Precipitation strengthening in K5-series γ-TiAl alloyed with silicon and carbon
Source abstract
Abstract
Interstitial additions and precipitation hardening in fully lamellar gamma TiAl have been investigated in recent years, with a prime objective of improving the high-temperature creep resistance. As a result of this alloy development effort, the alloy system K5 (Ti46Al-2Cr-3Nb-0.2W) was found to show remarkably improved creep resistance when reinforced with C or C + Si additions and then aged appropriately. Precipitation strengthening is the proposed mechanism accounting for the observed creep strengthening of K5SC alloys, with emphasis being paid on the effect of B2 particles, ξ-type silicides, and H-type carbide precipitates delineating y/y interfaces. In this study, the creep-deformed microstructures of fully lamellar K5 (S-C)-type alloys in aged and unaged conditions were characterized using detailed electron microscopy, involving high-resolution imaging techniques and in-situ heating studies. Overall, the presence of these particles and their relative distribution result in strengthening of the lamellar structure. The particular effect of each type of precipitate (silicides vs carbides) on creep has been assessed. New information about the nature of the light-element precipitation processes has been obtained by studying the nucleation and growth of the carbide and silicide precipitates at the expense of dissolving α 2 laths during aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Y.-W. Kim: JOM, 1994, vol. 46 (7), pp. 30–40.10.1007/BF03220745 ↗
2. Y.-W. Kim: Mater. Sci. Eng., 1995, vol. A192, pp. 519–33.10.1016/0921-5093(94)03271-8 ↗
3. Y.-W. Kim: Paper presented at TMS Symp. on “Solute Effects in Intermetallics,” TMS Fall Meeting, Rosemont, IL, 1998.
4. T.A. Parthasarathy, M.G. Mindiratta, and D.M. Dimiduk: Scripta Mater., 1997, vol. 37, pp. 315–20.10.1016/S1359-6462(97)00099-7 ↗
5. P.I. Gouma and M.J. Mills: Phil. Mag. Lett., 1998, vol. 78 (1), pp. 59–66.10.1080/095008398178264 ↗
6. P.I. Gouma, K. Subramanian, Y.-W. Kim, and M.J. Mills: Intermetallics, 1998, vol. 6, pp. 689–93.10.1016/S0966-9795(98)00030-2 ↗
7. P.I. Gouma, K. Subramanian, Y.-W. Kim, and M.J. Mills: Mater. Res. Soc. Symp. Proc., 1999, vol. 487, pp. KK2.11.1-KK2.11.6.
8. S. Tsuyama, S. Mitao, and K. Minakawa: Mater. Sci. Eng. A, 1992, vol. 153, pp. 451–56.10.1016/0921-5093(92)90236-T ↗
9. G.-X. Wang, B. Dogan, F.-Y. Hsu, H.-J. Klaar, and M. Dahms: Metall. Mater. Trans. A, 1993, vol. 26, pp. 691–701.10.1007/BF02663918 ↗
10. F.-Y. Hsu, G.-X. Wang, and H.J. Klaar: Scripta Metall. Mater., 1995, vol. 33 (4), pp. 597–601.10.1016/0956-716X(95)00268-Z ↗
11. F.-S. Sun, S.-E. Kim, C.-X. Cao, Y.-T. Lee, and M.G. Yan: Scripta. Mater., 2001, vol. 45, pp. 383–89.10.1016/S1359-6462(01)01012-0 ↗
12. R. Yu, L.L. He, J.T. Guo, H.Q. Ye, and V. Lupinc: Acta. Mater., 2000, vol. 48, pp. 3701–10.10.1016/S1359-6454(00)00167-1 ↗
13. T. Noda, M. Okabe, S. Isobe, and M. Sayashi: Mater. Sci. Eng. A, 1995, vols. 192–193, pp. 774–79.10.1016/0921-5093(94)03313-7 ↗
14. D.Y. Seo, T.R. Bieler, S.U. An, and D.E. Larsen: Metall. Mater. Trans., A, 1998, vol. 29A, pp. 89–98.10.1007/s11661-998-0161-7 ↗
15. W.R. Chen, J. Beddoes, and L. Zhao: Mater. Sci. Eng., 2002, vol. A323, pp. 306–17.10.1016/S0921-5093(01)01391-0 ↗
16. S. Chen, P.A. Beaven, and R. Wagner: Scripta Mater., 1992, vol. 26, pp. 1205–10.10.1016/0956-716X(92)90564-U ↗
17. W.H. Tian, K. Harada, R. Nakashima, T. Sano, and Minoru Nemoto: J. Jpn. Inst. Met., 1993, vol. 57 (11), pp. 1235–43.10.2320/jinstmet1952.57.11_1235 ↗
18. W.H. Tian and M. Nemoto: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, p. 689.
19. P.I. Gouma, S. Davey, and M.H. Loretto: Mater. Sci. Eng. A, 1998, vol. 241, pp. 151–58.10.1016/S0921-5093(97)00483-8 ↗
20. W.H. Tian and M. Nemoto: Intermetallics, 1997, vol. 5, pp. 237–44.10.1016/S0966-9795(96)00086-6 ↗
21. B.D. Worth, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 1995, vol. 26A, p. 2961.10.1007/BF02669652 ↗
22. M. Oehring, F. Appel, P.J. Ennis, and R. Wagner: Intermetallics, 1999, vol. 7, pp. 335–45.10.1016/S0966-9795(98)00113-7 ↗
23. Y.-W. Kim: UES Inc., Dayton, OH, unpublished research.
24. T.T. Cheng and M.R. Willis: Scripta Mater., 1998, vol. 39 (9), pp. 1255–65.10.1016/S1359-6462(98)00300-5 ↗
25. G.L. Chen, L.C. Zhang, and W.J. Zhang: Intermetallics, 1999, vol. 7, pp. 1211–18.10.1016/S0966-9795(99)00024-2 ↗
26. X.-W. Du, J.N. Wang, and J. Zhu: Intermetallics, 2001, vol. 9, pp. 745–53.10.1016/S0966-9795(01)00041-3 ↗
27. J.N. Wang, J. Zhu, J.S. Wu, and X.W. Du: Acta Mater., 2002, vol. 50, pp. 1307–18.10.1016/S1359-6454(01)00426-8 ↗
28. F. Perdrix, M.-F. Trichet, J.-L. Bonnentien, M. Cornet, and J. Bigot: Intermetallics, 2001, vol. 9, pp. 807–15.10.1016/S0966-9795(01)00066-8 ↗
29. S. Karthikeyan, G.B. Viswanathan, P.I. Gouma, V.K. Vasudevan, Y.-W. Kim, and M.J. Mills: Mater. Sci. Eng., 2002, vols. A329–A331, pp. 621–30.10.1016/S0921-5093(01)01659-8 ↗