Improvement of hardness and wear resistance of (TiC, TiB)/Ti-6Al-4V surface-alloyed materials fabricated by high-energy electron-beam irradiation
Source abstract
Abstract
The objective of this study is to investigate microstructure, hardness, and wear properties of three kinds of (TiC,TiB)/Ti-6Al-4V surface-alloyed materials fabricated by high-energy electron-beam irradiation. The mixtures of Ti+C, TiC+TiB2, and Ti+B4C powders and CaF2 flux were deposited on a Ti-6A1-4V substrate, and then high-energy electron beam was irradiated on these mixtures. The surface-alloyed layers of 0.9 to 1.6 mm in thickness were homogeneously formed, and contained a large amount (30 to 44 vol. pct) of hard precipitates such as TiC and TiB in the martensitic matrix. This microstructural modification improved the hardness and wear resistance of the surface-alloyed layer 2 times and 6 to 9 times, respectively, greater than that of the substrate. Particularly, the surface-alloyed material fabricated with Ti+B4C powders had a larger volume fraction of TiB and TiC homogeneously distributed in the martensitic matrix, and thus showed the best hardness and wear resistance. These findings suggested that the surface-alloying using high-energy electron-beam irradiation was economical and useful for the development of titanium-base surface-alloyed materials with improved hardness and wear properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. R. Boyer, G. Welsch, and E.W. Collings: Material Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 347–60.
2. M. Yamada: Mater. Sci. Eng., 1996, vol. A213, pp. 8–15.10.1016/0921-5093(96)10241-0 ↗
3. R.R. Boyer: Mater. Sci. Eng., 1996, vol. A213, pp. 103–14.10.1016/0921-5093(96)10233-1 ↗
4. R. Boyer, G. Welsch, and E.W. Collings: Material Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 1169–76.
5. J. Mutta Majumdar, B.L. Mordike, and I. Manna: Wear, 2000, vol. 242, pp. 18–27.10.1016/S0043-1648(00)00363-X ↗
6. D.-B. Lee: Met. Mater. Int., 2002, vol. 8, pp. 69–75.10.1007/BF03027030 ↗
7. S. Zhang, W.T. Wu, M.C. Wang, and H.C. Man: Surf. Coating Technol., 2001, vol. 138, pp. 95–100.10.1016/S0257-8972(00)01133-6 ↗
8. S.-H. Choo, S. Lee, and S.-J. Kwon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1211–21.10.1007/s11661-999-0271-x ↗
9. A. Bloyce, P.-Y. Qi, H. Dong, and T. Bell: Surf. Coating Technol., 1998, vol. 46, pp. 6025–17.
10. D. Suh, S. Lee, S.-J. Kwon, and Y. Koo: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1499–508.10.1007/s11661-997-0212-5 ↗
11. A.B. Kloosterman, B.J. Kooi, and J.T.M. De Hosson: Acta Mater., 1998, vol. 46, pp. 6205–17.10.1016/S1359-6454(98)00265-1 ↗
12. J.C. Oh, S. Lee, and M.G. Golkovski: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2995–3005.10.1007/s11661-001-0174-y ↗
13. K. Euh, J. Lee, and S. Lee: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2499–508.10.1007/s11661-001-0039-4 ↗
14. K. Euh, S.-H. Choo, and S. Lee: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2849–55.10.1007/BF02830354 ↗
15. J.C. Oh, K. Euh, S. Lee, Y. Koo, and N.J. Kim: Scripta Mater., 1998, vol. 39, pp. 1389–94.10.1016/S1359-6462(98)00325-X ↗
16. P.A. Molian and L. Hualun: Wear, 1989, vol. 130, pp. 337–52.10.1016/0043-1648(89)90187-7 ↗
17. A.F. Vaisman, S.B. Vasserman, M.G. Golkovskii, V.D. Kedo, and R.A. Salimov: About Surface Hardening by Concentrated Electron Beam at Atmosphere, Budker Institute of Nuclear Physics, Novosibirsk, Russia, 1988, preprint 73–88, pp. 5–31.
18. S.M. Gurevich: The Metallurgy and Technology of Welding the Titanium and Titanium Alloys, Naukova Dumka, Kiev, 1986, pp. 108 and 118.
19. S.M. Gurevich: The Handbook on Welding the Non Ferrous Metals, Naukova Dumka, Kiev, 1990, p. 190.
20. M. Bauccio: ASM Engineering Materials Reference Book, 2nd ed., ASM INTERNATIONAL, Metals Park, OH, 1994, p. 303.
21. R.C. Weast: Handbook of Chemistry and Physics 55th, CRC Press, Cleveland, OH, 1974, p. B-77.
22. ASTM Standard Practice for Conducting Dry Sand/Rubber Wheel Abrasion Tests, ASTM G65-83, ASTM, Philadelphia, PA, 1989.
23. R. Boyer, G. Welsch, and E.W. Collings: Material Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 620–29.
24. Y. Lin, R.H. Zee, and B.A. Chin: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 859–65.10.1007/BF02658995 ↗
25. M.E. Heyman, C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 1847–59.10.1007/BF02663215 ↗
26. Z. Fan and A.P. Midowink: J. Mater. Sci., 1994, vol. 29, pp. 1127–34.10.1007/BF00351442 ↗
27. T.B. Massalski: Binary Alloy Phase Diagram, ASM INTERNATIONAL, Metals Park, OH, 1986, vol. 1, p. 593.
28. P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1994, p. 5375.
29. C. Hu, H. Xin, L.M. Watson, and T.N. Baker: Acta Mater., 1997, vol. 45, pp. 4311–22.10.1016/S1359-6454(97)00076-1 ↗
30. D.E. Alman and J.A. Hawk: Wear, 1999, vols. 225–229, pp. 629–39.10.1016/S0043-1648(99)00065-4 ↗