Surface hardening of Ti alloys by gas-phase nitridation: Kinetic control of the nitrogen surface activity
Source abstract
Abstract
A new concept for surface hardening of titanium alloys has been developed and successfully applied to Ti-6Al-4V alloys: gas-phase nitridation under kinetic control of the nitrogen activity. This method avoids the formation of detrimental second-phase nitrides by nitriding under a very low nitrogen activity, combined with rapid diffusion of nitrogen into the specimen. The surface hardness of the Ti-6Al-4V alloy was increased by a factor of 2 to ≈ 12 GPa, with only modest attenuation of ductility. We have realized conditions for generating case depths of ≈ 25 µm in reasonable nitridation times. The nitrogen activity in the gas phase is generated by heating a powder pack of Cr and Cr2N. A closed two-zone system allows the powder pack and the specimen to be at different temperatures, optimizing both the nitrogen partial pressure and the nitrogen diffusion into the specimen. This low-cost, conformal nitridation process generates a smoothly graded nitrogen concentration profile and can be applied to finished Ti alloy components.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Energetic Materials and Combustion · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. T. Bell, H.W. Bergmann, J. Lanagan, P.H. Morton, and A.M. Staines Surface Eng., 1986, vol. 2, pp. 133–43.10.1179/sur.1986.2.2.133 ↗
2. T. Sato and K. Akashi: J. Jpn. Inst. Light Met., 1992, vol. 42, p. 650.10.2464/jilm.42.650 ↗
3. N. Yasumaru, K. Tsuchida, E. Saji, and T. Ibe: J. Jpn. Inst. Met., 1992, vol. 56, pp. 104–10.10.2320/jinstmet1952.56.1_104 ↗
4. N. Yasumaru, K. Tsuchida, E. Saji, and T. Ibe: Mater. Trans., JIM, 1993, vol. 34, pp. 692–702.10.2320/matertrans1989.34.696 ↗
5. H.J. Spies, B. Larisch, K. Hoeck, E. Broszeit, and H.J. Schroeder: Surface Coatings Technol., 1995, vol. 178, pp. 74–75.
6. H. Dong, A. Bloyce, and T. Bell: in Surface Performance of Titanium, J.K. Gregory, H.J. Rack, and D. Eylon, eds., TMS, Warrendale, PA, 1996, pp. 23–31.
7. T.A. Panaioti: Metalloed. Termicheskaya Obrabotka Metall., 1998, vol. 40, pp. 32–35.
8. Z. Okamoto, H. Hoshika, and M. Yakushiji: Technology Reports of Kansai University, Kansai University, 2001, pp. 167–77.
9. A. Bloyce: Proc. Institute of Mechanical Engineers, Part J, J. Eng. Tribol., 1998, vol. 212, pp. 467–76.10.1243/1350650981542263 ↗
10. J.L. Viviente, A. Garcia, A. Loinaz, F. Alonso, and J.I. Onate: Vacuum, 1999, vol. 52, pp. 141–46.10.1016/S0042-207X(98)00213-9 ↗
11. F.D. Lai, T.I. Wu, and J.K. Wu: Surface Coatings Technol., 1993, vol. 58, pp. 79–82.10.1016/0257-8972(93)90177-P ↗
12. T.I. Wu and J.K. Wu: Surface Coatings Technol., 1997, vol. 90, pp. 258–67.10.1016/S0257-8972(96)03134-9 ↗
13. T.I. Wu and J.K. Wu: Scripta Metall. Mater., 1991, vol. 25, pp. 2335–38.10.1016/0956-716X(91)90025-V ↗
14. T.I. Wu and J.K. Wu: Metall. Trans. A, 1993, vol. 24A, pp. 1181–85.10.1007/BF02657249 ↗
15. H.M. Flower, A. Walker, and D.R.F. West: Scripta Metall., 1985, vol. 19, pp. 923–26.10.1016/0036-9748(85)90283-2 ↗
16. M. Okutomi, A. Obara, K. Tsukamoto, and H.L. Shen: Proc. SPIE-Int. Soc. for Optical Eng., 1998, vol. 3550, pp. 229–36.
17. M. Okutomi, A. Obara, and K. Tsukamoto: Proc. High Temperature Coatings III, San Diego, CA, 1999, pp. 341–50.
18. Z. Song, Z. Chunhua, W. Weitao, and W. Maocai: Acta Metall. Sinica, 2001, vol. 37, pp. 315–20.
19. H.A. Wriedt and J.L. Murray: Bull. Alloy Phase Diagrams, 1987, vol. 8 (4), p. 378.10.1007/BF02869274 ↗
20. M.W. Chase: J. NIST-JANAF Thermochemical Tables, 4th ed., American Chemical Society, Woodbury, NY, 1998.
21. C. Gerthsen, H.O. Kneser, and H. Vogel: Physik, 16th ed., Springer, Berlin, 1989, p. 200.
22. E. Metin and O.T. Inal: Metall. Trans. A, 1989, vol. 20A, pp. 1819–32.10.1007/BF02663213 ↗
23. J. Crank: The Mathematics of Diffusion, 2nd ed. Clarendon Press, Oxford, United Kingdom, 1975, pp. 61–62.
24. J.-P. Bars, E. Etchessahar, and J. Debuigne: J. Less-Common Met., 1977, vol. 52, pp. 51–76.10.1016/0022-5088(77)90234-X ↗
25. M.E. Hilley: Residual Stress Measurement by X-Ray Diffraction, SAE J784a, Society of Automotive Engineers, Warrendale, PA, 1971.
26. Y. Cao: Ph.D. Thesis, Case Western Reserve University, Cleveland, OH, 2003.
27. M.J. Donachie: Titanium: A Technical Guide, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 2000, p. 104.10.31399/asm.tb.ttg2.9781627082693 ↗