journal article·2004-09

Tensile behavior of friction-stir-welded A356-T6/Al 6061-T651 bi-alloy plate

Sunggon Lim, Sangshik Kim, Chang-Gil Lee, Sungjoon Kim

Publisher page

Abstract

Abnormally low tensile ductility has often been reported for the friction-stir-welded (FSWed) dissimilar metals. The mechanism(s) for such a low tensile ductility has, however, not been established. In the present study, the tensile behavior of FSWed A356-T6/Al 6061-T651 bi-alloy plate was studied to understand the underlying mechanism for the reduced tensile ductility with the friction stir welding of dissimilar metals based on thorough micrographic and fractographic observations. The present study also demonstrated that the tensile ductility of the friction-stir-welded A356-T6/Al 6061-T651 bi-alloy specimen was substantially lower than that of the weighted mean value of the uni-alloy counterparts, including A356-T6 and Al 6061-T651 alloys. Interestingly, a relatively large number of acicular shaped Si particles were observed locally in the FSWed bi-alloy specimens compared to the dominantly globular shaped particles in the FSWed uni-alloy counterpart. Moreover, these acicular shaped Si particles were found to be mostly aligned parallel to the tool-rotating direction. Such agglomerated areas of the preferentially oriented, acicular Si particles in the present study appeared to serve as initiation sites for the tensile fracture and eventually caused low tensile ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. P.S. Pao, S.J. Gill, C.R. Feng, and K.K. Sankaran: Scripta Mater., 2001, vol. 45, pp. 605–12.10.1016/S1359-6462(01)01070-3 ↗
2. W.M. Thomas and E.D. Nicholas: Mater. Design, 1997, vol. 18, pp. 269–73.10.1016/S0261-3069(97)00062-9 ↗
3. O.T. Midling, J.S. Kvale, and O. Dahl: Proc. 1st Int. Symp. on Friction Stir Welding, Thousand Oaks, CA, 1999.
4. D. Lohwasser: Proc. 2nd Int. Symp. on Friction Stir Welding, Gothenburg, Sweden, 2000.
5. B.N. Padgett, C. Paglia, and R.G. Buchheit: Proc. Friction Stir Welding and Processing II, K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin, and T. Lienert, eds., TMS, Warrendale, PA, 2003, pp. 55–64.
6. G. Liu, L.E. Murr, C. Niou, J.C. McClure, and F.R. Vega: Scripta Mater., 1997, vol. 37, pp. 355–61.10.1016/S1359-6462(97)00093-6 ↗
7. J.Q. Su, T.W. Nelson, R. Mishra, and M. Mahoney: Acta Mater., 2003, vol. 51, pp. 713–29.10.1016/S1359-6454(02)00449-4 ↗
8. T.U. Seidel and A.P. Reynolds: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2879–84.10.1007/s11661-001-1038-1 ↗
9. Y. Li, E.A. Trillo, and L.E. Murr: J. Mater. Sci. Lett., 2000, vol. 19, pp. 1047–51.10.1023/A:1006795221194 ↗
10. J.A. Esparza, W.C. Davis, E.A. Trillo, and L.E. Murr: J. Mater. Sci. Lett., 2002, vol. 21, pp. 917–20.10.1023/A:1016061303955 ↗
11. S. Tanaka and M. Kumagai: Proc. 3rd Int. Symp. on Friction Stir Welding, Kobe, Japan, 2001.
12. B. Heinz and B. Skrotzki: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 489–98.10.1007/s11663-002-0059-5 ↗
13. O. Frigaard, O. Grong, and O.T. Midling: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1189–200.10.1007/s11661-001-0128-4 ↗
14. H.G. Salem, A.P. Reynolds, and J.S. Lyons: Scripta Mater., 2002, vol. 46, pp. 337–42.10.1016/S1359-6462(01)01246-5 ↗
15. O.V. Flores, C. Kennedy, L.E. Murr, D. Brown, S. Pappu, B.M. Nowak, and J.C. McClure: Scripta Mater., 1998, vol. 38, pp. 703–08.10.1016/S1359-6462(97)00551-4 ↗
16. W.B. Lee, Y.M. Yeon, and S.B. Jung: Scripta Mater., 2003, vol. 49, pp. 423–28.10.1016/S1359-6462(03)00301-4 ↗
17. R.J. Lederich, J.A. Baumann, and P.A. Oelgoetz: Proc. Friction Stir Welding and Processing, K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin, and D.P. Field, eds., TMS, Warrendale, PA, 2001, pp. 71–81.
18. J.A. Baumann, R.J. Lederich, D.R. Bolser, and R. Talwar: Proc. Friction Stir Welding and Processing II, K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin, and T. Lienert, eds., TMS, Warrendale, PA, 2003, pp. 199–207.
19. K.N. Krishnan: J. Mater. Sci., 2002, vol. 37, pp. 473–80.10.1023/A:1013701104029 ↗
20. L.E. Murr, G. Liu, and J.C. McClure: J. Mater. Sci., 1998, vol. 33, pp. 1243–51.10.1023/A:1004385928163 ↗