Comparative microstructural characterization of a friction-stir-welded aluminum alloy using TEM and SEM-based techniques
Source abstract
Abstract
Comparison is made between images collected using four different transmission electron microscopy (TEM) and scanning electron microscopy (SEM) techniques from the same region of a commercial Al alloy processed by friction-stir welding. The techniques include conventional bright-field TEM, electron-channeling contrast (ECC) imaging using SEM, gallium-enhanced microscopy (GEM), and the electron backscattered diffraction (EBSD) technique. It is found that for a microstructure with a large range of misorientations, only investigation with TEM is capable of revealing all the dislocation boundaries present in a given region, although this requires careful tilting. Single-tilt TEM images, EBSD maps, as well as ECC and GEM images miss a certain population of boundaries, which can lead to erroneous results when the boundary spacing is evaluated. For the EBSD data, the calculated fraction of high-angle boundaries can vary over a large range, depending on the choice of data-processing parameters. The number of missed boundaries is relatively small for the single-tilt TEM images, GEM images, and postprocessed (filtered) EBSD maps. These images can, therefore, be considered to give a good compromise between the required experimental effort and the resulting data quality.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
2. J.H. Driver, D.J. Jensen, and N. Hansen: Acta Metall. Mater., 1994, vol. 42, pp. 3105–14.10.1016/0956-7151(94)90408-1 ↗
3. Q. Liu, C. Maurice, J. Driver, and N. Hansen: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2333–44.10.1007/s11661-998-0110-5 ↗
4. X. Huang and D.J. Jensen: in Electron Backscatter Diffraction in Materials Science, A.J. Schwartz et al., eds., Kluwer Academic/Plenum Publishers, New York, NY, 2000, pp. 265–76.10.1007/978-1-4757-3205-4_21 ↗
5. M.C. Demirel, B.S. El-Dasher, B.L. Adams, and A.D. Rollett: in Electron Backscatter Diffraction in Materials Science, A.J. Schwartz et al., eds., Kluwer Academic/Plenum Publishers, New York, NY, 2000, pp. 65–74.10.1007/978-1-4757-3205-4_6 ↗
6. D.P. Field and H. Weiland: in Electron Backscatter Diffraction in Materials Science, A.J. Schwartz et al., eds., Kluwer Academic/Plenum Publishers, New York, NY, 2000, pp. 199–212.10.1007/978-1-4757-3205-4_17 ↗
7. F.J. Humphreys, P.S. Bate, and P.J. Hurley: J. Microsc., 2001, vol. 1, pp. 50–58 and 201.10.1046/j.1365-2818.2001.00777.x ↗
8. J. Hagström, O.V. Mishin, and B. Hutchinson: Scripta Mater., 2003, vol. 49, pp. 1035–40.10.1016/S1359-6462(03)00442-1 ↗
9. H.-E. Ekström, O.V. Mishin, and L. Östensson: Proc. ICAA9, J.F. Nie, A.J. Morton, and B.C. Muddle, eds., Institute of Materials Engineering Australasia Ltd., Brisbane, Australia, 2004, pp. 252–57.
10. J. Hagström: Proc. ICAA9, J.F. Nie, A.J. Morton, and B.C. Muddle, eds., Institute of Materials Engineering Australasia Ltd., Brisbane, Australia, 2004, pp. 305–11.
11. H. Jin, S. Saimoto, M. Ball, and P.L. Threadgill: Mater. Sci. Technol., 2001, vol. 17, pp. 1605–14.10.1179/026708301101509674 ↗
12. D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata: Metall. Mater. Trans A, vol. 32A, 2001, pp. 2869–77.10.1007/s11661-001-1037-2 ↗
13. K.V. Jata and S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 743–49.10.1016/S1359-6462(00)00480-2 ↗
14. Ø. Frigaard, Ø. Grong, and O.T. Midling: Metall. Mater. Trans A, 2001, vol. 32A, pp. 1189–1200.10.1007/s11661-001-0128-4 ↗
15. B. Heinz and B. Skrotzki: Metall. Mater. Trans B, 2002, vol. 33B, pp. 489–98.10.1007/s11663-002-0059-5 ↗
16. R.W. Fonda and J.F. Bingert: Metall. Mater. Trans A, 2004, vol. 35A, pp. 1487–99.10.1007/s11661-004-0257-7 ↗
17. Q. Liu: Ultramicroscopy, 1995, vol. 60, pp. 81–89.10.1016/0304-3991(95)00049-7 ↗
18. W.Q. Cao, A. Godfrey, and Q. Liu: Mater. Sci. Eng. A, 2003, vol. A361, pp. 9–14.10.1016/S0921-5093(03)00055-8 ↗
19. W.Q. Cao, A. Godfrey, and Q. Liu: J. Microsc., 2003, vol. 211, pp. 219–29.10.1046/j.1365-2818.2003.01212.x ↗
20. O.V. Mishin, A. Godfrey, Q. Liu, and D.J. Jensen: Proc. 25th Risø Int. Symp. on Materials Science, C. Gundlach, K. Haldrup, N. Hansen, X. Huang, D. Juul Jensen, T. Leffers, Z.J. Li, S.F. Nielsen, W. Pantleon, J.A. Wert, and G. Winther, eds., Risø National Laboratory, Roskilde, Denmark, 2004, pp. 445–51.