Tensile, creep, and low-cycle fatigue behavior of a cast γ-TiAl-based alloy for gas turbine applications
Source abstract
Abstract
The influence of chemical composition on the microstructure of the γ-titanium aluminide alloy Ti-48Al-2W-0.5Si (at. pct) and the accompanying tensile, low-cycle fatigue, and creep properties has been evaluated. The study showed that small variations in chemical composition and casting procedures resulted in considerable variations in the microstructure, yielding vastly different mechanical properties. Low contents of aluminum and tungsten led to a coarse-grained lamellar (γ/α 2) microstructure with high creep resistance. A composition close to the nominal one produced a duplex (γ+γ/α 2) structure with favorable strength, ductility, and low-cycle fatigue properties. By controlling the solidification and cooling rates at casting, a pseudoduplex (PS-DP) microstructure with a unique combination of high strength and high fatigue and creep resistance can be obtained. These unique properties can be explained by the diffuse boundaries between the relatively small γ grains and the neighboring lamellar colonies, combined with semicoherent interfaces between the γ and α 2 phases. At tensile and low-cycle fatigue loading, these boundaries act like high-angle boundaries, producing a virtually fine-grained material promoting strength, whereas at creep loading, grain-boundary sliding is hindered in the semicoherent interfaces leading to high creep resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. D. Larsen and C. Govern: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 405–14.
2. S.V. Ram and J.R. Barett: in Titanium ’95: Science and Technology, P.A. Blankinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1996, pp. 88–96.
3. Y.-W. Kim: Acta Metall. Mater., 1992, vol. 40, pp. 1121–34.10.1016/0956-7151(92)90411-7 ↗
4. A. Mantle and D.K. Aspinwall: in Titanium ’95: Science and Technology, P.A. Blankinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1966, pp. 248–55.
5. P.L. Threadgill: Mater. Sci. Eng. A, 1995, vols. 192–193, pp. 640–46.10.1016/0921-5093(94)03346-3 ↗
6. Y.-W. Kim: J. Met., 1994, vol. 46, pp. 30–39.
7. C.M. Austin, T.J. Kelly, K.G. McAllister, and J.C. Chessnutin: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 413–25.
8. M. Blum, A. Choudhary, H. Scholz, G. Jarczyk, G. Frommeyer, P. Busse, and S. Knippscheer: in Gamma Titanium Intermetallics, TMS-AIME, Warrendale, PA, 1999, pp. 35–39.
9. S. Isobe and T. Noda: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 427–33.
10. T. Tetsui: Gamma Titanium Intermetallics, TMS-AIME, Warrendale, PA, 1999, pp. 15–23.
11. S.C. Huang: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.P. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 299–308.
12. V. Recina and B. Karlsson: Mater. Sci. Technol., 1999, vol. 15, pp. 57–66.10.1179/026708399773002827 ↗
13. D. Lundström and B. Karlsson: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 461–68.
14. D. Lundström, M. Knutson-Wedel, and B. Karlsson: in Gamma Titanium Intermetallics, TMS-AIME, Warrendale, PA, 1999, pp. 693–700.
15. V. Recina, J. Ahlström, and B. Karlsson: Mater. Characterization, 1997, vol. 38, pp. 287–300.10.1016/S1044-5803(97)00033-8 ↗
16. S. Mitao, S. Tsuyama, and K. Minakawa: Mater. Sci. Eng. A, 1993, vol. 143, pp. 51–62.10.1016/0921-5093(91)90725-3 ↗
17. D.R. Johnson, Y. Masuda, Y. Shimada, H. Inui, and M. Yamaguchi: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, p. 287.
18. S. Naka, M. Thomas, C. Sanches, and T. Khan: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, p. 313.
19. D. Lundström, M. Knutson-Wedel, and B. Karlsson: in Materials for Advanced Power Engineering, J. Lecomte-Beckers, F. Schubert, and P.J. Ennis, eds., European Commission, Forschungszentrum Jülich, 1998, pp. 1229–38.
