journal article·2005-08

Correlating the microstructure of the die-chill skin and the corrosion properties for a hot-chamber die-cast AZ91D magnesium alloy

Bing-Lung Yu, Jun-Yen Uan

Publisher page

Abstract

The corrosion of a hot-chamber die-cast AZ91D thin plate (1.4 mm in thickness) was investigated in terms of its microstructure, to elucidate the role of die-chill skin in corrosion. The die-chill skin was composed of a thin layer of chill zone and a thick layer of an interdendritic Al-rich α-Mg/Al12Mg17 β-phase particle/α-Mg grain composite microstructures. The chill zone (4±1 µm in thickness) had fine columnar and equiaxed grains and contained a distribution of submicron Mg-Al-Zn intermetallic particles. Beneath the chill zone, Al12Mg17 β particles were irregularly shaped but did not have an interdendritic network morphology. Furthermore, Al-rich α phase (also known as eutectic α) was in the interdendritic network, which occupied a higher volume fraction than the β phase in the die-skin layer. Corrosion characteristics were studied via constant-immersion and electrochemical tests. Although previous studies have ascribed the fine microstructure to good corrosion resistance for the AZ91D alloy, the present study showed severe corrosion of the sample with a die skin in chloride solution. Moreover, the sample without the die skin on the surface corroded more slowly. The inferior corrosion performance of the die skin was considered to be related to the high volume fraction of the interdendritic network of Al-rich α phase contained in the die skin, owing to the high cooling rate during solidification. The Al-rich α phase does not increase the corrosion resistance of the AZ91D alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. J.E. Gray and B. Luan: J. Alloys Compounds, 2002, vol. 336, pp. 88–113.10.1016/S0925-8388(01)01899-0 ↗
2. G. Ballerini, U. Bardi, A. Lavacchi, D. Migliorini, B. Daniele, R. Bignucolo, and G. Ceraolo: Magnesium Industry, 2002, vol. 3, pp. 16–20.
3. D. Eliezer and E. Aghion: LiMAT-2001, Proc. Int. Conf. on Light Materials for Transportation Systems, N. Kim, C.S. Lee, and D. Eylon, eds., Pusan, Republic of Korea, 2001, pp. 175-83.
4. D.A. Jones: Principles and Prevention of Corrosion, 2nd ed., Prentice-Hall, Englewood Cliffs, NJ, 1996, pp. 40–74.
5. M. Avedesian and H. Baker: Magnesium and Magnesium Alloys, ASM Specialty Handbook, ASM, Metals Park, OH, 1999, pp. 1–51.
6. I. Nakatsugawa, H. Takayasu, and K. Saito: Magnesium Alloys and Their Applications, K.U. Kainer, ed., International Congress of Magnesium Alloys and Their Applications, Munich, 2000, Wiley-Veh, Federal Republic of Germany, pp. 445–50.10.1002/3527607552.ch71 ↗
7. I. Nakatsugawa, F. Yamada, H. Takayasu, T. Tsukeda, and K. Saito: Proc. Int. Symp. on Environmental Degradation of Materials and Corrosion Control in Metals, PQ, Canada, 1999, Canadian Institute of Mining, Metallurgy, and Petroleum, Quebec, pp. 113–23.
8. S. Sannes and H. Westengen: Magnesium Alloys and Their Applications, Int. Congr. of Magnesium Alloys and Their Applications, Wolfsburg, Germany, 1998, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationegesellschaft MBH, Hamburger, pp. 223–28.
