journal article·2011-03

The Effect of Solute Atoms on Aluminum Grain Boundary Sliding at Elevated Temperature

Ningning Du, Yue Qi, Paul E. Krajewski, Allan F. Bower

Publisher page

Abstract

Grain boundary sliding (GBS) is an important deformation mechanism for elevated temperature forming processes. Molecular dynamics simulations are used to investigate the effect of solute atoms in near grain boundaries (GBs) on the sliding of Al bicrystals at 750 K (477 °C). The threshold stress for GBS is computed for a variety of GBs with different structures and energies. Without solute atoms, low-energy GBs tend to exhibit significantly less sliding than high-energy GBs. Simulation results show that elements which tend to phase segregate from Al, such as Si, can enhance GBS in high-energy GBs by weakening Al bonds and by increasing atomic mobility. In comparison, intermetallic forming elements, such as Mg, will form immobile Mg-Al clusters, decrease diffusivity, and inhibit GBS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. A.J. Barnes: Mater. Sci. Forum, 1999, vols. 304–06, pp. 785–96.10.4028/www.scientific.net/MSF.304-306.785 ↗
2. J.G. Schroth: Advances in Superplasticity and Superplastic Forming, Eds. E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, TMS, Warrendale, PA, 2004, pp. 9–20.
3. D. Wolf, V. Yamakov, S.R. Phillpot, A. Mukherjee, and H. Gleiter: Acta Mater., 2005, vol. 53, pp. 1.10.1016/j.actamat.2004.08.045 ↗
4. R.N. Stevens: Phil. Mag., 1971, vol. 23, pp. 265–84.10.1080/14786437108216383 ↗
5. R. Raj and M.F. Ashby: Metall. Trans., 1971, vol. 2, pp. 1113–27.10.1007/BF02664244 ↗
6. T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
7. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol. 3, pp. 1–6.10.1016/0036-9748(69)90167-7 ↗
8. O.D. Sherby and J. Wadsworth: Prog. Mater. Sci., 1989, vol. 33, pp. 169–221.10.1016/0079-6425(89)90004-2 ↗
9. R.C. Gifkins: J. Inst. Metals, 1967, vol. 95, pp. 373–77.
10. T.G. Nieh, J. Wadsworth, and O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, UK, 1997.10.1017/CBO9780511525230 ↗
11. S. Agarwal, C.L. Briant, P.E. Krajewski, A.F. Bower, and E.M. Taleff: J. Mater. Eng. Perform., 2007, vol. 16, pp. 170–78.10.1007/s11665-007-9028-0 ↗
12. A.F. Bower and E. Wininger: J. Mech. Phys. Solids, 2004, vol. 52, pp. 1289–317.10.1016/j.jmps.2003.11.004 ↗
13. J.S. Vetrano, C.A. Lavender, and S.M. Bruemmer: Mater. Sci. Forum, 1994, vols. 170–72, pp. 225–30.10.4028/www.scientific.net/MSF.170-172.225 ↗
14. J.S. Vetrano, C.A. Lavender, and S.M. Bruemmer: Proc. 1995 124th TMS Annual Meeting, Las Vegas, NV, 1995, pp. 49–56.
15. J.S. Vetrano, C.H. Henager Jr., and V.Y. Guertsman: Advances in Superplasticity and Superplastic Forming, Eds. E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth TMS, Warrendale, PA, 2004, pp. 225–32.
16. S.X. McFadden and A.K. Mukherjee: Mat. Sci. Eng. A, 2005, vol. 395, pp. 265–68.10.1016/j.msea.2004.12.025 ↗
17. X.T. Li, T.J. Li, X.M. Li, and J.Z. Jin: Ultrason. Sonochem., 2006, vol. 13, pp. 121–25.10.1016/j.ultsonch.2005.08.005 ↗
18. T. Malis and M.C. Chaturvedi: J. Mater. Sci., 1982, vol. 17, pp. 1479–86.10.1007/BF00752263 ↗
19. X.Y. Liu and J.B. Adams: Acta Mater., 1998, vol. 46, pp. 3467–76.10.1016/S1359-6454(98)00038-X ↗
20. X.Y. Liu, P.P. Ohotnicky, J.B. Adams, C.L. Rohrer, and R.W. Hyland: Surf. Sci., 1997, vol. 373, pp. 357–70.10.1016/S0039-6028(96)01154-5 ↗
21. X. Liu, X. Wang, J. Wang, and H. Zhang: J. Phys.: Condens. Matter, 2005, vol. 17, pp. 4301–08.10.1088/0953-8984/17/27/006 ↗
22. W.P. Green, M.A. Kulas, A. Niazi, K. Oishi, E.M. Taleff, P.E. Krajewski, and T.R. McNelley: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2727–38.10.1007/BF02586106 ↗
