Phenomenological observations on mechanical and corrosion properties of thixoformed 357 alloys: A comparison with permanent mold cast 357 alloys
Source abstract
Abstract
In the present study, the mechanical and corrosion properties of thixoformed 357 alloys were examined with different reheating temperatures, and the results were compared with those of permanent mold cast (PMC) 357 alloys. It was found that the thixoforming process significantly improved the mechanical properties (i.e., tensile elongation, impact energy, and resistance to fatigue crack propagation) and the corrosion resistance of 357 alloys. A 380 pct increase in tensile elongation and a 120 pct increase in impact energy were, for example, observed with the thixoforming process of 357 alloy in the T1-tempered condition, as compared to the PMC counterparts. The impact energy was extremely sensitive to reheating temperature due to the coarsening of eutectic Si particles. The resistance to fatigue crack propagation was also much higher for the thixoforming process than the PMC process in the T1-tempered condition. The resistance to both general corrosion and stress corrosion cracking was also greatly improved with thixoforming process. The present observations strongly suggest that the enhancement with thixoforming 357 alloy is largely associated with the size and shape of eutectic Si particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. D.B. Spencer, R. Mehrabian, and M.C. Flemings: Metall. Trans., 1972, vol. 3, pp. 1925–32.10.1007/BF02642580 ↗
2. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957–81.10.1007/BF02661090 ↗
3. Proc. 2nd Int. Conf. on the Semi-Solid Processing of Alloys and Composites, S.B. Brown and M.C. Flemings, eds., TMS, Warrendale, PA, 1993.
4. Proceedings of the Third International Conference on the Semi-Solid Processing of Alloys and Composites, M. Kiuchi, ed., Tokyo, 1994.
5. D.H. Kirkwood and P. Kapranos, eds., Proc. 4th Int. Conf. on the Semi-Solid Processing of Alloys and Composites, Sheffield, England, 1996.
6. A.K. Bashin, J.J. Moore, K.P. Young, and S. Midson, eds., Proc. 5th Int. Conf. on the Semi-Solid Processing of Alloys and Composites, Golden, CO, 1998.
7. G. Chiarmetta, ed., Proc. 4th Int. Conf. on the Semi-Solid Processing of Alloys and Composites, Sheffield, England, 1996, pp. 87–90.
8. Alexander A. Kazakov: Adv. Mater. Processes, 2000, vol. 3, pp. 31–34.
9. S.B. Brown and M.C. Flemings: Adv. Mater. Processes, 1993, vol. 143(1), pp. 36–40.
10. Y.B. Yu, P.Y. Song, S.S. Kim, and J.H. Lee: Scripta Metall., 1999, vol. 41(7), pp. 762–71.10.1016/S1359-6462(99)00215-8 ↗
11. Y.B. Yu, P.Y. Song, S.S. Kim, J.H. Lee, and M.H. Rhee: Kor. J. Mater. Res., 2000, vol. 10(1), pp. 69–76.
12. K. Shiozawa and S. Sun: Metall. Trans. A, 1995, vol. 26A, pp. 3049–51.10.1007/BF02669663 ↗
13. K. Shiozawa, S. Sun, and R.L. Eadle: Metall. Trans. A, 2000, vol. 31A, pp. 1137–45.10.1007/s11661-000-0109-z ↗
14. G. Chiarmetta and L. Zanardi, eds.: Proc. 3rd Int. Conf. on the Semi-Solid Processing of Alloys and Composites, Sheffield, England, 1994, pp. 235–44.
15. B. Bieri, P.J. Uggowetzer, M.O. Speidel, T. Imwinkelried, J. Lagemann, and J.P. Gabathuler: Proc. 5th Int. Conf. on the Semi-Solid Processing of Alloys and Composites, Golden, CO, 1998, pp. 531–37.
16. R. Fink and T.B. Witulski: Proc. 5th Int. Conf. on the Semi-Solid Processing of Alloys and Composites, Golden, CO, 1998, pp. 557–65.
17. J.C. Lee and H.I. Lee: Bull. Kor. Inst. Metall. Mater., 1997, vol. 10 (2), pp. 129–38.
18. D.H. Kim, Y.S. Han, and H.I. Lee: J. Kor. Foundrymen’s Soc., 1992, vol. 12 (2), pp. 108–24.
19. M.O. Speidel: Metall. Trans. A, 1975, vol. 6A, pp. 631–51.10.1007/BF02672284 ↗