Significance of the small crack growth law and its practical application
Source abstract
Abstract
The effects of microstructure and specimen size on the fatigue crack growth rate of an annealed 0.42 C steel were investigated under uniaxial fatigue loading in air. Although a dramatic fluctuation of crack growth rate was found in the propagation process of microstructurally small cracks, the mean value of crack growth rate can be evaluated by a simple mechanical parameter, σanl (l, crack length; n, constant), under high stress levels where small-scale yielding conditions are exceeded. This parameter is also effective for cracks larger than 1 to 2 mm under high stress levels, as long as the finite boundary effect of a specimen on the driving force of crack propagation is considered. The crack growth rate of the alloy was described as a function of stress amplitude and crack length in terms of two mechanical parameters, σanl and ΔK. The applicable conditions of the two parameters were discussed and manifested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. N.E. Dowling: ASTM STP, 1977, vol. 637, pp. 97–121.
2. K. Tanaka, T. Hoshide, and O. Maekawa: Eng. Fract. Mech., 1982, vol. 16, pp. 207–20.10.1016/0013-7944(82)90150-3 ↗
3. H. Kitagawa and S. Takahashi: ASTM STP, 1979, vol. 675, pp. 420–49.
4. H. Nisitani: Mech. Fatigue, ASME AMD, 1981, vol. 47, pp. 151–66.
5. H. Nisitani and N. Kawagoishi: Trans. Jpn. Soc. Mech. Eng. A, 1983, vol. 49A, pp. 431–40 (in Japanese).10.1299/kikaia.49.431 ↗
6. H. Nisitani, M. Goto, and N. Kawagoishi: Eng. Fract. Mech., 1992, vol. 41, pp. 499–513.10.1016/0013-7944(92)90297-R ↗
7. W.L. Morris: Metall. Trans. A, 1980, vol. 11A, pp. 1117–23.10.1007/BF02668135 ↗
8. D. Taylor and J.F. Knott: Fatigue Fract. Eng. Mater. Struct., 1981, vol. 4, pp. 147–55.10.1111/j.1460-2695.1981.tb01116.x ↗
9. J. Lankford: Fatigue Fract. Eng. Mater. Struct., 1982, 5, pp. 233–48.10.1111/j.1460-2695.1982.tb01251.x ↗
10. I.S. Raju and J.C. Newman, Jr.: Eng. Fract. Mech., 1979, vol. 11, pp. 817–29.10.1016/0013-7944(79)90139-5 ↗
11. H.W. Liu: J. Basic Eng., ASME, 1963, vol. 85, pp. 116–22.10.1115/1.3656501 ↗
12. H. Nisitani and N. Kawagoishi: Trans. Jpn. Soc. Mech. Eng. A, 1985, vol. 51A, pp. 1668–76 (in Japanese).10.1299/kikaia.51.1668 ↗
13. D.S. Dugdale: J. Mech. Phys. Solids, 1960, vol. 8, pp. 100–08.10.1016/0022-5096(60)90013-2 ↗
14. H. Nisitani, Y. Oda, and T. Yakushiji: JSME Int. Ser. I, 1990, vol. 331, pp. 243–48.
15. H. Nisitani and K. Takao: Eng. Fract. Mech., 1974, vol. 6, pp. 253–60.10.1016/0013-7944(74)90023-X ↗
16. H. Nisitani and K. Takao: Eng. Fract. Mech., 1981, vol. 15, pp. 445–56.10.1016/0013-7944(81)90070-9 ↗
17. K.J. Miller: Fatigue Fract. Eng. Mater. Struct., 1987, vol. 10, pp. 75–91.10.1111/j.1460-2695.1987.tb01150.x ↗
18. M. Goto: Fatigue Fract. Eng. Mater. Struct., 1994, vol. 17, pp. 635–49.10.1111/j.1460-2695.1994.tb00262.x ↗
19. E. Tokaji, T. Ogawa, and Y. Harada: J. Soc. Mater. Sci. Jpn., 1986, vol. 35, pp. 394–400 (in Japanese).10.2472/jsms.35.394 ↗
20. N. Kawagoishi, H. Nisitani, T. Toyohiro, N. Yamamoto, and T. Tsuno: Trans. Jpn. Soc. Mech. Eng. A, 1994, vol. 60A, pp. 358–63 (in Japa-nese).10.1299/kikaia.60.358 ↗
21. N. Kawagoishi, H. Nisitani, and T. Toyohiro: JSME Int. J. Ser. I, 1992, vol. 351, pp. 1–11.
22. H. Kitagawa and S. Takahasi: Trans. Jpn. Soc. Mech. Eng. A, 1979, vol. 45A, pp. 1289–1303 (in Japanese).10.1299/kikaia.45.1289 ↗
23. Y. Murakami and K. Mathuda: Trans. Jpn. Soc. Mech. Eng. A, 1986, vol. 52A, pp. 1492–99 (in Japanese).10.1299/kikaia.52.1492 ↗
24. M.W. Brown: in The Behavior of Short Fatigue Cracks, European Group on Fracture Publication No. 1, K.J. Miller and E.R. De los Rios, eds., Mechanical Engineering Publications, London, 1986, pp. 423–39.