, vol. 31A, pp. 35–45.10.1007/s11661-000-0050-1 ↗
8. Proc . Conf. Duplex Stainless Steels ‘83, R.A. Lula, ed., ASM, Metals Park, OH, 1983, vol. 1, pp. 693–756
9. H.D. Solomon and T.M. Devine: ASTM STP 672, ASTM, Philadelphia, PA, 1979, pp. 430–61
10. B. Josefsson, J.-O. Nilsson, and A. Wilson: in Duplex Stainless Steels ‘91, J. Charles and S. Bernhardsson, eds., Les Editions de Physique, Beaune, France, 1991, vol. 1, pp. 67–75
11. X.G. Wang, D. Dumortier, and Y. Riquier: in Duplex Stainless Steels’91, J. Charles and S. Bernhardsson, eds., Les Editions de Physique, Beaune, France, 1991, vol. 1, pp. 127–34
12. Johnson E., Kim Y.-J., Chumbley L.S., Gleeson B. (2004) Scripta Mater. 50:1351–5410.1016/j.scriptamat.2004.02.014 ↗
13. Kim Y.-J., Chumbley L.S., Gleeson B. (2004) Metall. Mater. Trans. A, 35A:3377–8610.1007/s11661-004-0174-9 ↗
14. Wilms M.E., Gadgil V.J., Krougman J.M., Ijsseling F.P. (1994) Corr. Sci. 36:871–7510.1016/0010-938X(94)90176-7 ↗
15. J. Charles: Proc. Conf. Duplex Stainless Steels ‘91, Les Editions de Physique, Beaune, France, 1991, vol. 1, pp. 3–48
16. Nilsson J.-O., Kangas P., Karlsson T., Wilson Q. (2000) Metall. Trans. A 31A:35–4510.1007/s11661-000-0050-1 ↗
17. Andersson J.-O., Helander T., Hoglund L., Shi P.-F., Sundman B. (2002) Calphad, 26:273–31210.1016/S0364-5916(02)00037-8 ↗