journal article·2003-09

Elasto-plastic load transfer in bulk metallic glass composites containing ductile particles

Dorian K. Balch, Ersan Üstündag, David C. Dunand

Publisher page

Abstract

In-situ diffraction experiments were performed with high-energy synchrotron X-rays to measure strains in crystalline reinforcing particles (5 and 10 vol. pct W or 5 vol. pct Ta) of bulk metallic glass composites. As the composites were subjected to multiple uniaxial tensile load/unload cycles up to applied stresses of 1650 MPa, load transfer from the matrix to the stiffer particles was observed. At low applied loads, where the particles are elastic, agreement with Eshelby elastic predictions for stress partitioning between matrix and particles is found, indicating good bonding between the phases. At high applied loads, departure from the elastic stress partitioning is observed when the particles reach the von Mises yield criterion, as expected when plasticity occurs in the particles. Multiple mechanical excursions in the particle plastic region lead to strain hardening in the particles, as well as evolution in the residual strain state of the unloaded composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Cultural Heritage Materials Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56.10.1557/S0883769400053252 ↗
2. R.D. Conner, H. Choi-Yim, and W.L. Johnson: J. Mater. Res., 1999, vol. 14, pp. 3292–97.10.1557/JMR.1999.0445 ↗
3. R.D. Conner, R.B. Dandliker, and W.L. Johnson: Acta Mater., 1999, vol. 46, pp. 6089–6102.10.1016/S1359-6454(98)00275-4 ↗
4. H. Choi-Yim, R.D. Conner, F. Szuecs, and W.L. Johnson: Scripta Mater., 2001, vol. 45, pp. 1039–45.10.1016/S1359-6462(01)01134-4 ↗
5. C. Fan, R.T. Ott, and T.C. Hufnagel: Appl. Phys. Lett., 2002, vol. 81, pp. 1020–22.10.1063/1.1498864 ↗
6. A.J. Allen, M.A.M. Bourke, S. Dawes, M.T. Hutchings, and P.J. Withers: Acta Metall. Mater., 1992, vol. 40, pp. 2361–73.10.1016/0956-7151(92)90155-8 ↗
7. N. Shi, M.A.M. Bourke, J.A. Roberts, and J.E. Allison: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2741–53.10.1007/s11661-997-0031-8 ↗
8. M.R. Daymond, C. Lund, M.A.M. Bourke, and D.C. Dunand: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2989–97.10.1007/s11661-999-0136-3 ↗
9. A. Wanner and D.C. Dunand: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2949–62.10.1007/BF02830344 ↗
10. E. Maire, A. Owen, J.-Y. Buffiere, and P.J. Withers: Acta Mater., 2001, vol. 49, pp. 153–63.10.1016/S1359-6454(00)00218-4 ↗
11. M.R. Daymond and P.J. Withers: Scripta Mater., 1996, vol. 35, pp. 1229–34.10.1016/1359-6462(96)00274-6 ↗
12. A. Wanner and D.C. Dunand: J. Neutron Res., 2001, vol. 9, pp. 495–501.10.1080/10238160108200182 ↗
13. H. Choi-Yim: Ph.D. Thesis, California Institute of Technology, Pasadena, CA, 1998.
14. Handbook of Elastic Properties of Solids, Liquids, and Gases, Academic Press, San Diego, CA, 2001, vol. 2, p. 100.
15. Metals Handbook, 10th ed, ASM INTERNATIONAL, Materials Park OH, 1990, vol. 2, pp. 576 and 580.
16. I.C. Noyan and J.B. Cohen: Residual Stress—Measurement by Diffraction and Interpretation, Springer-Verlag, New York, NY, 1987, p.145.
17. D. Dragoi, E. Ustundag, B. Clausen, and M.A.M. Bourke: Scripta Mater., 2001, vol. 45, pp. 245–52.10.1016/S1359-6462(01)01031-4 ↗
18. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, UK, 1993, pp. 44–70 and 108–12.10.1017/CBO9780511623080.004 ↗
19. C.C. Hays, C.P. Kim, and W.L. Johnson: Phys. Rev. Lett., 2000, vol. 84, pp. 2901–04.10.1103/PhysRevLett.84.2901 ↗
20. M.A. Meyers and K.K. Chawla: Mechanical Metallurgy, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1984, pp. 55 and 76.