journal article·2002-01Open access

Study of the kinetics of the recrystallization of cold-rolled low-carbon steel

C. E. Rodríguez Torres, F. H. Sánchez, A. González, F. Actis, R. Herreara

Abstract

The suitability of the differential scanning calorimetry (DSC) technique for the quantitative study of the recrystallization process in cold-rolled steels is demonstrated, the recrystallization kinetics was described with a semiempirical model, and the transformation of a cold-rolled steel submitted to an industrial-batch thermal cycle was appropriately simulated. It was found that the activation energy for the recrystallization process depends on the heating-rate range, having values of 522 ± 13 and 259 ± 12 kJ/mole for low and high heating rates, respectively. It was concluded that the smallest value corresponds to the recrystallization process alone, while the largest one contains an additional contribution from the aluminium nitride precipitation. It is also shown that the X-ray diffraction (XRD) line-width measurement is a useful complementary method to determine the temperature regions where recovery and recrystallization occur.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. W. Bleck, W. Müschenborn, and L. Meyer: Steel Res., 1988, vol. 59, p. 334.10.1002/srin.198801525 ↗
2. C. Liu, A.J.C. Burghardt, T.H. Jacobs, and J.J.F. Scheffer: 37th MWSP Conf. Proc., ISS, 1996, vol. 33, p. 963.
3. K. Mukunthan and E.B. Hawbolt: Metall. Mater. Trans. A, 1996, vol. 27A, p. 3410.10.1007/BF02595434 ↗
4. J.W. Christian: The Theory of Phase Transformations in Metals and Alloys, Pergamon Press, New York, NY, 1975, [Part I].
5. F.L. Cumbrera and F. Sánchez-Bajo: Thermochim. Acta, 1989, vol. 14, p. 7231.
6. C.W. Price: Acta Metall. Mater., 1990, vol. 38, p. 727.10.1016/0956-7151(90)90024-B ↗
7. P. Krüger and E. Woldt: Acta Metall. Mater., 1992, vol. 40, p. 2933.10.1016/0956-7151(92)90457-P ↗
8. A.D. Rollett, D.J. Srolovitz, R.D. Doherty, and M.P. Anderson: Acta Metall., 1989, vol. 37, p. 627.10.1016/0001-6160(89)90247-2 ↗
9. J.H. Sharp and S.A. Wentworth: Anal. Ceram. Soc., 1969, vol. 41, p. 2060.
10. J.M. Criado: Thermochim. Acta, 1978, vol. 24, p. 186.10.1016/0040-6031(78)85151-X ↗
11. J.M. Criado, J. Málek, and A. Ortega: Thermochim. Acta, 1989, vol. 147, p. 377.10.1016/0040-6031(89)85192-5 ↗
12. J.M. Criado, A. Ortega, and F. Gotoi: Thermochim. Acta, 1990, vol. 157, p. 171.10.1016/0040-6031(90)80018-T ↗
13. J. Málek: Thermochim. Acta, 1989, vol. 138, p. 337.10.1016/0040-6031(89)87270-3 ↗
14. J. Málek: Thermochim. Acta, 2000, vol. 355, p. 239.10.1016/S0040-6031(00)00449-4 ↗
15. J. Málek: Thermochim. Acta, 1995, vol. 267, p. 61.10.1016/0040-6031(95)02466-2 ↗
16. H.L. Friedman: J. Polymer Sci. Part C. Polymer Lett., 1964, vol. 6, p. 183.
17. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Co., Reading, MA, 1978, p. 281.
18. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 1994, vol. 39, p. 129.10.1179/imr.1994.39.4.129 ↗
19. F.G. Wilson and T. Gladman: Int. Mater. Rev., 1988, vol. 33, p. 221.10.1179/imr.1988.33.1.221 ↗
20. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, United Kingdom, pp. 195–96.