Global and Local Mechanical Properties of Autogenously Laser Welded Ti-6Al-4V
Source abstract
Abstract
Ti-6Al-4V sheets, 3.2-mm in thickness, were butt welded using a continuous wave 4 kW Nd:YAG laser welding system. The effect of two main process parameters, laser power and welding speed, on the joint integrity was characterized in terms of the joint geometry, defects, microstructure, hardness, and tensile properties. In particular, a digital image correlation technique was used to determine the local tensile properties of the welds. It was determined that a wide range of heat inputs can be used to fully penetrate the Ti-6Al-4V butt joints during laser welding. At high laser power levels, however, significant defects such as underfill and porosity, can occur and cause marked degradation in the joint integrity and performance. At low welding speeds, however, significant porosity occurs due to its growth and the potential collapse of instable keyholes. Intermediate to relatively high levels of heat input allow maximization of the joint integrity and performance by limiting the underfill and porosity defects. In considering the effect of the two main defects on the joint integrity, the underfill defect was found to be more damaging to the mechanical performance of the weldment than the porosity. Specifically, it was determined that the maximum tolerable underfill depth for Ti-6Al-4V is approximately 6 pct of the workpiece thickness, which is slightly stricter than the value of 7 pct specified in AWS D17.1 for fusion welding in aerospace applications. Hence, employing optimized laser process parameters allows the underfill depth to be maintained within the tolerable limit (6 pct), which in turn prevents degradation in both the weld strength and ductility. To this end, the ability to maintain weld ductility in Ti-6Al-4V by means of applying a high energy density laser welding process presents a significant advantage over conventional arc welding for the assembly of aerospace components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. M.J. Donachie, Titanium: A Technical Guide, ASM International, Materials Park, OH, 1989.
2. J.L. Barreda, F. Santamaría, X. Azpiroz, A.M. Irisarri, J.M. Varona, Vacuum 62 (2001) 143-150.10.1016/S0042-207X(00)00454-1 ↗
3. Q. Yunlian, D. Ju, H. Quan, Z. Liying, Materials Science and Engineering A 280 (2000) 177-181.10.1016/S0921-5093(99)00662-0 ↗
4. E. Akman, A. Demir, T. Canel, T. Sinmazçelik, Journal of Materials Processing Technology 209 (2009) 3705-3713.10.1016/j.jmatprotec.2008.08.026 ↗
5. A.H. Kazzaz, M. Medraj, X. Cao, M. Jahazi, and M. Xiao: in 44th Annual Conference of Metallurgist of CIM, Calgary, AL, J.P. Martin, ed., 2005, pp. 137–49.
6. D.L. Olson, T.A. Siewert, S. Liu, and G.R. Edwards: ASM Handbook, Welding, Brazing, and Soldering, ASM International, Materials Park, OH, 1993.10.31399/asm.hb.v06.9781627081733 ↗
7. A. Costa, R. Miranda, L. Quintino, D. Yapp, Materials and Manufacturing Processes 22 (2007) 798-803.10.1080/10426910701446671 ↗
8. A.S.H. Kabir, X. Cao, J.G. Baradari, P. Wanjara, J. Cuddy, A. Birur, M. Medraj, Advanced Materials Research 400 (2012) 857-862.
9. A.S.H. Kabir, X. Cao, P. Wanjara, J. Cuddy, A. Birur, M. Medraj, Canadian Metallurgical Quarterly 51 (2012) 320-327.10.1179/1879139512Y.0000000016 ↗
10. A.S.H. Kabir, X. Cao, P. Wanjara, J. Gholipour, J. Cuddy, A. Birur, and M. Medraj: in MS&T2010: Laser Applications in Materials Processing, 17–21 October 2010, Houston, TX, S. Copley, J. Schneider, and A. Black, eds., 2010, pp. 2787–97.
11. A. Kabir, X. Cao, J. Gholipour, P. Wanjara, J. Cuddy, A. Birur, M. Medraj, Metallurgical and Materials Transactions A 43 (2012) 4171-4184.10.1007/s11661-012-1230-5 ↗
12. W.D. Lockwood, A.P. Reynolds, Materials Science and Engineering A 339 (2003) 35-42.10.1016/S0921-5093(02)00116-8 ↗
13. W.D. Lockwood, B. Tomaz, A.P. Reynolds, Materials Science and Engineering A 323 (2002) 348-353.10.1016/S0921-5093(01)01385-5 ↗
14. B. Boyce, P. Reu, C. Robino, Metallurgical and Materials Transactions A 37 (2006) 2481-2492.10.1007/BF02586221 ↗
15. ASTM, Standard Test Methods for Tension Testing of Metallic Materials E 8M-04, American Society for Testing and Materials, Materials Park, OH, 2004.
