journal article·2002-06

Phase formation and microstructure in sputter-deposited Ti-Mo-C and Ti-W-C thin films

Sirma H. Koutzaki, James E. Krzanowski, Jose J. Nainaparampil

Publisher page

Abstract

Ti-Mo-C and Ti-W-C films were deposited by cosputtering from carbide targets in order to examine the phase formation, microstructure, and mechanical properties. A series of Ti-Mo-C films were deposited, with compositions ranging from TiC to Mo2C. The X-ray diffraction (XRD) analysis showed that multiphase Ti-Mo-C films, containing the (Ti,Mo)C, Mo2C, and Mo3C2 phases, were only obtained in highly Mo-rich films. The transmission electron microscopy (TEM) analysis showed a higher defect content in single-phase alloy Ti-Mo-C films in comparison to TiC alone. The hardness for most Ti-Mo-C films was in the range of 8 to 10 GPa, but even lower values were obtained in the multiphase films. Ti-W-C films deposited by cosputtering of TiC and WC formed only (Ti,W)C solid solutions. The X-ray photoelectron spectroscopy (XPS) analysis of peak positions showed that the W 4f7/2 binding energy decreased with increasing W content. The hardness of most of the Ti-W-C coatings was in the range of 15 to 17 GPa; however, a sample with 40 pct W had a hardness of 29 GPa. The TEM analysis of this sample revealed an extremely small grain size and a higher film density. The high hardness of this specimen is attributed to Hall-Petch strengthening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. G. Georgiev, N. Feschiev, D. Popov, and Z. Uzunov: Vacuum, 1986, vol. 36, pp. 595–97.10.1016/0042-207X(86)90327-1 ↗
2. J.-E. Sundgren, B.-O. Johansson, and S.-E. Karlsson: Thin Solid Films, 1983, vol. 105, pp. 353–66.10.1016/0040-6090(83)90318-8 ↗
3. A.A. Voevodin, S.V. Prasad, and J.S. Zabinski: J. Appl. Phys., 1997, vol. 82, pp. 855–58.10.1063/1.365784 ↗
4. P.K. Srivastava, V.D. Vankar, and K.L. Chopra: J. Vac. Sci. Technol. A, 1985, vol. 3, pp. 2129–34.10.1116/1.573266 ↗
5. P. Gouy-Pailler and Y. Pauleau: J. Vac. Sci. Technol. A, 1993, vol. 11, pp. 96–102.10.1116/1.578725 ↗
6. W.F. Brock, J.E. Krzanowski, R.E. Leuchtner, L.J. Legore, and D.J. Frankel: Mater. Res. Soc. Symp. Proc., 1998, vol. 505, pp. 261–66.10.1557/PROC-505-261 ↗
7. J.-E. Sundgren, B.-O. Johansson, S.-E. Karlsson, and H.T.G. Hentzell: Thin Solid Films, 1983, vol. 105, pp. 367–84.10.1016/0040-6090(83)90319-X ↗
8. A.A. Voevodin and J.S. Zabinski: J. Mater. Sci., 1998, vol. 33, pp. 319–27.10.1023/A:1004307426887 ↗
9. J.E. Krzanowski and R.E. Leuchtner: Mater. Res. Soc. Symp. Proc., 1996, vol. 410, pp. 301–06.10.1557/PROC-410-301 ↗
10. J.E. Krzanowski and R.E. Leuchtner: J. Am. Ceram. Soc., 1997, vol. 80, pp. 1277–80.10.1111/j.1151-2916.1997.tb02976.x ↗
11. T. Slimani, P. Goudeau, A. Naudon, G. Farges, and J.L. Derep: J. Appl. Cryst., 1991, vol. 24, pp. 638–44.10.1107/S0021889891001450 ↗
