journal article·2000-06

Dilatometry study of the sintering behavior of boron-alloyed Fe-1.5 pct Mo powder

A. Molinari, S. Gialanella, G. Straffelini, T. Pieczonka, J. Kazior

Publisher page

Abstract

The effect of different boron concentrations on the sintering behavior of an Fe-1.5 pet Mo (wt pet) prealloyed powder was investigated. Sintering was carried out in a dilatometer so that all dimensional changes involved with the densification process could be followed. Several transformations were found to occur by heating powder compacts to 1200°C and then cooling them to room temperature. At high temperatures, boron promoted the formation of liquid phases that, through a more-efficient sintering kinetics, promoted a satisfactory densification. Faster heating rates also had beneficial effects on the density of the final products. From a microstructural point of view, boron tended to destabilize the ferritic phase and to form iron and molybdenum bondes. These borides can be found both in the intergranular regions, with a typical eutectic morphology, and dispersed in the ferritic matrix, in the form of nanometer-sized precipitates. This feature, having a significant effect on the hardness of the bulk material, has been ascribed to a bainite-like precipitation of borides from an undercooled austenitic phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. R.M. German: Progr. Powder Metall., 1986, vol. 42, pp. 235–47.
2. A.P. Miodownik: Powder Metall., 1985, vol. 28, pp. 151–54.10.1179/pom.1985.28.3.151 ↗
3. D.S. Madan: Int. J. Powder Metall., 1991, vol. 27 (4), pp. 339–45.
4. R.M. German: Sintering Theory and Practice, John Wiley & Sons Inc., New York, NY, 1996.
5. D.S. Madan, and R.M. German: Adv. Powder Metall., 1989, vol. 1, pp. 147–61.
6. M. Courbiere, J.F. Faure, and L. Ackermann: Adv. Powder Metall., 1992, vol. 3, pp. 57–71.
7. M. Selecka E. Dudrova, and G. Rosenberg: Deformation and Fracture in Structural PM Materials, L. Parilak and H. Danninger, eds., EPMA Bellstone, Shrewsbury, United Kingdom, 1996, vol. 1, pp. 283–87.
8. C. Toennes P. Ernst, G. Meyer, and R.M. German: Adv. Powder Metall., 1992, vol. 3, pp. 371–81.
9. A. Molinari, G. Straffelini, J. Kazior, and T. Pieczonka: Adv. Powder Metall., 1996, vol. 5 (17), pp. 3–12.
10. A. Molinari, G. Straffelini, T. Pieczonka, and J. Kazior: Int. J. Powder Metall., 1998, vol. 34 (2), pp. 21–28.
11. R. Tandon, Y. Liu, and R.M. German: Adv. Powder Metall., 1995, vol. 5, pp. 23–36.
12. H. Danninger, G. Jangg, and M. Giahi: Mater. Wissenschaft Werkstofftechnik, 1998, vol. 19, pp. 205–11.10.1002/mawe.19880190607 ↗
13. F. Velasco, N. Anton, D.M. Torralba, M. Vardavoulias, and Y. Bienvenu: Appl. Composite Mater., 1996, vol. 3, pp. 15–27.10.1007/BF00133322 ↗
14. R.M. German, K.S. Hwang, and D.S. Madan: Powder Metall. Int., 1987, vol. 19 (2), pp. 15–18.
15. A. Molinari, J. Kazior, F. Marchetti, R. Canteri, I. Cristofolini, and A. Tiziani: Powder Metall., 1994, vol. 37 (2), pp. 115–22.10.1179/pom.1994.37.2.115 ↗
16. A. Molinari, G. Straffelini, and A. Szewczyk: Proc. 1998 Powder Metallurgy World Congress and Exhibition, 1998, vol. 3, pp. 369–74.
17. S.M. Lee and S.J.L. Kang: Acta Mater., 1998, vol. 46 (9), pp. 3191–3202.10.1016/S1359-6454(97)00489-8 ↗
18. T. Ide and T. Ando: Metall. Trans. A, 1989, vol. 20A, pp. 17–24.10.1007/BF02647490 ↗
19. H.K.D.H. Bhadeshia: Bainite in Steels, Institute of Materials, London, 1992.