journal article·2003-09

Deformation mechanisms in Ti-6Al-4V/TiC composites

A. J. Wagoner Johnson, K. S. Kumar, C. L. Briant

Publisher page

Abstract

The compressive behavior at room temperature of Ti-6Al-4V/TiC composites was examined at strain rates from 0.1 to 1000 s−1. As little as 1 vol pct TiC particulates provided greater than a 20 pct increase in strength over that of the monolithic Ti-6Al-4V, while further additions of TiC did not provide proportional benefits. Microstructural examination before and after compression testing was instrumental in understanding the relative importance of the primary strengthening mechanism in the composites as compared to the monolithic material. A comparison of the various possible mechanisms clearly showed that the dominant mechanism was due to carbon in solid solution. At low strain rates, the failure process consisted of a progression of damage in the matrix and at particle-matrix boundaries, while at high strain rates, failure occurred along adiabatic shear bands. The composites had a greater susceptibility to adiabatic shear-band formation than did the monolithic material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. C.R. Brooks: Heat Treatment, Structure and Properties of Nonferrous Alloys, ASM, Metals Park, OH, 1982, p. 330.
2. W.F. Smith: Structure and Properties of Engineering Alloys, McGraw-Hill Book Company, New York, NY, 1981, p. 438.
3. D.E. Alman, H.A. Hawk, and J.W. Simmons: Advances in Powder Metallurgy: Proc. 1997 Int. Conf. on Powder Metallurgy and Particulate Materials, Metal Powder Industries Federation, Princeton, NJ, 1997, vol. 1, pp. 7–3.
4. L.W. Meyer, L. Krueger, W. Gooch, and M. Burkins: J. Phys., 1997, vol. IV-7, pp. C3-415–C3-422.
5. D. Upadhyaya, M. Wood, C.M. Ward-Close, P. Tsakiropolous, and F.H. Froes: J. Met., 1994, vol. 11, pp. 62.
6. P.R. Smith and F.H. Froes: J. Met., 1984, vol. 3, p. 21.
7. S. Ranganath: J. Mater. Sci., 1997, vol. 32, p. 1.
8. R.J. Lederich, W.O. Soboyejo, and T.S. Srivatsan: J. Met., 1994, vol. 11, p. 68.
9. M.H. Loretto and D. Konitzer: Metall. Mater. Trans. A, 1990, vol. 21, 157–87.10.1007/BF02672573 ↗
10. D.G. Konitzer and M.H. Loretto, Acta. Metall., 1989 vol. 37, p. 397.10.1016/0001-6160(89)90224-1 ↗
11. P. Wanjara, R.A.L. Drew, J. Root, and S. Yue: Acta Mater., 2000, vol. 48, p. 1443.10.1016/S1359-6454(99)00453-X ↗
12. G.S. Upadhaya: Nature and Properties of Refractory Carbides, Nova Science Publishers, Inc., Hauppage, NY, 1996.
13. P.S. Follansbee: Metals Handbook, ASM, Metals Park, OH, 1985, p. 198.
14. P.S. Follansbee and C. Frantz: J. Eng. Mater. Technol., 1983, vol. 105, p. 61.10.1115/1.3225620 ↗
15. A. Wagoner Johnson, C.L. Briant, C.W. Bull, and K.S. Kumar: in Light-weight Alloys for Aerospace Application, K. Jata, E.W. Lee, W. Frazier, and N. Kim, eds., TMS, Warrendale, PMT, 2001, pp. 262–71.
16. A.J. Wagoner Johnson, C.W. Bull, K.S. Kumar, and C.L. Briant: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 295–306.10.1007/s11661-003-0331-6 ↗
17. E.K. Storms: Refractory Carbides, Academic Press, New York, NY, 1967.
18. H. Goretzki: Phys. Satus Solidi, vol. 20K, 1967, p. 141.10.1002/pssb.19670200260 ↗
19. P.S. Follansbee and G.T. Gray III: Metall. Trans. A, 1989, vol. 20A, pp. 863–74.10.1007/BF02651653 ↗
20. M.H. Yoo: Metall. Trans. A, 1981, vol. 12A, pp. 409–18.10.1007/BF02648537 ↗
21. S.P. Timothy and I.M. Hutchings: Acta Metall., 1985, vol. 33, pp. 667–76.10.1016/0001-6160(85)90030-6 ↗
22. R.J. Arsenault and N. Shi: Mater. Sci. Eng., 1986, vol. 81, p. 175.10.1016/0025-5416(86)90261-2 ↗
23. A.J. Wagoner Johnson: Ph.D. Dissertation, Brown University, Providence, RI, 2002.
24. J.D. Eshelby: Proc. R. Soc., 1967, vol. A241, p. 376.
25. L.M. Brown and D.R. Clark: Acta Metall., 1975, vol. 23, p. 821.10.1016/0001-6160(75)90198-4 ↗
26. H.R. Ogden, R.I. Jaffee, and F.C. Holden: J. Met., 1955, vol. 203, p. 73.
27. Binary Alloy Phase Diagrams, 1986, T.B. Massalski, ed., ASM, Metals Park, OH, 1986, p. 1.