journal article·2003-11

A planar simple shear test and flow behavior in a superplastic Al-Mg alloy

D. H. Bae, A. K. Ghosh

Publisher page

Abstract

Superplasticity is generally studied by performing tensile and gas-pressure-bulge tests. In formed parts, however, a variety of strain states, including in-plane shear, are encountered. The understanding of the mechanical response in shear is helpful in the study of superplastic metal forming. In this study, a device for a planar simple shear test was designed and used to perform tests on a superplastic Al-Mg alloy sheet at the elevated temperatures of 500 °C (773K) and 550 °C (823K). In such a test, the incremental rotation of the principal strain axes and specimen-end effects during deformation can complicate the determination of true mechanical response. The possible approximations regarding the strain state in the specimen gage have been investigated. The σ e -e e curves developed based on a simple-shear assumption show a lower flow stress than that under uniaxial tension, and strain hardening is related to dynamic grain growth. The rate of strain hardening at a fixed % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfKttLearuqr1ngBPrgarmWu51MyVXgatC% vAUfeBSjuyZL2yd9gzLbvyNv2CaeHbd9wDYLwzYbItLDharyavP1wz% ZbItLDhis9wBH5garqqtubsr4rNCHbGeaGqiVu0Je9sqqrpepC0xbb% L8F4rqqrFfpeea0xe9Lq-Jc9vqaqpepm0xbba9pwe9Q8fs0-yqaqpe% pae9pg0FirpepeKkFr0xfr-xfr-xb9adbaqaaeGaciGaaiaabeqaam% aaeaqbaaGcbaGafqyTduMbaiaaaaa!3C7B! $$\dot \varepsilon $$ e level is essentially the same for both uniaxial tension and shear, but the difference in the effective stress between uniaxial tension and shear depends upon strain rate and temperature. This study marks the first known attempt to characterize large strain response for superplastic metals under conditions of simple shear.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. ASM Handbook, vol. 8, Mechanical Testing, 5th ed., ASM INTERNATIONAL, Metals Park, OH, 1995, p. 62.
2. C. G’sell and J.J. Jonas: J. Mater. Sci., 1979, vol. 14, p. 583.10.1007/BF00772717 ↗
3. P.S. Hope, I.M. Ward, and A.G. Gibson: J. Mater. Sci., 1980, vol. 15, p. 2207.10.1007/BF00552308 ↗
4. C. G’sell, S. Boni, and S. Shrivastava: J. Mater. Sci., 1983, vol. 18, p. 903.10.1007/BF00745590 ↗
5. E.F. Rauch: Solid State Phenomena, 1992, vols. 23–24, p. 317.10.4028/www.scientific.net/SSP.23-24.317 ↗
6. C. Tome, G.R. Canova, U.F. Kocks, N. Christodoulou, and J.J. Jonas: Acta Metall., 1984, vol. 32, p. 1637.10.1016/0001-6160(84)90222-0 ↗
7. R. Hill: Proc. R. Soc. London, 1948, vol. A193, p. 281.
8. S.S. Hecker: Metall. Trans., 1971, vol. 2, pp. 2077–86.10.1007/BF02917534 ↗
9. A.K. Ghosh and W.A. Backofen: Metall. Trans., 1973, vol. 4, pp. 1113–23.10.1007/BF02645615 ↗
10. M.J. Mayo and W.D. Nix: Acta Metall., 1989, vol. 37, p. 1121.10.1016/0001-6160(89)90108-9 ↗
11. L.G. Schultz: J. Appl. Phys., 1949, vol. 20, p. 1031.
12. C.M. Packer, R.H. Johnson, and O.D. Sherby: Trans. AIME, 1968, vol. 242, p. 2485.
13. G.L. Dunlop, J.D. Reid, and D.M.R. Taplin: Metall. Trans., 1971, vol. 2, pp. 2308–10.10.1007/BF02917577 ↗
14. R.B. Vastava and T.G. Langdon: Acta Metall., 1979, vol. 27, p. 251.10.1016/0001-6160(79)90103-2 ↗
15. B.Y. Chirouze, D.M. Schwartz, and J.E. Dorn: Trans. ASM, 1967, vol. 60, p. 51.
16. K. Linga Murty, F.A. Mohamed, and J.E. Dorn: Acta Metall., 1972, vol. 20, p. 1009.10.1016/0001-6160(72)90135-6 ↗
17. S.-A. Shei and T.G. Langdon: Acta Metall., 1978, vol. 26, p. 639.10.1016/0001-6160(78)90116-5 ↗
18. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, p. 993.10.1016/S1359-6454(01)00399-8 ↗
19. D.H. Bae and A.K. Ghosh: Acta Mater., 2000, vol. 48, p. 1207.10.1016/S1359-6454(99)00445-0 ↗
20. F. Li, D.H. Bae, and A.K. Ghosh: Acta Mater., 1997, vol. 45, p. 3887.10.1016/S1359-6454(97)00032-3 ↗
21. D.H. Bae, A.K. Ghosh, and J.R. Bradley: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2449–63.10.1007/s11661-003-0005-4 ↗
22. J. Pilling and N. Ridley: Acta Metall., 1986, vol. 34, p. 669.10.1016/0001-6160(86)90182-3 ↗
23. C.C. Bampton and R. Raj: Acta Metall., 1982, vol. 30, p. 2043.10.1016/0001-6160(82)90107-9 ↗
24. C.C. Bampton, M.W. Mahoney, C.H. Hamilton, A.K. Ghosh, and R. Raj: Metall. Trans. A, 1983, vol. 14A, pp. 1583–91.10.1007/BF02654385 ↗