journal article·2000-05

An analysis of the effect of cavity nucleation rate and cavity coalescence on the tensile behavior of superplastic materials

P. D. Nicolaou, S. L. Semiatin, A. K. Ghosh

Publisher page

Abstract

A model utilizing a simple force-equilibrium approach was developed to establish the effect of the cavity nucleation rate and cavity coalescence on the uniaxial tensile behavior of superplastic metals. All cavities were assumed to be spherical and uniformly distributed within the material, irrespective of the degree of deformation. Material input parameters for the model comprised the cavity nucleation rate (N), the strain-rate sensitivity of the flow stress (m), and the growth parameter for individual cavities ({eta}), which was taken to be a function of m. The effect of cavity coalescence on average void size and volume fraction was treated using an empirical relation, which correlates an average void growth rate to the growth rate of individual, noninteracting cavities. Model predictions indicated that the macroscopic quantities often used to describe cavitation behavior, i.e., initial cavity volume fraction (C{sub v0}) and apparent cavity growth rate ({eta}{sub APP}) describe the combined influence of cavity nucleation, growth, and coalescence. With regard to the overall tensile behavior, simulation results revealed that increasing cavity nucleation rates reduce ductility in a manner analogous to the effect of decreases in the strain-rate sensitivity. In addition, the failure mode was established with regard to the relative magnitudes of themore » cavity nucleation rate and the strain-rate sensitivity. Model predictions of tensile elongation and cavity-size distributions were validated by comparison to measurements found in the literature for cavitating superplastic materials.« less
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. J. Pilling and N. Ridley: Superplasticity in Crystalline Solids, The Institute of Metals, London, 1989.
2. M.M.I. Ahmed and T.G. Langdon: Metall. Trans. A, 1977, vol. 8A, pp. 1832–33.10.1007/BF02646892 ↗
3. M.J. Stowell: in Superplastic Forming of Structural Alloys, N.E. Paton and C.H. Hamilton, eds., TMS-AIME, Warrendale, PA, 1982, pp. 321–26.
4. C.C. Bampton and J.W. Edington: J. Eng. Mater. Technol., 1983, vol. 105, pp. 55–60.10.1115/1.3225619 ↗
5. G.H. Edward and M.F. Ashby: Acta Metall., 1979, vol. 27, pp. 1505–18.10.1016/0001-6160(79)90173-1 ↗
6. A.K. Ghosh and D.H. Bae: Mater. Sci. For., 1997, vols. 243–245, pp. 89–98.
7. S. Sagat and D.M.R. Taplin: Acta Metall., 1976, vol. 24, pp. 307–15.10.1016/0001-6160(76)90005-5 ↗
8. J. Pilling and N. Ridley: in Superplasticity in Aerospace, H.C. Heikkenen and T.R. McNelley, eds., TMS, Warrendale, PA, 1988, pp. 183–97.
9. A.H. Chokshi: J. Mater. Sci., 1986, vol. 21, pp. 2073–82.10.1007/BF00547949 ↗
10. A.C.F. Cocks and M.F. Ashby: Met. Sci., 1982, vol. 16, pp. 465–78.10.1016/0036-9748(82)90413-6 ↗
11. P.D. Nicolaou and S.L. Semiatin: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3675–81.10.1007/BF02595459 ↗
12. A.H. Chokshi and T.G. Langdon: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2532–39.10.1007/BF02652347 ↗
13. J. Pilling: Mater. Sci. Technol., 1985, vol. 1, pp. 461–66.10.1179/mst.1985.1.6.461 ↗
14. P.D. Nicolaou and S.L. Semiatin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2621–30.10.1007/s11661-998-0234-7 ↗
15. M. Zaki: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1043–46.10.1007/BF02649772 ↗
16. P.A. Friedman and A.K. Ghosh: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3827–39.10.1007/BF02595632 ↗
17. K. Kannan and C.H. Hamilton: Scripta Mater., 1997, vol. 37, pp. 455–62.10.1016/S1359-6462(97)00108-5 ↗
18. J. Lian and M. Suery: Mater. Sci. Technol., 1986, vol. 2, pp. 1093–98.10.1179/mst.1986.2.11.1093 ↗
19. P.D. Nicolaou, S.L. Semiatin, and C.M. Lombard: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3112–19.10.1007/BF02663861 ↗
20. A.K. Ghosh and R.A. Ayres: Metall. Trans. A, 1976, vol. 7A, pp. 1589–91.10.1007/BF02656404 ↗
21. P.W. Bridgman: Studies in Large Plastic Flow and Fracture, McGraw-Hill, New York, NY, 1952, ch. 1.
22. J.J. Jonas and B. Baudelet: Acta Metall., 1977, vol. 25, pp. 43–50.10.1016/0001-6160(77)90244-9 ↗
23. S.L. Semiatin, A.K. Ghosh, and J.J. Jonas: Metall. Trans. A, 1985, vol. 16A, pp. 2291–98.10.1007/BF02670429 ↗
24. C.M. Lombard, A.K. Ghosh, and S.L. Semiatin: in Advances in the Science and Technology of Titanium Alloy Processing, I. Weiss, R. Srinivasan, P.J. Bania, D. Eylon, and S.L. Semiatin, eds., TMS, Warrendale, PA, 1996, pp. 161–68.
25. S.L. Semiatin, R.E. Dutton, and S. Shamasundar: in Processing and Fabrication of Advanced Materials IV, T.S. Srivatsan and J.J. Moore, eds., TMS, Warrendale, PA, 1996, pp. 39–52.
26. A.K. Ghosh: University of Michigan, Ann Arbor, MI, unpublished research, 1998.
27. D.W. Livesey and N. Ridley: Metall. Trans. A, 1982, vol. 13A, pp. 1619–26.10.1007/BF02644802 ↗
28. J. Pilling and N. Ridley: Acta Metall., 1986, vol. 34, pp. 669–79.10.1016/0001-6160(86)90182-3 ↗
29. C.M. Lombard: Wright Laboratory Materials Directorate, Wright-Patterson Air Force Base, OH, unpublished research, 1996.
30. M.I. Ahmed, F.A. Mohamed, and T.G. Langdon: J. Mater. Sci., 1979, vol. 14, pp. 2913–1810.1007/BF00611474 ↗
31. C.H. Caceres and D.S. Wilkinson: Acta Metall., 1984, vol. 32, pp. 423–34.10.1016/0001-6160(84)90116-0 ↗
32. C.I. Smith, B. Sorgate, and N. Ridley: Met. Sci., 1976, vol. 10, pp. 182–90.10.1179/msc.1976.10.5.182 ↗
33. T. Chandra, J.J. Jonas, and D.M.R. Taplin: J. Aust. Inst. Met., 1975, vol. 20, pp. 220–26.
34. K. Matsuki, Y. Uetani, M. Yamata, and Y. Murakami: Met. Sci., 1976, vol. 10, pp. 235–40.10.1016/0036-9748(76)90369-0 ↗
35. C.W. Humphries and N. Ridley: J. Mater. Sci., 1978, vol. 13, pp. 2477–82.10.1007/BF00808064 ↗
36. D.A. Woodford: Trans. ASM, 1969, vol. 26, pp. 291–93.