journal article·2006-07

Effect of conventional and microwave sintering on the properties of yttria alumina garnet-dispersed austenitic stainless steel

S. S. Panda, A. Upadhyaya, D. Agrawal

Publisher page

Abstract

The current study examines the effect of heating mode, temperature, and varying yttria alumina garnet (YAG) addition (5 and 10 wt pct) on the densification and properties of austenitic (316L) stainless steel. The straight 316L stainless steel and 316L-YAG composites were heated in a radiatively heated (conventional) and 2.45 GHz microwave sintering furnace. The compacts were consolidated through solid state as well as supersolidus sintering at 1200 °C and 1400 °C, respectively. Both 316L and 316L-YAG compacts couple with microwaves and heat to the sintering temperature rapidly (∼45 °C/min). The overall processing time was reduced by about 90 pct through microwave sintering. As compared to conventional sintering, compacts sintered in microwaves exhibit higher densification and finer microstructure but no corresponding improvement in mechanical properties and wear resistance. This has been correlated to elongated, irregular pore structure in microwave-sintered compacts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave-Assisted Synthesis and Applications · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. R.M. German:Powder Metallurgy and Particulate Materials Processing, 3rd ed., Metal Powder Industries Federation, Princeton, NJ, 2005.
2. W.A. Kaysser and G. Petzow:Powder Metall., 1985, vol. 28 (3), pp. 145–50.10.1179/pom.1985.28.3.145 ↗
3. J. Shankar, A. Upadhyaya, and R. Balasubramaniam:Supersolidus Liquid Phase Sintering of Austenitic Stainless Steel-Yttria Composites, Metal Powder Industries Federation, Princeton, NJ, 2002, vol. 13, pp. 313–22.
4. D.H. Ro and E. Klar: inModern Developments in Powder Metallurgy, H.H. Hausner, H.W. Antes, and G.D. Smith, eds., MPIF, Princeton, NJ, 1980, vol. 13, pp. 247–87.
5. D.L. Dyke and H.D. Ambs:Powder Metallurgy Applications, Advantages and Limitations, Erhard Klar, ed., ASM, Materials Park, OH, 1983, pp. 123–44.
6. G. Lei, R.M. German, and H.S. Nayar:Powder Metall. Int., 1983, vol. 15 (2), pp. 70–76.
7. H.S. Nayar, R.M. German, and W.R. Johnson:Progress in Powder Metallurgy, MPIF, Princeton, NJ, 1981, vol. 37, pp. 255–65.
8. N.B. Shaw and R.W.K. Honeycombe:Powder Metall., 1977, vol. 20 (4), pp. 191–98.10.1179/pom.1977.20.4.191 ↗
9. R.M. German:Powder Metallurgy of Iron and Steel, John Wiley, New York, NY, 1998, pp. 373–403.
10. R.M. German:Sintering Theory and Practice, John Wiley, New York, NY, 1996, pp. 374–83.
11. R.M. German:Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1553–67.10.1007/s11661-997-0217-0 ↗
12. R.M. German:Int. J. Powder Metall., 1997, vol. 33, pp. 49–61.
13. J.A. Lund and S.R. Bala:Modern Developments in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1974, vol. 6, pp. 409–21.
14. L. Cambal and J.A. Lund:Int. J. Powder Metall., 1972, vol. 8 (3), pp. 131–40.
15. R. Tandon and R.M. German:Int. J. Powder Metall., 1997, vol. 33, pp. 54–60.
16. B.N. Singh:J. Iron Steel Inst., 1971, vol. 209 (4), pp. 306–07.
17. F. Velasco, N. Anton, J.M. Torralba, and J.M. Ruiz-Prieto:Mater. Sci. Technol., 1997, vol. 13, pp. 847–51.10.1179/mst.1997.13.10.847 ↗
18. J. Jain, A.M. Kar, and A. Upadhyaya:Mater. Lett., 2004, vol. 58, pp. 2037–40.10.1016/j.matlet.2003.12.022 ↗
19. J. Shankar, A. Upadhyaya, and R. Balasubramaniam:Corros. Sci., 2004, vol. 46, pp. 487–98.10.1016/S0010-938X(03)00144-6 ↗
20. S.N. Patankar and M.J. Tan:Powder Metall., 2000, vol. 43, pp. 350–52.10.1179/003258900666078 ↗
21. K.J. Rao and P.D. Ramesh:Bull. Mater. Sci., 1995, vol. 18, pp. 447–65.10.1007/BF02749773 ↗
22. D.E. Clark and W.H. Sutton:Ann. Rev. Mater. Sci., 1996, vol. 26, pp. 299–331.10.1146/annurev.matsci.26.1.299 ↗
23. W.H. Sutton:Ceram. Bull., 1989, vol. 68 (2), pp. 376–84.
24. D.M. Pozar:Microwave Engineering, 2nd ed., John Wiley, Toronto, 2001.