9. R. Galun, A. Weisheit, and B.L. Mordike: Corr. Rev., 1998, vol. 16, pp. 53–73.10.1515/CORRREV.1998.16.1-2.53 ↗
10. N.A. El-Mahallawy, M.A. Taha, E. Pokora, and F. Klein: J. Mater. Processing Technol., 1998, vol. 73, pp. 125–38.10.1016/S0924-0136(97)00221-5 ↗
11. W.P. Sequeira, G.L. Dunlop, and M.T. Murray: Proc. 3rd Int. Magnesium Conf., G.W. Lorimer, ed., Manchester, United Kingdom, 1997, pp. 63–73.
12. G. Song, A. Atrens, and M. Dargusch: Corr. Sci., 1999, vol. 41, pp. 249–73.10.1016/S0010-938X(98)00121-8 ↗
13. G. Song, A. Atrens, X. Wu, and B. Zhang: Corr. Sci., 1998, vol. 40, pp. 1769–91.10.1016/S0010-938X(98)00078-X ↗
14. R. Ambat, N. Naing, and W. Zhou: Corr. Sci., 2000, vol. 42, pp. 1433–55.10.1016/S0010-938X(99)00143-2 ↗
15. N. Pebere, C. Riera, and F. Dabosi: Electrochem. Acta, 1990, vol. 35, pp. 555–61.10.1016/0013-4686(90)87043-2 ↗
16. J. H. Nordlien, S. Ono, N. Masuko, and K. Nisancioglu: Corr. Sci., 1997, vol. 39, pp. 1397–1414.10.1016/S0010-938X(97)00037-1 ↗
17. O. Lunder, M. Videm, and K. Nisancioglu: Soc. Automotive Eng. (Spec. Publ.), 1995, SP-1096, pp. 57–62.
18. O. Lunder, J.H. Nordlien, and K. Nisancioglu: Corr. Rev., 1997, vol. 15, pp. 439–69.10.1515/CORRREV.1997.15.3-4.439 ↗
19. M. Videm, J.I. Skar, and P. Bakke: Magnesium Alloys and Their Applications, Int. Congr. of Magnesium Alloys and Their Applications, Munich, 2000, K.U. Kainer, ed., Wiley-Veh, Federal Republic of Germany, pp. 432–38.10.1002/3527607552.ch69 ↗
20. R.K. Marcus: Glow Discharge Spectroscopies, Plenum Press, New York, NY, 1993, pp. 113–74.10.1007/978-1-4899-2394-3 ↗
21. G.F. Vander Voort: Metallography Principles and Practice, McGraw-Hill, New York, NY, 1984, p. 426.10.31399/asm.tb.mpp.9781627082600 ↗
22. J.W. Liou, T.S. Lui, and L.H. Chen: Wear, 1997, vol. 211, pp. 169–76.10.1016/S0043-1648(97)00105-1 ↗
23. O. Lunder, J.E. Lein, T.K. Aune, and K. Nisancioglu: Corrosion, 1989, vol. 45, pp. 741–48.10.5006/1.3585029 ↗
24. Y.B. Unigovski and E.M. Gutman: Appl. Surf. Sci., 1999, vol. 153, pp. 47–52.10.1016/S0169-4332(99)00337-2 ↗
25. G. Song, A. Atrens, D. St. John, and L. Zheng: Magnesium Alloys and Their Applications, Int. Congr. Magnesium Alloys and Their Applications, Munich, 2000, K.U. Kainer, ed., Wiley-Veh, Federal Republic of Germany, pp. 425–31.
26. G. Song and D. St. John: Int. J. Cast Met. Res., 2000, vol. 12, pp. 327–34.10.1080/13640461.2000.11819371 ↗
27. R. Ambat, N.N. Aung, and W. Zhou: J. Appl. Electrochem., 2000, vol. 30, pp. 865–74.10.1023/A:1004011916609 ↗
28. S. Mathieu, C. Rapin, J. Hazan, and P. Steinmetz: Corr. Sci., 2002, vol. 44, pp. 2737–56.10.1016/S0010-938X(02)00075-6 ↗
29. R.K. Singh Raman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2525–31.10.1007/s11661-006-0233-5 ↗
30. S. Mathieu, C. Rapin, J. Steinmetz, and P. Steinmetz: Corr. Sci., 2003, vol. 45, pp. 2741–55.10.1016/S0010-938X(03)00109-4 ↗
31. M.R. Bothwell: The Corrosion of Light Metals, H.P. Godard, ed., John Wiley & Sons, New York, NY, 1967, p. 257.
32. G.L. Maker and J. Kruger: J. Electrochem. Soc., 1990, vol. 137, pp. 414–21.10.1149/1.2086455 ↗