Near-net-shape forming of Al-Al3Ni functionally graded material over eutectic melting temperature
Source abstract
Abstract
A possibility to make near-net-shape functionally graded material (FGM) products has been examined. The FGM billets having a graded volume fraction of Al3Ni in thickness direction were machined from an Al-Al3Ni FGM thick-walled tube manufactured by a vacuum centrifugal method. Billets, which were set in the container for the backward extruding, were heated to 650 °C to 680 °C, at which temperature the FGM becomes a mixture of molten aluminum eutectic and solid intermetallics. Then, billets were extruded successfully to FGM cups by a semisolid forming, except at 650 °C. Residual bulky Al3Ni particles are found at higher temperature. Thus, an optimum operation temperature is found to be around 660 °C, because bulky Al3Ni particles transform to fine spheroidal or fibrous shape after the forming. The volume fraction of intermetallics at the bottom region of the cup was condensed more than 60 vol pct in a proper billet setting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. F.D. Lemkey, R.W. Hertzberg, and J.A. Ford: Trans. AIME, 1965, vol. 233, pp. 334–41.
2. J.Y. Uan, L.H. Chen, and T.S. Lui: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 401–09.10.1007/s11661-997-0141-3 ↗
3. Y. Fukui: JSME Int. J., 1991, Ser. III, vol. 34, pp. 144–48.
4. Y. Fukui, K. Takashima, and C.B. Ponton: J. Mater. Sci., 1994, vol. 29, pp. 2281–88.10.1007/BF00363415 ↗
5. Y. Fukui, H. Kinoshita, and K. Nakanishi: JSME Int. J., 1992, Ser. I, vol. 35, pp. 95–101.
6. Y. Fukui and Y. Watanabe: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 4145–51.10.1007/BF02595662 ↗
7. Y. Fukui, M. Shimojo, and P. Bowen: Proc. 3rd Int. Conf. on Composite Engineering, D. Hui, ed., International Community for Composites Engineering, New Orleans, LA, 1996, pp. 285–86.
8. ASM Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1988, vol. 15, pp. 327–38.
9. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957–81.10.1007/BF02661090 ↗
10. J.-J.A. Cheng, D. Apelian, and R.D. Doherty: Metall. Trans. A, 1986, vol. 17A, pp. 2049–62.10.1007/BF02645002 ↗
11. P.J. Ward, H.V. Atkinson, P.R.G. Anderson, L.G. Elias, B. Garcia, L. Kahlen, and J.-M. Rodriguez-Ibabe: Acta Mater., 1996, vol. 44, pp. 1717–27.10.1016/1359-6454(95)00356-8 ↗
12. R. Kopp, D. Neudenberger, M. Wimmer, and G. Winning: Proc. 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Golden, CO, K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Earth Science Resource Center at the Colorado School of Mines, Golden, CO, 1998, pp. 165–72.
13. ASM Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1988, vol. 15, pp. 114–25.
14. S.A. Metz and M.C. Flemings: Trans. Am. Foundrymen’s Soc., 1970, vol. 78, pp. 453–60.
15. D.B. Spencer, R. Mehrabian, and M.C. Flemings: Metall. Trans. A, 1972, vol. 3, pp. 1925–32.10.1007/BF02642580 ↗
16. V. Laxmanan and M.C. Flemings: Metall. Trans. A, 1980, vol. 11A, pp. 1927–37.10.1007/BF02655112 ↗
17. P. Kumar, C.L. Martin, and S. Brown: Acta Metall. Mater., 1994, vol. 42, pp. 3595–3602.10.1016/0956-7151(94)90426-X ↗