25. D.K. Agrawal, J. Cheng, A. Lackner, and W. Ferstl:Proc. Eur. Conf. on Advances in Hard Materials Production EURO PM 99, EPMA, Shrewsbury, United Kingdom, pp. 175–82.
26. T. Gerdes, M. Willert-Porada, and K. Rödiger:Mater. Res. Soc. Symp. Proc., 1996, vol. 430, pp. 45–50.10.1557/PROC-430-45 ↗
27. T. Gerdes, M. Willert-Porada, K. Rödiger, and K. Dreyer:Mater. Res. Soc. Symp. Proc., 1996, vol. 430, pp. 175–80.10.1557/PROC-430-175 ↗
28. R. Roy, D.K. Agrawal, J.P. Cheng, and S. Gedevanishvili:Nature, 1999, vol. 399, pp. 668–70.10.1038/21390 ↗
29. M.J. Yang and R.M. German:Advances in Powder Metallurgy and Particulate Materials, MPIF, Princeton, NJ, 1999, vol. 1 (3), pp. 117–24.
30. M. Willert-Porada and H.S. Park: inMicrowaves: Theory and Application in Materials Processing V, D.E. Clark, J.G.P. Binner, and D.A. Lewis, eds., The American Ceramic Society, Westerville, OH, 2001, pp. 459–70.
31. R.M. Anklekar, D.K. Agrawal, and R. Roy:Powder Metall., 2001, vol. 44, pp. 355–62.10.1179/003258901666536 ↗
32. G. Sethi, A. Upadhyaya, and D. Agrawal:Sci. Sintering, 2003, vol. 35, pp. 49–65.10.2298/SOS0302049S ↗
33. N. Agarwal, G. Sethi, A. Upadhyaya, D. Agarwal, and R. Roy:Trans. PMAI, 2003, vol. 29, pp. 61–65.
34. K. Saitou:Scripta Mater., 2006, vol. 54, pp. 875–79.10.1016/j.scriptamat.2005.11.006 ↗
35. M. Willert-Porada: inMicrowaves: Theory and Application in Materials Processing IV, D.E. Clark, W.H. Sutton, and D.A. Lewis, eds., The American Ceramic Society, Westerville, OH, 1997, pp. 153–64.
36. “MPIF Standard 10: Tension Test Specimens for Pressed and Sintered Metal Powders,” Standard Test Methods for Metal Powders and Powder Metallurgy Products, Metal Powder Industries Federation, Princeton, NJ, 1991.
37. R. Tandon: Ph.D. Thesis, The Pennsylvania State University, University Park, PA, 1995.
38. E. Pert, Y. Carmel, A. Birnboim, T. Olorunyolemi, D. Gershon, J. Calame, I.K. Lloyd, O.C. Wilson, Jr.:J. Am. Ceram. Soc., 2001, vol. 84 (9), pp. 1981–86.10.1111/j.1151-2916.2001.tb00946.x ↗
39. CRC Handbook of Chemistry and Physics, 79th ed., D.R. Lide, ed., CRC Press, Boca Raton, FL, 1998.
40. A. Nayer:The Metals Data Book, McGraw-Hill, New York, NY, 1997.
41. “LEICA QWin User Guide,” Leica Imaging System Ltd., Cambridge, United Kingdom, 1996.
42. V. Mikli, H. Kaerdi, P. Kulu, and M. Besterci:Proc. Estonian Acad. Sci. Eng., 2001, vol. 7 (1), p. 22.10.3176/eng.2001.1.03 ↗
43. R.T. Howard and M. Cohen:Trans. AIME, 1947, vol. 172, p. 413.
44. P. Mishra, G. Sethi, and A. Upadhyaya:Metall. Mater. Trans. B, 2006, vol. 37B, in press.10.1007/s11663-006-0066-z ↗
45. S.J.L. Kang:Sintering: Densification, Grain Growth and Microstructure, Elsevier Butterworth-Heinemann, London, 2005.
46. S.S. Sahay and K. Krishan:Physica B, 2004, vol. 348, pp. 310–14.10.1016/j.physb.2003.12.006 ↗
47. S.S. Sahay and K. Krishnan:Thermochim. Acta, 2005, vol. 430, pp. 23–39.10.1016/j.tca.2004.12.007 ↗
48. H. Preusse and J.D. Bolton:Powder Metall., 1999, vol. 42, pp. 51–62.10.1179/003258999665413 ↗
49. R.D. Peelamedu, R. Roy, and D. Agrawal:Mater. Res. Bull., 2001, vol. 36, pp. 2723–39.10.1016/S0025-5408(01)00743-7 ↗
50. R.M. Anklekar, K. Bauer, D.K. Agrawal, and R. Roy:Powder Metall., 2005, vol. 48, pp. 39–46.10.1179/003258905X37657 ↗
51. F.A.C. Iglesias, J.M.R. Roman, L.E.G. Cambronero, J.M.R. Prieto, E.R.M. Lopez, and F.A. Lopez:Proc. PM World Congr.: High Alloy Steel, EPMA, Shrewsbury, United Kingdom, 1998, vol. 3, pp. 471–76.
52. M. Youseffi and K.Y. Chong:Powder Metall., 2003, vol. 46, pp. 30–38.10.1179/003258903225010460 ↗
53. A. Bose, D. Agrawal, and R.J. Dowding:Advances in Pwder Metallurgy and Particulate Materials, MPIF, Princeton, NJ, 2004, vol. 1, part 4, p. 53.
54. A. Molinari, J. Kazior, F. Marchetti, R. Canteri, I. Cristofolini, and A. Tiziani:Powder Metall., 1994, vol. 37, pp. 115–22.10.1179/pom.1994.37.2.115 ↗
55. W.F. Wang and Y.L. Su:Powder Metall., 1986, vol. 29, pp. 269–75.10.1179/pom.1986.29.4.269 ↗