The Effect of Graphite Fraction and Morphology on the Plastic Deformation Behavior of Cast Irons
Source abstract
Abstract
The plastic deformation behavior of cast irons, covering the majority of graphite morphologies, has not been comprehensively studied previously. In this investigation, the effect of graphite morphology and graphite fraction on the plastic deformation behavior of pearlitic cast irons has been evaluated. The investigation is based on tensile tests performed on various different cast iron grades, where the graphite morphology and volume fraction have been varied. Pearlitic steel with alloying levels corresponding to the cast irons were also studied to evaluate how the cast iron matrix behaves in tension without the effects of the graphite phase. It is concluded that as the roundness of the graphite phase increases, the strain hardening exponent decreases. This demonstrates that the amount of plastic deformation is higher in the matrix of lamellar cast iron grades compared to compacted and nodular cast iron grades. Furthermore, this study shows that the strength coefficient in flake graphite cast irons increases as the graphite fraction decreases due to the weakening effect of the graphite phase. This study presents relationships between the strain hardening exponent and the strength coefficient and the roundness and fraction of the graphite phase. Using these correlations to model the plastic part of the stress-strain curves of pearlitic cast irons, we were able to calculate curves in good agreement with experimentally determined curves, especially for gray cast irons and ductile iron.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. T. Sjögren, I.L. Svensson: Int. J. Cast Met. Res., 2005, 18(4):249–5610.1179/136404605225023117 ↗
2. J.H. Hollomon: Trans. AIME, 1945, 162:268–90
3. W. Soboyejo: Mechanical Properties of Engineered Materials, Marcel Dekker Inc., New York, NY, 2003, p. 117
4. T. Sjögren, I.L. Svensson: Int. J. Cast Met. Res., 2004, 17(5):271–7910.1179/136404604225022694 ↗
5. SinterCast Nodularity Rating Chart, SinterCast, Katrineholm, Sweden, 1997
6. H.T. Angus: Cast Iron: Physical and Engineering Properties, 2nd ed., Butterworth and Co., London, 1976, p. 150
7. J.M. Hyzak, I.M. Bernstein: Metall. Trans. A, 1976, 7A:1217–2410.1007/BF02656606 ↗
8. H. Era, K. Kishitake, K. Nagai, Z.Z. Zhang: Mater. Sci. Technol., 1992, 8(3):257–6110.1179/mst.1992.8.3.257 ↗
9. S. Wolfensberger, P. Uggowitzer, M.O. Speidel: Giessereiforschung, 1987, 39(3):129–32
10. C. Hellier: Handbook of Nondestructive Evaluation, McGraw-Hill, New York, NY, 2001, p. 103