journal article·2008-06

A Model for High-Temperature Pitting Corrosion in Nickel-Based Alloys Involving Internal Precipitation of Carbides, Oxides, and Graphite

J.Z. Albertsen, Ø. Grong, J.C. Walmsley, R.H. Mathiesen, W. Van Beek

Publisher page

Abstract

The present investigation is concerned with fundamental studies of the mechanisms of pitting corrosion in the Ni-based alloys 602 and 693, following long-term exposure to syngas at 540 °C and a 35-bar total pressure. The 4-years’ plant-exposed alloys were examined using synchrotron X-ray diffraction (XRD) in combination with scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It is concluded that the pitting corrosion attacks start when carbon diffuses into the bulk of the alloys following the breakdown of the protective Cr2O3-Al2O3 surface oxide layer. During the incubation period, this oxide layer provides an effective barrier against carbon intrusion by virtue of its ability to restore cracks and flaws through diffusion. The corrosion pits then grow by a process of internal carburization and oxidation, in which carbides, oxides, and graphite form separately within an approximately 30-μm-thick belt in front of the pits (referred to as the white zone). In particular, the oxidation of the internal Cr3C2 carbides occurring close to the white zone/pit interface is associated with large volume changes. This volume expansion results in the buildup of high mechanical stresses within the white zone and, eventually, to the complete disintegration of the original alloy matrices into a layered pit microstructure consisting of Ni + Fe and Cr2O3 + Al2O3 + graphite. The observed microstructural changes have been rationalized through detailed modeling of the physical reactions involved, leading to the development of new and comprehensive models for high-temperature pitting corrosion in Ni-based alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. R.T. Jones and K.L. Baumert: Corrosion/2001, Paper No. 1372, NACE International, Houston, TX, 2001
2. H.J. Grabke, R. Krajak, J.C. Nava Paz: Corros. Sci., 1993, vol. 35 (5–8), pp. 1141–5010.1016/0010-938X(93)90334-D ↗
3. R.C. Schueler: Hydrocarbon Process., 1972, vol. 51, pp. 73–75
4. G.Y. Lai: High-Temperature Corrosion of Engineering Alloys, 1st ed., ASM INTERNATIONAL, Materials Park, OH, 1990
5. J. Pattinson: J. Iron Inst., 1876, vol. 1, pp. 85–100
6. E.Q. Camp, C. Phillips, L. Gross: Corrosion, 1945, vol. 1 (3), pp. 149–6010.5006/0010-9312-1.3.149 ↗
7. H.K. Ihrig: Trans. Electrochem. Soc., 1947, vol. 91, pp. 641–5410.1149/1.3071796 ↗
8. F.A. Prange: Corrosion, 1959, vol. 15 (12), pp. 619t–621t10.5006/0010-9312-15.12.13 ↗
9. F. Eberle, R.D. Wylie: Corrosion, 1959, vol. 15 (12), pp. 622t–626t10.5006/0010-9312-15.12.16 ↗
10. W.B. Hoyt, R.H. Caughey: Corrosion, 1959, vol. 15 (12), pp. 627t–630t
11. R.F. Hochman, J.H. Burson: Am. Pet. Inst. Div. Refin. Proc., 1966, vol. 46, pp. 331–44
12. H.J. Grabke, R. Krajak, E.M. Müller-Lorenz: Werkstoffe Korros., 1993, vol. 44, pp. 89–9710.1002/maco.19930440306 ↗
13. E. Pippel, J. Woltersdorf, H.J. Grabke, S. Strauss: Steel Res., 1995, vol. 66 (5), pp. 217–2110.1002/srin.199501115 ↗
14. D.C. Agarwal, W.R. Herda, U. Brill: Adv. Mater. Processes, 1995, vol. 148 (4), pp. 42–45
15. M.L. Holland, H.J. De Bruyn: Int. J. Press. Ves. Pip., 1996, vol. 66 (1–3), pp. 125–3310.1016/0308-0161(95)00089-5 ↗
16. C.M. Chun, T.A. Ramanarayanan, J.D. Mumford: Mater. Corros., 1999, vol. 50, pp. 634–3910.1002/(SICI)1521-4176(199911)50:11<634::AID-MACO634>3.0.CO;2-F ↗
17. B. Schmid: Doctoral Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2000
