journal article·2001-02

Effects of microstructural morphology on quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy

Dong-Geon Lee, Sangho Kim, Sunghak Lee, Chong Soo Lee

Publisher page

Abstract

The effects of microstructural morphology on quasi-static and dynamic deformation behavior of a Ti-6Al-4V alloy were investigated in this study. Quasi-static and dynamic torsional tests were conducted using a torsional Kolsky bar for Widmanstatten, equiaxed, and bimodal microstructures, which were processed by different heat treatments, and then, the test data were analyzed in relation to microstructures, tensile properties, and fracture mode. Quasi-static torsional properties showed a tendency similar to tensile properties and ductile fracture occurred in all three microstructures. Under dynamic torsional loading, maximum shear stress of the three microstructures was higher and fracture shear strain was lower than those under quasi-static loading, but the overall tendency was similar. In the Widmanstatten and equiaxed microstructures, adiabatic shear bands were found in the deformed region of the fractured specimens. The possibility of the adiabatic shear band formation under dynamic loading was quantitatively analyzed, depending on how plastic deformation energy was distributed to either void initiation or adiabatic shear banding. It was found to be most likely in the equiaxed microstructure, whereas it was least likely in the bimodal microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. M.A. Greenfield and H. Margolin: Metall. Trans., 1972, vol. 3, pp. 2649–59.10.1007/BF02644241 ↗
2. D. Eylon, J.A. Hall, C.M. Pierce, and D.L. Ruckel: Metall. Trans. A, 1976, vol. 7A, pp. 1817–26.10.1007/BF02654976 ↗
3. A. Gysler and G. Lutjering: Metall. Trans. A, 1982, vol. 13A, pp. 1435–43.10.1007/BF02642882 ↗
4. H. Margolin, J.C. Williams, J.C. Chesnutt, and G. Lutjering: Proc. 4th Int. Conf. on Ti, 1980, vol. 1, pp. 169–16.
5. W. Lee and C. Lin: Mater. Sci. Eng., 1998, vol. A241, pp. 48–59.10.1016/S0921-5093(97)00471-1 ↗
6. J.P. Hirth and F.H. Froes: Metall. Trans. A, 1977, vol. 8A, pp. 1165–76.10.1007/BF02667402 ↗
7. J.B. Borradaile and R.H. Jeal: Proc. 4th Int. Conf. on Ti, 1980, vol. 1, pp. 141–52.
8. C.C. Chen and J.E. Coyne: Metall. Trans. A, 1976, vol. 7A, pp. 1931–41.10.1007/BF02654991 ↗
9. P.S. Follansbee and G.T. Gray III: Metall. Trans. A, 1989, vol. 20A, pp. 863–74.10.1007/BF02651653 ↗
10. S.V. Kailas, Y.V.R.K. Prasad, and S.K. Biswas: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2173–79.10.1007/BF02652318 ↗
11. M. Mier and A.K. Mukherjee: Scripta Metall. Mater., 1990, vol. 24, pp. 331–36.10.1016/0956-716X(90)90265-I ↗
12. S. Yadav and K.T. Ramesh: Mater. Sci. Eng., 1995, vol. A203, pp. 140–53.10.1016/0921-5093(95)09865-8 ↗
13. K.A. Hartley, J. Duffy, and R.H. Hawley: J. Mech. Phys. Solids, 1987, vol. 35, pp. 283–301.10.1016/0022-5096(87)90009-3 ↗
14. D.-K. Kim, S.Y. Kang, S. Lee, and K.J. Lee: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 81–92.10.1007/s11661-999-0197-3 ↗
15. Metals Handbook, 9th ed., ASM, Metals Park, OH, 1990, vol. 4, pp. 763–74.
16. Metals Handbook, 9th ed., ASM, Metals Park, OH, 1990, vol. 8, pp. 218–24.
17. D.-K. Kim, S. Lee, and H.-S. Song: Met. Mater., 1999, vol. 5, pp. 211–23.10.1007/BF03026055 ↗
18. S. Kim and S. Lee: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1753–60.10.1007/s11661-998-0328-2 ↗
19. F.S. Lin, E.A. Starke, S.B. Chakrabortty, and A. Gysler: Metall. Trans. A, 1984, vol. 15A, pp. 1229–45.10.1007/BF02644717 ↗
20. H.A. Grebe, H.-R. Pak, and M.A. Meyers: Metall. Trans. A, 1985, vol. 16A, pp. 761–75.10.1007/BF02814827 ↗
21. S. Lee, K. Cho, C.S. Lee, and W.Y. Choo: Metall. Trans. A, 1993, vol. 24A, pp. 2217–24.10.1007/BF02648596 ↗
22. K. Cho, S. Lee, S.R. Nutt, and J. Duffy: Acta Metall., 1993, vol. 41, pp. 923–32.10.1016/0956-7151(93)90026-O ↗
23. I.A. Akmoulin, M. Niinomi, and T. Kobayashi: Metall. Trans. A, 1994, vol. 25A, pp. 1655–66.10.1007/BF02668531 ↗
24. C.G. Lee and S. Lee: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 227–35.10.1007/s11661-998-0175-1 ↗
25. K. Cho, Y.C. Chi, and J. Duffy: Metall. Trans. A, 1990, vol. 21A, pp. 1161–75.10.1007/BF02698247 ↗
26. J. Wadsworth, I.G. Plamer, and D.D. Crooks: Scripta Metall., 1983, vol. 17, pp. 347–52.10.1016/0036-9748(83)90171-0 ↗
27. M.A. Meyers and C.L. Wittman: Metall. Trans. A, 1990, vol. 21A, pp. 3153–64.10.1007/BF02647311 ↗
28. C.L. Wittman, M.A. Meyers, and H.R. Pak: Metall. Trans. A, 1990, vol. 21A, pp. 707–16.10.1007/BF02671941 ↗
29. C. Zener and J.H. Hollomon: J. Appl. Phys., 1944, vol. 15, pp. 22–32.10.1063/1.1707363 ↗
30. J.W. Hutchinson: Scripta Metall., 1984, vol. 18, pp. 421–22.10.1016/0036-9748(84)90414-9 ↗
31. J. Wadworth and A.R. Pelton: Scripta Metall., 1984, vol. 18, pp. 387–92.10.1016/0036-9748(84)90459-9 ↗