Synthesis and microstructure of bulk nanocrystalline copper
Source abstract
Abstract
The synthesis of bulk nanocrystalline copper (NC-Cu) by powder metallurgy is presented, from compaction of nanocrystalline powders to sintering and differential extrusion. At each step of the process, the microstructure is characterized using X-ray diffraction (XRD) analysis, field-emission gun scanning electron microscopy (FEG-SEM), and transmission electron microscopy (TEM). Particular attention is given to the concept of grain size in nanostructured materials and the comparison of results from the different characterization techniques. The fully dense material has a grain size of 100 nm with a microstructure best described in terms of the distribution of high-angle grain boundaries (GBs), twin boundaries, and low-angle GBs. Dislocations occur in half the grains and at most of the twin boundaries. The GBs are shown to be crystalline, and no evidence is found for amorphous interfacial regions. It is proposed that the grain size be defined only in terms of high-angle GBs, excluding low-angle GBs, for the discussion of mechanical properties. In this respect, the microstructure is compared with the NC-Cu material produced by other synthesis techniques. Powder metallurgy (P/M) processing is revealed as an alternative for the production of large-size submicrocrystalline and NC materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, and T.C. Lowe: J. Mater. Res., 2002, vol. 17, pp. 5–8.10.1557/JMR.2002.0002 ↗
2. Y. Champion, C. Langlois, S. Guérin-Mailly, P. Langlois, J.-L. Bonnentien, and M.J. Hÿtch: Science, 2003, vol. 300, pp. 310–11.10.1126/science.1081042 ↗
3. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–15.10.1038/nature01133 ↗
4. L. Lu, M.L. Sui, and K. Lu: Science, 2000, vol. 287, pp. 1463–66.10.1126/science.287.5457.1463 ↗
5. K.V. Ivanov, I.V. Ratochka, and Y.R. Kolobov: Nanostruct. Mater., 1999, vol. 12, pp. 947–50.10.1016/S0965-9773(99)00274-3 ↗
6. L. Lu, L.B. Wang, B.Z. Ding, and K. Lu: J. Mater. Res., 2000, vol. 15, pp. 270–73.10.1557/JMR.2000.0043 ↗
7. H. Jiang, Y.T. Zhu, D.P. Butt, I.V. Alexandrov, and T.C. Lowe: Mater. Sci. Eng. A, 2000, vol. 290, pp. 128–38.10.1016/S0921-5093(00)00919-9 ↗
8. S.X. McFadden, R.S. Mishra, R.Z. Valiev, A.P. Zhilyaev, and A.K. Mukherjee: Nature, 1999, vol. 398, pp. 684–86.10.1038/19486 ↗
9. G.W. Nieman, J.R. Weertman, and R.W. Siegal: J. Mater. Res., 1991, vol. 6, pp. 1012–027.10.1557/JMR.1991.1012 ↗
10. P. Apte, B.H. Suits, and R.W. Siegel: Nanostruct. Mater., 1997, vol. 9, pp. 501–04.10.1016/S0965-9773(97)00110-4 ↗
11. X.J. Wu, L.G. Du, H.F. Zhang, J.F. Liu, Y.S. Zhou, Z.S. Li, L.Y. Xiong, and Y.L. Bai: Nanostruct. Mater., 1999, vol. 12, pp. 221–24.10.1016/S0965-9773(99)00103-8 ↗
12. Y. Champion and J. Bigot: J. Nanostruct. Mater., 1998, vol. 10, pp. 1097–110.10.1016/S0965-9773(98)00149-4 ↗
13. Y. Champion, F. Bernard, N. Guigue-Millot, and P. Perriat: Mater. Sci. Eng., 2003, vol. 260, pp. 258–66.10.1016/S0921-5093(03)00446-5 ↗
14. T. Ungár, S. Ott, P.G. Sanders, A. Borbély, and J.R. Weertman: Acta Mater., 1998, vol. 46, pp. 3693–99.10.1016/S1359-6454(98)00001-9 ↗
15. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
16. B.E. Warren: in Progress in Metal Physics, Pergamon Publishing Corp., New York, NY, 1959, vol. 8, pp. 147–202.
17. T. Ungár: Mater. Sci. Eng. A, 2001, vols. 309–310, pp. 14–22.10.1016/S0921-5093(00)01685-3 ↗
18. Y. Champion and J. Bigot: Mater. Sci. Eng., 1996, vols. 217–218, pp. 58–63.10.1016/S0921-5093(96)10291-4 ↗
19. P.G. Sanders, A.B. Witney, J.R. Weertman, R.Z. Valiev, and R.W. Siegel: Mater. Sci. Eng., 1995, vol. 204, pp. 7–11.10.1016/0921-5093(95)09928-X ↗
20. O. Dominguez, Y. Champion, and J. Bigot: Proc. Annual Meeting of TMS, Austin, TX, 1996, D.L. Bourell, ed., TMS, Warrendale, PA, 1996.
21. G.W. Nieman, J.R. Weertman, and R.W. Siegel: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1991.
22. A.A. Nazarov, A.E. Romanov, and R.Z. Valiev: Scripta Metall. Mater., 1990, vol. 24, pp. 1984–94.10.1016/0956-716X(90)90053-J ↗
23. L. Priester: Mater. Sci. Eng. A, 2001, vol. 309–310, pp. 430–39.10.1016/S0921-5093(00)01696-8 ↗
24. S. Lartigue-Korinek and L. Priester: J. Am. Ceram. Soc., 1988, vol. 71, pp. 430–37.10.1111/j.1151-2916.1988.tb05890.x ↗
25. A.W. Thompson: Acta Metall., 1975, vol. 23, pp. 1337–42.10.1016/0001-6160(75)90142-X ↗
26. S. Mahajan and G.Y. Chin: Acta Metall., 1973, vol. 21, pp. 173–79.10.1016/0001-6160(73)90059-X ↗
27. J.P. Hirth and J. Lothe: Theory of Dislocations, Wiley, New York, NY, 1982.
28. O.V. Mishin, D. Juul Jensen, and N. Hansen: Mater. Sci. Eng. A, 2003, vol. 342, pp. 320–28.10.1016/S0921-5093(02)00311-8 ↗