18. B. Schmid, J.C. Walmsley, Ø. Grong, R. Ødegård: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 345–5410.1007/s11661-003-0335-2 ↗
19. B.A. Baker and G.D. Smith: Corrosion/2000, Paper No. 257, NACE International, Houston, TX, 2000
20. H.J. De Bruyn, E.H. Edwin, and S. Brendryen: Corrosion/2001, Paper No. 1383, NACE International, Houston, TX, 2000
21. Z. Zeng, K. Natesan, V.A. Maroni: Oxid. Met., 2002, vol. 58 (1–2), pp. 147–7010.1023/A:1016068625429 ↗
22. C.H. Toh: Doctoral Thesis, University of New South Wales, Sydney, 2002
23. C.H. Toh, P.R. Munroe, D.J. Young: Oxid. Met., 2002, vol. 58 (1–2), pp. 1–2110.1023/A:1016032722703 ↗
24. P. Szakálos, R. Pettersson, S. Hertzman: Corros. Sci., 2002, vol. 44 (10), pp. 2253–7010.1016/S0010-938X(02)00053-7 ↗
25. P. Szakálos: Mater. Corros., 2003, vol. 54 (10), pp. 756–6210.1002/maco.200303737 ↗
26. A. Schneider, H.J. Grabke: Mater. Corros., 2003, vol. 54 (10), pp. 793–9810.1002/maco.200303735 ↗
27. F.D. Gabriele, J.R. Bernstein, M.M. Al-Qhatani, Z. Liu, M.P. Jordan, J.A. Richardson, F.H. Stott: Mater. Corros., 2003, vol. 54 (11), pp. 854–5910.1002/maco.200303728 ↗
28. A.T.W. Kempen, J.C. Wortel: Mater. Corros., 2004, vol. 55 (4), pp. 249–5810.1002/maco.200303720 ↗
29. Y. Nishiyama, T. Kudo, N. Otsuka: Mater. Trans., 2005, vol. 46 (8), pp. 1890–9610.2320/matertrans.46.1890 ↗
30. R. Kirchheiner, D.J. Young, P. Becker, and R.N. Durham: Corrosion/2005, Paper No. 5428, NACE International, Houston, TX, 2005
31. H. Stahl, S. Gyde Thomsen: Ammonia Plant Saf. Relat. Facil., 1996, vol. 36, pp. 180–91
32. S.B. Parks, C.M. Schillmoller: Stainless Steel World, 1997, vol. 9 (3), pp. 44–49
33. H.J. De Bruyn, B. Schmid, Ø. Grong, and J.Z. Albertsen: Corrosion/2005, Paper No. 5413, NACE International, Houston, TX
34. K. Hirotani: Proc. 15th Int. Offshore and Polar Eng. Conf., The International Society of Offshore and Polar Engineers, Seoul, Korea, 2005, pp. 54–61
35. J.Z. Albertsen: Doctoral Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2007
36. H.J. Grabke: Mater. Corros., 2003, vol. 54 (10), pp. 736–4610.1002/maco.200303729 ↗
37. Y. Nishiyama, N. Otsuka, T. Kudo, and O. Miyahara: Corrosion/2003, Paper No. 3471, NACE International, Houston, TX
38. I. Koszman: in High Temperature Gas-Metal Reactions in Mixed Environments, A. Jansson, Z.A. Foroulis, eds., AIME, New York, NY, 1973, pp. 155–67
39. P. Elliott: Corrosion/2000, Paper No. 527, NACE International, Houston, TX, 2000
40. S.R. Shatynski, H.J. Grabke: Arch. für das Eisenhüttenwesen, 1978, vol. 49 (3), pp. 129–3310.1002/srin.197805109 ↗
41. H.J. Grabke: Scripta Metall., 1975, vol. 9 (11), pp. 1181–8410.1016/0036-9748(75)90404-4 ↗
42. H.J. Grabke, A. Schnaas: in Alloy 800, W. Betteridge, ed., Petten, The Netherlands, 1978, pp. 195–211
43. R. Petkovic-Luton, T.A. Ramanarayanan: Oxid. Met., 1990, vol. 34 (5–6), pp. 381–40010.1007/BF00664423 ↗
44. A. Perkins: in Behaviour of High Temperature Alloys in Aggressive Environments, Petten, The Netherlands, 1980, pp. 617–47
45. X.G. Zheng, D.J. Young: Oxid. Met, 1994, vol. 42 (3–4), pp. 163–9010.1007/BF01052021 ↗
46. H.J. Grabke and E.M. Müller-Lorenz: Corrosion/2001, Paper No. 1373, NACE International, Houston, TX, 2001
47. B. Schmid, Ø. Grong, R. Ødegård: Mater. Corros., 1999, vol. 50 (11), pp. 647–5310.1002/(SICI)1521-4176(199911)50:11<647::AID-MACO647>3.0.CO;2-# ↗
48. O.V.D. Biest, J.M. Harrison, J.F. Norton: Int. Conf. Behaviour of High Temperature Alloys in Aggressive Environments, I. Kirman, ed., The Metals Society, London, 1979, pp. 681–703
49. M. Hänsel, C.A. Boddington, D.J. Young: Corros. Sci., 2003, vol. 45, pp. 967–8110.1016/S0010-938X(02)00182-8 ↗
