Mechanical and physical properties of high-velocity oxy-fuel-sprayed iron aluminide coatings
Source abstract
Abstract
Tensile tests and thermal-expansion measurements were performed on free-standing, high-velocity oxy-fuel (HVOF)-sprayed Fe3Al coatings produced at spray-particle velocities of 390, 560, and 620 m/s. To examine the relationship between properties and spray conditions, the microstructures of the coatings were characterized in terms of the fractions of unmelted particles, porosity, and oxide inclusions, as well as the dislocation density assessed by X-ray diffraction (XRD) line-broadening analysis. Residual coating stresses were determined as a function of coating thickness using curvature measurements. The tensile behavior was entirely brittle at room temperature; fracture strengths increased with spray-particle velocity; and the increase in fracture-strength results from decreasing fractions of microstructural defects and better interparticle bonding. The mean thermal-expansion coefficients for the coatings were lower than those for an equivalent wrought material; the differences were attributed to a 7 to 15 vol pct fraction of oxide inclusions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. N.S. Stoloff: Mater. Sci. Eng. A, 1998, vol. A258, pp. 1–14.10.1016/S0921-5093(98)00909-5 ↗
2. T.C. Totemeier, R.N. Wright, and W.D. Swank: J. Thermal Spray Technol., 2002, vol. 11, pp. 400–8.10.1361/105996302770348808 ↗
3. W.D. Swank, J.R. Fincke, D.C. Haggard, and G. Irons: in Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 307–12.
4. W.D. Swank, J.R. Fincke, D.C. Haggard, G. Irons, and R. Bullock: in Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 319–24.
5. S. Kuroda, Y. Tashiro, H. Yumoto, S. Taira, H. Fukanuma, and S. Tobe: J. Thermal Spray Technol., 2001, vol. 10, pp. 367–74.10.1361/105996301770349457 ↗
6. T.W. Clyne and S.C. Gill: J. Thermal Spray Technol., 1996, vol. 5, pp. 401–18.10.1007/BF02645271 ↗
7. C.H. Hsueh and A.G. Evans: J. Am. Ceram. Soc., 1985, vol. 68, pp. 241–48.10.1111/j.1151-2916.1985.tb15316.x ↗
8. W.D. Swank, R.A. Gavalya, J.K. Wright, and R.N. Wright: in Thermal Spray: Surface Engineering via Applied Research, C.C. Berndt, ed., ASM INTERNATIONAL, Materials Park, OH, 2000, pp. 363–69.
9. B.E. Warren: Progr. Met. Phys., 1959, vol. 8, p. 147.10.1016/0502-8205(59)90015-2 ↗
10. G.K. Williamson and R.E. Smallman: Phil. Mag., 1956, vol. 1, p. 34.10.1080/14786435608238074 ↗
11. J.H. Schneibel: in Processing, Properties, and Applications of Iron Aluminides, J.H. Schneibel and M.A. Crimp, eds., TMS, Warrendale, PA, 1994, pp. 329–42.
12. S.C. Gill and T.W. Clyne: Metall. Trans. B, 1990, vol. 21B, pp. 377–85.10.1007/BF02664205 ↗
13. C.G. McKamey, J.H. De Van McKamey, P.F. Tortorelli, and V.K. Sikka: J. Mater. Res., 1991, vol. 6, pp. 1779–1805.10.1557/JMR.1991.1779 ↗
14. A.R. Yavari, D. Negri, E. Navarro, A. Deriu, A. Hernando, and W.J. Botta: J. Metastable Nanocrystalline Mater., 1999, vols. 2–6, pp. 229–36.10.4028/www.scientific.net/JMNM.2-6.229 ↗
15. I. Baker and P.R. Munroe: Int. Mater. Rev., 1997, vol. 42, pp. 181–205.10.1179/imr.1997.42.5.181 ↗
16. U. Prakash, R.A. Buckley, H. Jones, and C.M. Sellars: Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 1113–26.10.2355/isijinternational.31.1113 ↗
17. W.D. Kingery, H.K. Bowen, and D.R. Uhlmann: Introduction to Ceramics, 2nd ed., Wiley Interscience, New York, NY, 1976, p. 593.