20. J.P. Kuang, R.A. Harding, and J. Kampbell: Mater. Sci. Technol., 1997, vol. 15, pp. 840–50.10.1179/026708399101506490 ↗
21. A.S. Booth and S.G. Roberts: Acta Metall. Mater., 1997, vol. 45, pp. 1045–53.10.1016/S1359-6454(96)00230-3 ↗
22. R. Gnanamoorthy, Y. Mutoh, and Y. Mizuhara: Mater. Sci. Eng. A, 1995, vol. 197, pp. 69–77.10.1016/0921-5093(94)09737-2 ↗
23. J. Beddoes, L. Zhao, P. Au, D. Dudzinski, and J. Triantafillou: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 109–18.
24. K.J. Hemker, M.J. Mills, and W.D. Nix: Acta Metall. Mater., 1991, vol. 39, pp. 1901–13.10.1016/0956-7151(91)90159-X ↗
25. T.S. Rong, I.P. Jones, and R.E. Smallman: Acta Metall. Mater., 1998, vol. 46, pp. 4507–17.10.1016/S1359-6454(98)00149-9 ↗
26. J. Beddoes, W. Wallace, and L. Zhao: Int. Mater. Rev., 1995, vol. 40, pp. 197–217.10.1179/imr.1995.40.5.197 ↗
27. M.A. Morris and M. Leboeuf: J. Mater. Res., 1998, vol. 13, pp. 625–38.10.1557/JMR.1998.0079 ↗
28. S.W. Schwenker and Y.-W. Kim: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 985–92.
29. D. Lundström, E.M. Knutson-Wedel, and B. Karlsson: in Electron Microscopy 1998, H.A. Calderón Benavides and M.J. Yacamón, eds., Institute of Physics Publishing, Bristol, 1998, vol. II, pp. 73–74.
30. M. Lu and K.J. Hemker: Acta Metall. Mater., 1997, vol. 45, pp. 3573–85.10.1016/S1359-6454(97)00063-3 ↗
31. V. Recina and B. Karlsson: Mater. Sci. Eng. A, 1999, vol. 262, pp. 70–81.10.1016/S0921-5093(98)01008-9 ↗
32. ASTM Standard E606, Annual Book of Standards, ASTM, Philadelphia, PA, 1996, vol. 03.01.
33. V. Lupinc, M. Marchionni, M. Nazmy, G. Onofrio, L. Rémy, M. Staubli, and W.M. Yin: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 515–22.
34. V. Recina and B. Karlsson: Scripta Mater., 2000, vol. 43, pp. 609–15.10.1016/S1359-6462(00)00448-6 ↗
35. S.-C. Huang and E.L. Hall: Metall. Trans. A, 1991, vol. 22, pp. 427–39.10.1007/BF02656810 ↗
36. D.S. Shih, D.S. Schwartz, and J.E. O’Neal: High-Temperature Ordered Intermetallic Alloys, Materials Research Society, 1993, vol. 288, pp. 579–84.
37. S. Tsuyama, S. Mitao, and K. Minakawa: Mater. Sci. Eng. A, 1992, vol. 153, pp. 451–56.10.1016/0921-5093(92)90236-T ↗
38. B. Skrotzki, T. Rudolf, and G. Eggeler: Z. Metallkd., 1999, vol. 90, pp. 393–402.
39. B. Skrotzki, T. Rudolf, A. Dlouhy, and G. Eggeler: Scripta Mater., 1998, vol. 39, pp. 1545–51.10.1016/S1359-6462(98)00346-7 ↗
40. M.A. Morris and M. Leboeuf: Mater. Sci. Eng. A, 1997, vols. 239–240, pp. 429–37.10.1016/S0921-5093(97)00613-8 ↗
41. M.A. Morris and M. Leboeuf: Intermetallics, 1997, vol. 5, pp. 339–54.10.1016/S0966-9795(97)00002-2 ↗
42. M. Es-Souni, A. Bartels, and R. Wagner: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.P. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 335–43.
43. Z. Jin, S.-W. Cheong, and T.R. Bieler: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 975–83.
44. V. Recina: Mater. Sci. Technol., 2000, vol. 16, pp. 333–40.10.1179/026708300101507749 ↗
45. B.D. Worth, J.M. Larsen, and A.H. Rosenberger: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 563–69.
46. S.J. Balsone, J.M. Larsen, C.D. Maxwell, and J.W. Jones: Mater. Sci. Eng., 1995, vols. A192–A193, pp. 457–64.10.1016/0921-5093(94)03262-9 ↗
47. M. Yamaguchi and H. Inui: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 127–42.