50. Y. Nishiyama, N. Otsuka, T. Kudo: Corros. Sci., 2006, vol. 48 (8), pp. 2064–8310.1016/j.corsci.2005.08.008 ↗
51. R.A. Perkins, W. Coons, D.J. Radd: in Properties of High Temperature Alloys, With Emphasis on Environmental Effects, The Electrochemical Society, Princeton, NJ, 1976, pp. 733–49
52. P. Szakálos: Doctoral Thesis, Royal Institute of Technology, Stockholm, 2004
53. J.Z. Albertsen, Ø. Grong, R.H. Mathiesen, B. Schmid: Corros. Eng., Sci. Technol., 2005, vol. 40 (3), pp. 239–4310.1179/174327805X66290 ↗
54. M.J. Donachie, S.J. Donachie: Superalloys—A Technical Guide, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 200210.31399/asm.tb.stg2.9781627082679 ↗
55. J. Wilson and D.C. Agarwal: Corrosion/2005, Paper No. 5423, NACE International, Houston, TX, 2005
56. B.A. Baker, G.D. Smith, V.W. Hartmann, L.E. Shoemaker, and S.A. McCoy: Corrosion/2002, Paper No. 2394, NACE International, Houston, TX, 2002
57. ESRF: www.esrf.fr/exp_facilities/BM1A/index.htm, 2005
58. L.A. Giannuzzi, F.A. Stevie: Micron, 1999, vol. 30 (3), pp. 197–20410.1016/S0968-4328(99)00005-0 ↗
59. R. Kilaas: MacTempas, 1992
60. P. Villars, L.D. Calvert, W.B. Pearson: Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, 1st ed., ASM INTERNATIONAL, Metals Park, OH, 1985
61. FactSage: www.factsage.com, 2005
62. CRCT-ThermFact-Inc, GTT-Technologies: FACT 53. Compound Database, 2005
63. J. Cranck: The Mathematics of Diffusion, 2nd ed., Clarenden Press, Oxford, United Kingdom, 1975
64. P.G. Shewmon: Diffusion in Solids, 1st ed., McGraw-Hill Book Company, New York, NY, 1963
65. C. Wagner: Z. Elektrochem., 1959, vol. 63, pp. 772–82
66. U. Krupp, H.J. Christ: J. Phase Equilib. Diffus., 2005, vol. 26 (5), pp. 487–9310.1361/154770305X66592 ↗
67. R.F. Hochman: Proc. 3rd Int. Cong. Metallic Corrosion, University of Moscow Press, Moscow, 1969, pp. 119–33
68. R.G. Olsson, E.T. Turkdogan: Metall. Trans., 1974, vol. 5, pp. 21–2610.1007/BF02642920 ↗
69. G.A. Jablonski, A. Geurts, J. Sacco, R.R. Biederman: Carbon, 1992, vol. 30 (1), pp. 87–9810.1016/0008-6223(92)90111-9 ↗
70. H.J. Grabke: Corrosion, 1995, vol. 51 (9), pp. 711–2010.5006/1.3293634 ↗
71. R. Yin: Oxid. Met., 2003, vol. 60 (1–2), pp. 103–11610.1023/A:1024669430565 ↗
72. Q. Wei, E. Pippel, J. Woltersdorf, H.J. Grabke: Mater. Corros., 1999, vol. 50 (11), pp. 628–3310.1002/(SICI)1521-4176(199911)50:11<628::AID-MACO628>3.0.CO;2-3 ↗
73. J.C. Nava Paz, H.J. Grabke: Oxid. Met., 1993, vol. 39 (5–6), pp. 437–5610.1007/BF00664665 ↗
74. E. Pippel, J. Woltersdorf, R. Schneider: Mater. Corros., 1998, vol. 49 (5), pp. 309–1610.1002/(SICI)1521-4176(199805)49:5<309::AID-MACO309>3.0.CO;2-1 ↗
75. J.L. Meijering: in Advances in Materials Research, H. Herman, ed., Wiley-Interscience Publishers, New York, NY, 1971, pp. 1–81
76. J.P. Neumann, T. Zhong, Y.A. Chang: Bull. Alloy Phase Diagr., 1984, vol. 5 (2), pp. 141–4310.1007/BF02868949 ↗
77. A. Engström: Doctoral Thesis, Royal Institute of Technology, Stockholm, 1996
78. T. Rosenqvist: Principles of Extractive Metallurgy, 2nd ed., McGraw-Hill International Book Company, Singapore, 1983
79. D.R. Askeland: The Science and Engineering of Materials, 3rd ed., Stanley Thornes Publishers, Ltd., Cheltenham, 1998
80. Z. Zeng, K. Natesan: Chem. Mater., 2005, vol. 17 (14), pp. 3794–380110.1021/cm050712u ↗
81. R. Schneider, E. Pippel, J. Woltersdorf, S. Strauss, H.J. Grabke: Steel Res., 1997, vol. 68 (7), pp. 326–3210.1002/srin.199701796 ↗
82. P. Szakálos, M. Lundberg, R. Pettersson: Corros. Sci., 2006, vol. 48 (7), pp. 1679–9510.1016/j.corsci.2005.05.023 ↗
83. G. Aylward, T. Findlay: SI Chemical Data, 3rd ed., John Wiley & Sons, Brisbane, 1994