12. C. Rebholz, J.M. Schneider, H. Ziegele, B. Rahle, A. Leyland, and A. Mattews: Vacuum, 1998, vol. 49, pp. 265–72.10.1016/S0042-207X(98)00122-5 ↗
13. I.N. Mihailescu, E. Gyorgy, G. Marin, M. Popescu, V.S. Teodorescu, J. Van Landuyt, G. Grivas, and A. Hatziapostolou: J. Vac. Sci. Technol. A, 1999, vol. 17, pp. 249–55.10.1116/1.581579 ↗
14. A.A. Voevodin, M.A. Capano, A.J. Safriet, M.S. Donley, and J.S. Zabinski: Appl. Phys. Lett., 1996, vol. 69, pp. 188–90.10.1063/1.117367 ↗
15. L. Norin, J. Lu, U. Jansson, and J.-O. Malm: J. Mater. Res., 1999, vol. 14, pp. 1589–96.10.1557/JMR.1999.0213 ↗
16. A.A. Voevodin, J.P. O’Neill, S.V. Prasad, and J.S. Zabinski: J. Vac. Sci. Technol. A, 1999, vol. 17, pp. 986–92.10.1116/1.581674 ↗
17. S. Ghaisas, R.D. Vispute, S.V. Ogale, S.M. Choudhari, S.M. Kanetkar, S.K. Kulkarni, S. Mahamuni, S. Badrinarayan, and S.V. Ghaisas: J. Mater. Res., 1992, vol. 7, pp. 3250–54.10.1557/JMR.1992.3250 ↗
18. L.E. Toth: Transition Metal Carbides and Nitrides, Nova Science, New York, NY, 1971.
19. A. Cavaleiro, M.T. Vieira, and G. Lemperiere: Thin Solid Films, 1990, vol. 185, pp. 199–217.10.1016/0040-6090(90)90085-R ↗
20. S. Veprek, P. Nesladek, A. Niederhofer, F. Glatz, M. Jilek, and M. Sima: Surf. Coating Technol., 1998, vols. 108–198, pp. 138–47.10.1016/S0257-8972(98)00618-5 ↗
21. S. Veprek: J. Vac. Sci. Technol. A, 1999, vol. 17, pp. 2401–20.10.1116/1.581977 ↗
22. H. Holleck: J. Vac. Sci. Technol. A, 1986, vol. 4, pp. 2661–69.10.1116/1.573700 ↗
23. ASM Handbook of Ternary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1995.
24. H. Holleck and H. Shulz: Thin Solid Films, 1987, vol. 153, pp. 11–17.10.1016/0040-6090(87)90165-9 ↗
25. Powder Diffraction File, Release 1998, International Center of Diffraction Data, Newtown Square, PA, 1998.
26. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Company, Reading, MA, 1978, pp. 447–78.
27. M. Ohring: Engineering Materials Science, Academic Press, Boston, MA, 1995, p. 790.
28. S.H. Koutzaki, J.E. Krzanowski, and J.J. Nainaparampril: J. Vac. Sci. Technol. A, 2001, vol. 19, pp. 1912–1918.10.1116/1.1379322 ↗
29. R. Messier, A.P. Giri, and R. Roy: J. Vac. Sci. Technol. A, 1984, vol. A2, p. 500.10.1116/1.572604 ↗
30. Y. Pauleau and P. Gouy-Pailler: J. Mater. Res., 1992, vol. 7, pp. 2070–79.10.1557/JMR.1992.2070 ↗
31. P.K. Srivastava, V.D. Vankar, and K.L. Chopra: J. Vac. Sci. Technol. A, 1986, vol. 4, pp. 2819–26.10.1116/1.573685 ↗
32. Handbook of X-ray Photoelectron Spectroscopy, J. Chastain and R. King, Jr., eds., Physical Electronics, Inc., Eden Prarie, MN, 1995, p. 41.
33. Jakob Schiøtz, Francesco D. Di Tolla, and Karsten W. Jacobsen: Nature, 1998, vol. 391, p. 561.10.1038/35328 ↗
34. A. Lasalmonie and J.L. Strudel: J. Mater. Sci., 1986, vol. 21, pp. 1837–52.10.1007/BF00547918 ↗
35. A.H. Chokshi, A. Rosen, J. Karch, and H. Gleiter: Scripta Met., 1989, vol. 23, pp. 1679–84.10.1016/0036-9748(89)90342-6 ↗