Phase transformations in iron-nitride compound layers upon low-temperature annealing: Diffusion kinetics of nitrogen in ▓- and γ′-iron nitrides
Source abstract
Abstract
The ▓/γ′-iron nitride (▓-Fe3N1+x, γ′-Fe4N) compound double layers with thicknesses of about 10 µm were grown on pure α-Fe, by gas nitriding at 823 K, followed by quenching. The specimens were subsequently annealed at significantly lower temperatures, in the range of 613 to 693 K, for different periods of time. These heat treatments led to a redistribution of N, within the compound layer as well as between the compound layer and the adjacent ferrite, inducing thickness changes in the ▓-and γ′-sublayers. The microstructure and sublayer-thickness changes were analyzed by light microscopy and X-ray diffraction (XRD). The experimentally observed time and temperature dependences of the layer-thickness changes were compared with the results obtained from numerical simulations, by adopting a model based on volume diffusion in the ▓- and γ′-phases and on local equilibrium at the phase interfaces. In this manner, the intrinsic diffusion coefficient of N in the ▓-phase and the integral diffusion coefficient of N in the γ′-phase were determined for the applied range of annealing temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Source Book on Nitriding, ASM, Metals Park, OH, 1977.
2. R. Chatterjee-Fischer et al.: Wärmebehandlung von Eisenwerkstoffen. Nitrieren und Nitrocarburieren, Expert-Verlag, Renningen-Malmsheim, Germany, 1995.
3. E.J. Mittemeijer and M.A.J. Somers: Surface Eng., 1997, vol. 13, pp. 483–97.10.1179/sur.1997.13.6.483 ↗
4. H.A. Wriedt, N.A. Gokcen, and R.H. Nafziger: Bull. Alloy Phase Diagrams, 1987, vol. 8, pp. 355–77.10.1007/BF02869273 ↗
5. S. Malinov, A.J. Böttger, E.J. Mittemeijer, M.I. Pekelharing, and M.A.J. Somers: Metall. Mater. Trans. A, 1995, vol. 32A, pp. 59–73.
6. T. Liapina, A. Leineweber, and E.J. Mittemeijer: Scripta Mater., 2003, vol. 48, pp. 1643–48.10.1016/S1359-6462(03)00136-2 ↗
7. T. Liapina, A. Leineweber, and E.J. Mittemeijer: Defect Diff. Forum, 2005, vols. 237–240, pp. 1147–52.10.4028/www.scientific.net/DDF.237-240.1147 ↗
8. M.A.J. Somers and E.J. Mittemeijer: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 57–74.10.1007/BF02669794 ↗
9. L. Torchane, P. Bilger, J. Dulcy, and M. Gantois: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1823–35.10.1007/BF02651932 ↗
10. M.A.J. Somers and E.J. Mittemeijer: Metall. Trans. A, 1990, vol. 21A, pp. 901–12.10.1007/BF02656574 ↗
11. W. Schröter, R. Russev, K. Ibendorf, and E. Vatev: Wiss. Z. Techn. Hochsch. Karl-Marx-Stadt, 1982, vol. 24, pp. 786–94.
12. D. Gerardin, J. Morniroli, H. Michel, and M. Gantois: J. Mater. Sci., 1981, vol. 16, pp. 159–69.10.1007/BF00552070 ↗
13. E.J. Sonneveld and R. Delhez: ProFit, Version 1.0c, Philips Electronics NV, 1996.
14. L. Małdziński, Z. Przyłecki, and J. Kunze: Steel Res., 1986, vol. 57, pp. 645–49.10.1002/srin.198600841 ↗
15. C.F. Goodeve and K.H. Jack: Disc. Faraday Soc., 1948, vol. 4, pp. 82–91.10.1039/df9480400082 ↗
16. A. Leineweber, H. Jacobs, F. Hüning, H. Lueken, and W. Kockelmann: J. Alloys Compounds, 2001, vol. 316, pp. 21–38.10.1016/S0925-8388(00)01435-3 ↗
17. T. Liapina, A. Leineweber, E.J. Mittemeijer, and W. Kockelmann: Acta Mater, 2004, vol. 52, pp. 173–80.10.1016/j.actamat.2003.09.003 ↗
18. A. Leineweber and E.J. Mittemeijer: J. Appl. Crystallogr., 2004, vol. 37, pp. 123–35.10.1107/S0021889803026906 ↗
19. M.A.J. Somers and E.J. Mittemeijer: Metall. Trans. A, 1990, vol. 21A, pp. 189–204.10.1007/BF02656436 ↗
20. C. Wagner: Acta Metall., 1969, vol. 17, pp. 99–107.10.1016/0001-6160(69)90131-X ↗
21. B. Prenosil: Kovove Mater., 1965, vol. 3, pp. 69–87.
22. Y.M. Lakhtin and Y.D. Kogan: Nitriding of Steel, Mashinostroenie, Moscow, 1976.
23. M.A.J. Somers, N.M. van der Pers, D. Schalkoord, and E.J. Mittemijer: Metall. Trans. A, 1989, vol. 20A, pp. 1533–39.10.1007/BF02665509 ↗
24. J. Crank: The Mathematics of Diffusion. Clarendon, Oxford, United Kingdom, 1975.
25. J. Crank: Free and Moving Boundary Problems, Clarendon, Oxford, United Kingdom, 1987.
26. T. Liapina: Ph.D. Thesis, University of Stuttgart, Stuttgart, 2005.
27. M. Keddam, M.E. Djeghlal, and L. Barrallier: Appl. Surf. Sci., 2005, vol. 242, pp. 369–74.10.1016/j.apsusc.2004.09.003 ↗
28. M. Keddam, M.E. Djeghlal, L. Barrallier, and E. Salhi: Comp. Mater. Sci., 2004, vol. 29, pp. 43–48.10.1016/S0927-0256(03)00094-6 ↗
29. M.A.J. Somers: J. Phys. IV, 2004, vol. 120, pp. 21–33.
30. J. Ratajski: Z. Metallkd., 2004, vol. 95, pp. 823–28.10.3139/146.018028 ↗
31. T. Belmonte, M. Gouné, and H. Michel: Mater. Sci. Eng. A, 2001, vol. 302, pp. 246–57.10.1016/S0921-5093(00)01830-X ↗
32. L. Maldzinski, W. Liliental, G. Tymowski, and J. Tacikowski: Surf. Eng., 1999, vol. 15, pp. 377–84.10.1179/026708499101516740 ↗
33. H. Du and J. Ågren.: Z. Metallkd., 1995, vol. 86, pp. 522–29.
34. C.-K. Chang: J.-Y. Lee. and S.Y. Kim: J. Kor. Inst. Met., 1979, vol. 17, pp. 455–67.
35. A. Marciniak: Surf. Eng., 1985, vol. 1, pp. 283–88.10.1179/sur.1985.1.4.283 ↗
36. W.D. Jentzsch and S. Böhmer: Neue Hütte, 1979, vol. 24, pp. 249–53.