16. P. Rastogi, M. Sutton, S. McNeill, J. Helm, Y. Chao, Photomechanics, Springer Berlin/Heidelberg, 2000, pp. 323-372.10.1007/3-540-48800-6 ↗
17. X. Cao, G. Debaecker, E. Poirier, S. Marya, J. Cuddy, A. Birur, P. Wanjara, J. Laser Appl. 23, 012004 (2011).10.2351/1.3554266 ↗
18. C. Dawes, Laser Welding, McGraw-Hill, Inc, NY, 1992.10.1533/9781845698843 ↗
19. X. Cao, M. Jahazi, J.P. Immarigeon, W. Wallace, Journal of Materials Processing Technology 171 (2006) 188-204.10.1016/j.jmatprotec.2005.06.068 ↗
20. Z. Khaled, Journal of Materials Engineering and Performance 3 (1994) 419-434.10.1007/BF02645341 ↗
21. D.R. Mitchell, Welding Journal 61 (1982) 157s-167s.
22. F. Karimzadeh, M. Salehi, A. Saatchi, M. Meratian, Materials and Manufacturing Processes 20 (2005) 205 - 219.10.1081/AMP-200041857 ↗
23. G. Lutjering, J.C. Williams, Titanium, 2 ed., Springer, Berlin, 2007.
24. M. Pastor, H. Zhao, T. DebRoy, Revista de Metalurgia 36 (2000) 108-117.10.3989/revmetalm.2000.v36.i2.562 ↗
25. T. Mohandas, D. Banerjee, V. Kutumba Rao, Metallurgical and Materials Transactions A 30 (1999) 789-798.10.1007/s11661-999-1011-y ↗
26. A. Matsunawa, J.-D. Kim, N. Seto, M. Mizutani, S. Katayama, Journal of Laser Applications 10 (1998) 247-254.10.2351/1.521858 ↗
27. AWS, Specification for Fusion Welding for Aerospace Application, D17.1, American Welding Society, Miami, OH, 2001.
28. M. Pastor, H. Zhao, R.P. Martukanitz, and T. DebRoy, Weld. J. (1999) 78, 207s–16s.
29. X. He, T. DebRoy, P.W. Fuerschbach, Journal of Physics D: Applied Physics 36 (2003) 3079.10.1088/0022-3727/36/23/033 ↗
30. X. He, J.T. Norris, P.W. Fuerschbach, T. DebRoy, Journal of Physics D: Applied Physics 39 (2006) 525.10.1088/0022-3727/39/3/016 ↗
31. X. Cao, M. Jahazi, Optics and Lasers in Engineering 47 (2009) 1231-1241.10.1016/j.optlaseng.2009.05.010 ↗
32. J. Weston, A. Jones, and R. Wallach: Proceedings of the 6th International Conference on Welding and Melting by Electron and Laser Beams, Toulon, France, 1998, p. 187.
33. A.B. Short, Materials Science and Technology 25 (2009) 309-324.10.1179/174328408X389463 ↗
34. T. Ahmed, H.J. Rack, Materials science & engineering A 243 (1998) 206-211.10.1016/S0921-5093(97)00802-2 ↗
35. Z. Sun, D. Pan, and W. Zhang: Sixth International Conference on Trends in Welding Research, Pine Mountain, Georgia, USA, 2002, pp. 760–67.
36. G.A. Knorovsky, P.W. Fuerschbach, S.E. Gianoulakis, and S.N. Burchett: in Trends in Welding Research: Proceedings of the 4th International Conference, 5–9 June 1995, Gatlinburg, TN, H.B. Smartt, J.A. Johnson, and S.A. David, eds., 1995, pp. 479–86.
37. Y. Lee, M. Peters, G. Welsch, Metall. Trans. A 22 (1991) 709-714.10.1007/BF02670293 ↗
38. P. Wanjara, M. Brochu, and M. Jahazi, Mater. Manuf. Process 21 (2006) 439–51.10.1080/10426910500471425 ↗