journal article·2000-01

Characterization of Mo-SiO2 functionally graded materials

H. Ishibashi, H. Tobimatsu, K. Hayashi, T. Matsumoto, A. P. Tomsia, E. Saiz

Publisher page

Abstract

Mo/SiO2 functionally graded materials (FGMs) have been prepared by combined slip casting and sedimentation techniques. The final, sintered samples have a gradient in molybdenum content, with a maximum value of ∼20 to 25 vol pct Mo. At one edge, the FGM is a good electrical conductor (for approximately one-third of the total length), while the opposite end is composed mainly of fused SiO2. The variation of electrical resistivity, hardness, toughness, and thermal expansion along the gradient has been analyzed. The FGMs sintered in vacuum contained a small amount of Mo oxide (∼2 wt pct) as a third phase. The oxide originated from the starting Mo powders and oxidation during presintering. The oxide was in the form of discrete particles and did not appreciably affect the measured properties. The Mo content had the expected effect on the FGM properties; an increase in Mo increases resistivity, thermal expansion, and toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. C. Goetzel: in Cermets, J.R. Tinklepaugh and W.B. Crandall, eds., Reinh Publishing Corporation, New York, NY, 1960, pp. 130–45.
2. J.N. Weber and E.W. White: Mater. Res. Bull., 1972, vol. 7, pp. 1005–16.10.1016/0025-5408(72)90092-X ↗
3. J.S. Moya, A.J. Sanchez-Herencia, J. Requena, and R. Moreno: Mater. Lett., 1992, vol. 14, pp, 333–35.10.1016/0167-577X(92)90048-O ↗
4. MRS Bull., 1995, vol. 26 (1).
5. A. Mortensen and S. Suresh: Int. Mater. Rev., 1995, vol. 40, pp. 239–65.10.1179/imr.1995.40.6.239 ↗
6. S. Suresh and A. Mortensen: Int. Mater. Rev., 1997, vol. 42, pp. 85–116.10.1179/imr.1997.42.3.85 ↗
7. A.J. Markworth, K.S. Ramesh, and W.P. Parks: J. Mater. Sci., 1995, vol. 30, pp. 2183–93.10.1007/BF01184560 ↗
8. Metals Reference Book, 5th ed., C.J. Smithells, ed., Butterworth and Co., London, 1976, pp. 940–43.
9. Handbook of Chemistry and Physics, 66th ed., R.C. Weast, ed., CRC Press Inc., Boca Raton, FL, 1985, p. F-56.
10. Corrosion 1. Metal/Environment Reactions, 2nd ed., L.L. Shreir, ed., Butterworth and Co., Boston, MA, 1978, p. 5:15.
11. J. Chu, H. Ishibashi, K. Hayashi, H. Takebe, and K. Morinaga: J. Ceram. Soc. Jpn., 1993, vol. 101, pp. 841–44.10.2109/jcersj.101.841 ↗
12. W.K. Wal: J. Mol. Struct., 1984, vol. 115, pp. 59–62.10.1016/0022-2860(84)80014-9 ↗
13. HSC Chemistry for Windows, Version 1.10, Okotumpu Research, Pori, Finland, 1993.
14. J.M. Coddington and M.J. Taylor: J. Chem. Soc. Dalton Trans., 1990, pp. 41–47.
15. A.P. Tomsia, E. Saiz, H. Ishibashi, M. Diaz, J. Requena, and J.S. Moya: J. Eur. Ceram. Soc., 1998, vol. 18, pp. 1365–71.10.1016/S0955-2219(98)00066-1 ↗
16. D.S. McLachlan, M. Blaszkiewicz, and R.E. Newnham: J. Am. Ceram. Soc., 1990, vol 73, pp. 2187–2203.10.1111/j.1151-2916.1990.tb07576.x ↗
17. B.R. Lawn: Fracture of Brittle Solids, Cambridge University Press, Cambridge, United Kingdom, 1993, p. 292.10.1017/CBO9780511623127 ↗
18. Metals Reference Book, 5th ed., C.J. Smithells, ed., Butterworth and Co., London, 1976, pp. 1257.
19. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533–38.10.1111/j.1151-2916.1981.tb10320.x ↗
20. B.R. Lawn: Fracture of Brittle Solids, Cambridge University Press, Cambridge, United Kingdom, 1993, p. 272.10.1017/CBO9780511623127 ↗
21. W.D. Kingery, H.K. Bowen, and D.R. Uhlmann: Introduction to Ceramics, 2nd ed., John Wiley & Sons, New York, NY, 1976, pp. 603–06.
22. A.P. Tomsia, R.M. Cannon, J.M. McNaney, H. Ishibashi, E. Saiz, W. Moberly-Chan, T.J. Becker, and R.O. Ritchie: LBNL-40886, Lawrence Berkeley Laboratory Reports, University of California, Berkeley, CA, Sept. 1997.