23. F. Weinberg: Trans. AIME, 1958, vol. 212, pp. 808–17.
24. M.D. Halliday and C.J. Beevers: J. Mater. Sci., 1971, vol. 6, pp. 1254–60.10.1007/BF00552038 ↗
25. M. Kato: Trans. Jpn. Inst. Met., 1969, vol. 10, pp. 215–22.10.2320/matertrans1960.10.215 ↗
26. G. Mima, T. Oka, and T. Nishi: J. Jpn. Inst. Met., 1969, vol. 33, pp. 639–45.10.2320/jinstmet1952.33.6_639 ↗
27. S. Namilae, N. Chandra, and T.G. Nieh: Scripta Mater., 2002, vol. 46, pp. 49–54.10.1016/S1359-6462(01)01195-2 ↗
28. M.F. Ashby and R.A. Verrall: Acta. Metall., 1973, vol. 21, pp. 149–63.10.1016/0001-6160(73)90057-6 ↗
29. J.H. Gittus: J. Eng. Mater., 1977, vol. 99, pp. 244–51.10.1115/1.3443527 ↗
30. H. Fukutomi and R. Horiuchi: J. Jpn. Inst. Met., 1983, vol. 47, pp. 457–61.10.2320/jinstmet1952.47.6_457 ↗
31. Y. Qi and P.E. Krajewski: Acta Mater., 2007, vol. 55, pp. 1555–63.10.1016/j.actamat.2006.10.016 ↗
32. N. Du, A.F. Bower, P.E. Krajewski, and E.M. Taleff: Mater. Sci. Eng. A, 2008, vol. 494, pp. 86–91.10.1016/j.msea.2007.10.089 ↗
33. V.A. Ivanov and Y. Mishin: Phys. Rev. B, 2008, vol. 78, 064106.10.1103/PhysRevB.78.064106 ↗
34. T. Watanabe: Textures Microstructures, 1993, vol. 20, pp. 195.10.1155/TSM.20.195 ↗
35. J.R. Davies: ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM INTERNATIONAL, Materials Park, OH, 1993, pp. 579–80.
36. B.J. Lee, J.H. Shim, and M.I. Baskes: Phys. Rev. B, 2003, vol. 68, no. 14, 144112.10.1103/PhysRevB.68.144112 ↗
37. K. Gall, M.F. Horstemeyer, M. Van Schilfgaarde, and M.I. Baskes: J. Mech. Phys. Solids, 2000, vol. 48, pp. 2183–212.10.1016/S0022-5096(99)00086-1 ↗
38. B. Jelinek, J. Houze, S. Kim, M.F. Horstemeyer, M.I. Baskes, and S.G. Kim: Phys. Rev. B, 2007, vol. 75, 054106.10.1103/PhysRevB.75.054106 ↗
39. S. Nose: Mol. Phys., 2002, vol. 100, pp. 191–98.10.1080/00268970110089108 ↗
40. S. Nose: J. Chem. Phys., 1984, vol. 81, pp. 511–19.10.1063/1.447334 ↗
41. W.G. Hoover: Phys. Rev. A, 1985, vol. 31, pp. 1695.10.1103/PhysRevA.31.1695 ↗
42. J. Luo, V.K. Gupta, D.H. Yoon, and H.M. Meyer III: Appl. Phys. Lett., 2005, vol. 87, 231902.10.1063/1.2138796 ↗
43. V.K. Gupta, D.H. Yoon, H.M. Meyer III, and J. Luo: Acta Mater., 2007, vol 55, pp. 3131–42.10.1016/j.actamat.2007.01.017 ↗
44. X. Shi and J. Luo: Appl. Phy. Lett., 2009, vol. 94, 251908.10.1063/1.3155443 ↗
45. A. Lindemann: Z. Phys., 1910, vol. 14, pp. 609.
46. Y. Qi, T. Cagin, W.L. Johnson, and W.A. Goddard III, J. Chem. Phys., 2001, vol. 115, pp. 385.10.1063/1.1373664 ↗
47. N. Du, Y. Qi, P.E. Krajewski, and A.F. Bower: Acta Mater., 2010, in press.
48. G.S. Painter and F.W. Averill: Phys. Rev. Lett., 1987, vol. 58, pp. 234–37.10.1103/PhysRevLett.58.234 ↗
49. J.R. Trelewicz and C.A. Schuh: Phys. Rev. B, 2009, vol. 79, 094112.10.1103/PhysRevB.79.094112 ↗
50. A.J. Detor and C.A. Schuh: Acta Mater., 2007, vol. 55, pp. 4221–32.10.1016/j.actamat.2007.03.024 ↗
51. A.J. Detor and C.A. Schuh: Acta Mater., 2007, vol. 55, pp. 371–79.10.1016/j.actamat.2006.08.032 ↗
52. S.J. Dillon, M. Tang, W.C. Carter, and M.P. Harmer: Acta. Mater., 2007, vol. 55, pp. 6208–18.10.1016/j.actamat.2007.07.029 ↗
53. Y. Mishin, W.J. Boettinger, J.A. Warren, and G.B. McFadden: Acta Mater., 2009, vol. 57, pp. 3771–85.10.1016/j.actamat.2009.04.044 ↗
54. N. Chetty, M. Weinert, T.S. Rahman, and J.W. Davenport: Phys. Rev. B, 1995, vol. 52, pp. 6313–26.10.1103/PhysRevB.52.6313 ↗
55. T. Watanabe and S. Tsurekawa: Acta Mater., 1999, vol. 47, pp. 4171–85.10.1016/S1359-6454(99)00275-X ↗
56. T. Watanabe: Trans. Jpn. Inst. Met., 1986, vol. 27, pp. 73–82.
57. D.E. Cipoletti, A.F. Bower, Y. Qi, and P.E. Krajewski: Mater. Sci. Eng. A, 2009, vol. 504, pp. 175–82.10.1016/j.msea.2008.10.037 ↗