journal article·2009-05

Correcting the Stress-Strain Curve in the Stroke-Rate Controlling Forging Process

Y. P. Li, H. Matsumoto, A. Chiba

Publisher page

Abstract

In this article, a detailed description of the friction correction, adiabatic correction, and the correction from the stroke-rate controlling process into the strain-rate controlling process on the IHS38MSV hypoeutectoid steel is provided. By using compensated data, processing maps were plotted and used to predict the optimum hot forging process. The compressive tests were performed at stroke rates ranging from 0.12 to 120 mm/s and temperatures ranging from 800 °C to 1200 °C by using ThermecMaster-Z equipment. The results showed that the correction by instant friction coefficient, which was carried out on the basis of previous research, could be extended to wider experimental conditions. The corrected data from both stroke-rate controlling and strain-rate controlling processes were in good agreement with each other, indicating that the present correction from the stroke rate into the strain-rate correction is practical and appropriate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. J.C. Malas III, W.G. Frazier, S. Venugopal, and E.A. Medina: Metall. Mater. Trans. A, 1997, vol. 28 A, pp. 1921–30.10.1007/s11661-997-0122-6 ↗
2. J.J. Jonas, C.M. Sellars, and W.J. McG. Tegart: Metall. Rev., 1969, vol. 14, pp. 1–24.10.1179/095066069790138056 ↗
3. Y.V.R.K. Prasad: Indian J. Technol., 1990, vol. 28, pp. 435–51.
4. V.V. Kutumba Rao, and T. Rajagopalachary: Bull. Mater. Sci., 1996, vol. 19, pp. 677–98.10.1007/BF02745160 ↗
5. R. Raj: Metall. Trans. A, 1981, vol. 12A, pp. 1089–97.10.1007/BF02643490 ↗
6. Z. Gao, and R.V. Grandhi: Int. J. Mach. Tools Manuf., 2000, vol. 40, pp. 691–710.10.1016/S0890-6955(99)00083-8 ↗
7. H. Monajati, M. Jahazi, R. Bahrami, and S. Yue: Mater. Sci. Eng. A, 2004, vol. 373A, pp. 286–93.10.1016/j.msea.2004.01.027 ↗
8. L. Briottet, J.J. Jonas, and F. Montheillet: Acta Mater., 1996, vol. 44, pp. 1665–72.10.1016/1359-6454(95)00257-X ↗
9. N. Bay: J. Mech. Work. Technol., 1987, vol. 14, pp. 203–23.10.1016/0378-3804(87)90061-1 ↗
10. Y.V.R.K. Prasad, and T. Seshacharyulu: Int. Mater. Rev., 1998, vol. 43, pp. 243–58.10.1179/imr.1998.43.6.243 ↗
11. H.J. McQueen, and N.D. Ryan: Mater. Sci. Eng. A, 2002, vol. A322, pp. 43–63.10.1016/S0921-5093(01)01117-0 ↗
12. Y.P. Li, H. Matsumoto, and A. Chiba: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 982–90, DOI 10.1007/s11661-009-9783-710.1007/s11661-009-9783-7 ↗
13. H. Monajati, M. Jahazi, S. Yue, and A.K. Taheri: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 895–905.10.1007/s11661-005-0284-z ↗
14. R. Ebrahimi, and A. Najafizadeh: J. Mater. Proc. Technol., 2004, vol. 52, pp. 136–43.10.1016/j.jmatprotec.2004.03.029 ↗
15. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, and J.T. Morgan: Metall. Trans. A, 1984, vol. 15A, pp. 1883–92.10.1007/BF02664902 ↗
16. A.K. Koul, and J.P. Immarigeon: Acta Metall., 1987, vol. 35, pp. 1791–1805.10.1016/0001-6160(87)90125-8 ↗
17. H. Ziegler: Progress in Solid Mechanics, Wiley, New York, NY, 1965, vol. 4, pp. 91–193.
18. Y.P. Li, H. Matsumoto, and A. Chiba: unpublished research, 2009.
19. M. Kiuchi, and S. Shintani: Technology of Plasticity, Kogyo Chosakai Publishing, Inc., Tokyo, 2005, pp. 27–29.