journal article·2000-09

Microstructural evolution in ultra-low-carbon steel weldments—Part I: Controlled thermal cycling and continuous cooling transformation diagram of the weld metal

R. W. Fonda, G. Spanos

Publisher page

Abstract

The transformation behavior and microstructural evolution of the as-deposited weld metal from an ultra-low-carbon (ULC) weldment were characterized by dilatometry, optical microscopy, transmission electron microscopy, and microhardness measurements. These results were used to construct a continuous cooling transformation (CCT) diagram for this weld metal. The major microconstituents observed in this ULC weldment were (in order of decreasing cooling rate) coarse autotempered martensite, fine lath martensite, lath ferrite, and degenerate lath ferrite. No polygonal ferrite was observed. These results were also used to develop criteria to differentiate between the two predominant microstructures in these ULC steels, lath martensite, and lath ferrite, which can look quite similar but have very different properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. G. Tither: HSLA Steels: Processing, Properties and Applications, TMS, Warrendale, PA, 1992, pp. 61–80.
2. J.J. Deloach, Jr.: in Welding and Weld Automation in Shipbuilding, R. Dinale, ed., TMS, Warrendale, PA, 1996, pp. 85–104.
3. E.J. Czyryca, R.E. Link, R.J. Wong, D.A. Aylor, T.W. Montemarano, and J.P. Gudas: Naval Eng. J., 1990, vol. 102 (3), pp. 63–81.10.1111/j.1559-3584.1990.tb02632.x ↗
4. E.J. Czyryca and M.G. Vassilaros: Naval Surface Warfare Center Report No. CARDEROCKDIV-SME-92/64, Naval Surface Warfare Center, Washington, DC., Apr. 1993.
5. H.K.D.H. Bhadeshia: Steel Technology International, Sterling Publications, London, 1998, pp. 289–94.
6. A. Cullison: Weld. J., 1995, Jan., pp. 51–53.10.1016/S0262-1762(99)80951-1 ↗
7. P.L. Harrison and R.A. Farrar: Int. Mater. Rev., 1989, vol. 34 (1), pp. 35–51.10.1179/imr.1989.34.1.35 ↗
8. “Military Specification Electrodes and Rods—Welding, Bare, Solid, or Alloy Cored; and Fluxes, Low Alloy Steel,” MIL-E-23765/2E, Apr. 22, 1994, Naval Sea Systems Command, Arlington, VA.
9. G. Krauss: Steels: Heat Treatment and Processing Principles, ASM International, Metals Park, OH, 1990.
10. L. Zhang and D.C. Guo: Mater. Characterization, 1993, vol. 30 (4), pp. 299–305.10.1016/1044-5803(93)90078-A ↗
11. G. Spanos, R.W. Fonda, R.A. Vandermeer, and A. Matuszeski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3277–91.10.1007/BF02669455 ↗
12. H. Abrams: Metallography, vol. 4, pp. 59–78.10.1016/0026-0800(71)90005-X ↗
13. Annual Book of ASTM Standards, ASTM Designation E384-84, ASTM, Philadelphia, PA, 1989, vol. 03.01, pp. 469–83.
14. R.W. Fonda, R.A. Vandermeer, and G. Spanos: “Continuous Cooling Transformation (CCT) Diagrams for Advanced Navy Welding Consumables,” Naval Research Laboratory Report No. NRL/MR/6324-98-8185, July 1998, available through NRL Public Affairs Office, Washington, DC.
15. R.A. Vandermeer, R.W. Fonda, And G. Spanos: Naval Research Laboratory, Washington, DC., unpublished research, 1998.
16. K.E. Easterling: Recent Trends in Welding Science and Technology, TWR ’89, ASM International, Metals Park, OH, 1990, pp. 177–88.
17. C.A. Dube, H.I. Aaronson, and R.F. Mehl: Rev. Metall., 1958, vol. 55, p. 201.10.1051/metal/195855030201 ↗
18. H.I. Aaronson: Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds. Interscience, New York, NY, 1962, pp. 387–548.
19. D.J. Widgery: Weld. J. Res. Suppl., 1976, vol. 55, pp. 57s-68s.
20. R.C. Cochrane: “Weld Metal Microstructures and Terminology,” CEGB Report T/PDM/462/1/77/C, 1977, Teesside Laboratories, Middleborough, UK.
21. B.G. Kenny, H.W. Kerr, R.B. Lazor, and B. Graville: Met. Const., 1985, vol. 17, pp. 374B-381B.
22. D.J. Abson and R.E. Dolby: Weld. Inst. Res. Bull., 1980, vol. 21 (4), pp. 100–03; IIW Document No. IXJ-29-80.
23. “Guide to the Light Microscope Examination of Ferritic Steel Weld Metals,” Weld World, 1991, vol. 29, pp. 160–77, IIW Document No. IX-1533-88/IXJ-123-87 Revision 2, June 1988.
24. P.L. Harrison, M.N. Watson, and R.A. Farrar: Weld. Met. Fab., 1981, vol. 49, pp. 161–69.
25. P.L. Harrison and R.A. Farrar: Met. Constr., 1987, vol. 19, pp. 392R-399R.
26. Z. Zhang and R.A. Farrar: An Atlas of Continuous Cooling Transformation (CCT) Diagrams Applicable to Low Carbon Low Alloy Weld Metals, The Institute of Metals, London, 1995, pp. 1–4.
27. R.F. Hehemann, K.R. Kinsman, and H.I. Aaronson: Metall. Trans., 1972, vol. 3, pp. 1077–94.10.1007/BF02642439 ↗
28. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
29. H.I. Aaronson: The Mechanisms of Phase Transformations in Crystalline Solids, Monograph 33, Institute of Metals, London, 1969, pp. 270–81.
30. R.W. Fonda, G. Spanos, and R.A. Vandermeer: Scripta Metall. Mater., 1994, vol. 31 (6), pp. 683–88.10.1016/0956-716X(94)90210-0 ↗
31. P.G. Boswell, K.R. Kinsman, G.J. Shiflet, and H.I. Aaronson: in Mechanical Properties and Phase Transformations in Engineering Materials, S.D. Antolovich, R.O. Richie, and W.W. Gerberich, eds., TMS-AIME, Warrendale, PA, 1986, p. 445–66.
32. C.M. Wayman: “Ferrous Martensites,” Special Report No. 93, Iron and Steel Institute, London, 1965, pp. 153–63.
33. S.K. Das and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 325–27.10.1007/BF02819291 ↗
34. G. Spanos, D.W. Moon, R.W. Fonda, E.S.K. Menon, and A.G. Fox: in Trends in Welding Research, J.M. Vitek, S.A. David, J.A. Johnson, H.B. Smartt, and T. DebRoy, eds., ASM INTERNATIONAL, Metals Park, OH, 1999, pp. 191–96.
35. D.J. Abson, R.E. Dolby, and P.H.M. Hart: Proc. Conf. on Trends in Steels and Consumables for Welding, The Welding Institute, Abington, 1979, pp. 75–101.