Fracture Resistance of Nanocrystalline Ni
Source abstract
Abstract
Atomic level simulations are used to study crack propagation mechanisms in nanocrystalline Ni. Digital samples with a mean grain size of 5 and 8 nm containing 125 grains were used. For both grain sizes, the mechanism of crack propagation involves the formation of nanocracks along grain boundaries in the vicinity of the main crack. Crack resistance curves for the two grain sizes indicate that the smaller grain sizes are more ductile, requiring higher stress intensities for crack propagation. This result is consistent with softer behavior for smaller grain sizes in the inverse Hall–Petch regime, where deformation is accommodated by grain boundary mechanisms. The present simulations specifically show that grain boundary sliding also plays an important role in crack blunting observed in these materials. In many cases, the crack is arrested as it encounters grain boundaries in its path, showing increased resistance to propagation. Increased ductility for smaller grain sizes in this regime indicates that there is a minimum in ductility as a function of grain size in these materials, located around the 10- to 12-nm grain size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Electromagnetic Effects on Materials · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Van Swygenhoven H., Spazer M., Caro A., Farkas D. (1999) Phys. Rev. B: Condens. Matter Mater. Phys. 60: 22-2510.1103/PhysRevB.60.22 ↗
2. Kumar K.S., Van Swygenhoven H., Suresh S. (2003) Acta Mater. 51: 5743-7410.1016/j.actamat.2003.08.032 ↗
3. Schiotz J., Jacobsen K.W. (2003) Science, 301: 1357-5910.1126/science.1086636 ↗
4. Yamakov V., Wolf D., Phillpot S.R., Mukherjee A.K., Gleiter H. (2002) Nat. Mater. 1: 45-4810.1038/nmat700 ↗
5. Farkas D., Van Swygenhoven H., Derlet P.M. (2002) Phys. Rev. B: Condens. Matter Mater. Phys. 66, 6010110.1103/PhysRevB.66.060101 ↗
6. Farkas D., Van Petegem S., Derlet P.M., Van Swygenhoven H. (2005) Acta Mater. 53: 3115-2310.1016/j.actamat.2005.02.012 ↗
7. Latapie A., Farkas D. (2004) Phys. Rev. B: Condens. Matter Mater. Phys. 69(13): 13411010.1103/PhysRevB.69.134110 ↗
8. Van Swygenhoven H., Farkas D., Caro A. (2000) Phys. Rev. B: Condens. Matter Mater. Phys. 62: 831-3810.1103/PhysRevB.62.831 ↗
9. Mishin Y., Mehl M., Farkas D., Papaconstantopoulos D. (1999) Phys. Rev. B: Condens. Matter Mater. Phys. 59: 3393-40710.1103/PhysRevB.59.3393 ↗
10. S.J. Plimpton: J. Comp. Phys., 1995, vol. 117, p. 1-19, www.cs.san dia.gov/~sjplimp/lammps.html
11. Latapie A., Farkas D. (2003) Scripta Mater. 48: 611-1510.1016/S1359-6462(02)00467-0 ↗
12. Frederiksen S.L., Jacobsen K.W., Schiotz J. (2004) Acta Mater. 52: 5019-2910.1016/j.actamat.2004.07.025 ↗
13. Farkas D. (2000) Phil. Mag. Lett. 80: 229-3710.1080/095008300176209 ↗
14. Li H.Q., Ebrahimi F. (2005) Adv. Mater. 17(16): 1969-7210.1002/adma.200500436 ↗
15. Li H.Q., Ebrahimi F. (2004) Appl. Phys. Lett. 84: 4307-0910.1063/1.1756198 ↗
16. Farkas D., Hyde B. (2005) Nano Lett. 5: 2403-0710.1021/nl0515807 ↗
17. Bonetti E., Campari E.G., Del Bianco L., Scipione G. (1995) Nanostruct. Mater. 6: 639-4210.1016/0965-9773(95)00139-5 ↗