journal article·2000-01

The fracture resistance of a binary TiAl alloy

Kwai S. Chan, Jessica Onstott, K. Sharvan Kumar

Publisher page

Abstract

The fracture resistance of a binary Ti-47Al (in at. pct) alloy has been investigated. The binary alloy was cast, forged, and heat treated to a fully lamellar microstructure with a colony size of either 640 or 1425 µm. Fracture toughness tests were performed in a scanning electron microscope (SEM) equipped with a loading stage. Direct observations of the fracture process indicated that crack extension commenced at a stress intensity level of 1.2 to 4 MPa√m. The crack path was primarily interlamellar and crack extension across an individual colony or across similarly oriented colonies was relatively easy. In contrast, crack arrest was prevalent when the crack encountered the boundaries of unfavorably oriented colonies. To extend into an unfavorably oriented neighboring colony, the K level of the approaching crack had to be increased significantly to renucleate a microcrack at a location away from the crack tip, resulting in the formation of an interconnecting ligament that must be fractured to further crack growth. This interaction between the crack and the microstructure led to a large variation in the slope of the K R curves. Comparison of the K R curves for the binary Ti-47Al alloy against published data for quinary Ti-47Al-xNb-yCr-zV alloys indicates that the initiation toughness of the quinary alloys is higher by a factor of 5 to 10, implying the existence of a significant beneficial effect of alloying additions on the initiation toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Energetic Materials and Combustion · Quasicrystal Structures and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Y.-W. Kim and D.M. Dimiduk: JOM, 1991, vol. 43, pp. 40–47.10.1007/BF03221103 ↗
2. Y.-W. Kim: JOM, 1994, vol. 46, pp. 30–40.10.1007/BF03220745 ↗
3. Y.-W. Kim: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 637–54.
4. D.M. Dimiduk: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 3–20.
5. C.M. Austin and T.J. Kelly: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 21–32.
6. D.S. Shih, S.-C. Huang, G.K. Scarr, H. Jang, and J.C. Chestnutt: in Microstructure/Property Relationships in Titanium Aluminides and Alloys, Y.-W. Kim and R.R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 135–48.
7. K.S. Chan and Y.-W. Kim: in Microstructure/Property Relationships in Titanium Aluminides and Titanium Alloys, Y.-W. Kim and R.R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 179–96.
8. K.S. Chan: Metall. Trans. A., 1991, vol. 22A, pp. 2021–29.10.1007/BF02669869 ↗
9. S.L. Kampe, P. Sadler, D.E. Larsen, and L. Christodoulou: in Microstructure/Property Relationships in Titanium Alloys and Titanium Aluminides, Y.-W. Kim and R.R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 313–22.
10. K.S. Chan and Y.-W. Kim: Metall. Trans. A, 1992, vol. 23A, pp. 1663–77.10.1007/BF02804362 ↗
11. K.S. Chan: Metall. Trans. A, 1993, vol. 24A, pp. 569–83.10.1007/BF02656627 ↗
12. H.E. Deve, A.G. Evans, and D.S. Shih: Acta Metall., 1992, vol. 40, pp. 1259–56.10.1016/0956-7151(92)90425-E ↗
13. K.S. Chan and Y.-W. Kim: Metall. Trans. A, 1993, vol. 24A, pp. 113–25.10.1007/BF02669609 ↗
14. K.S. Chan and D.L. Davidson: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 223–30.
15. K.S. Chan and Y.-W. Kim: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1217–28.10.1007/BF02652296 ↗
16. K.S. Chan and Y.-W. Kim: Acta Metall. Mater., 1995, vol. 43, pp. 439–51.10.1016/0956-7151(94)00278-P ↗
17. R. Gnanamoorthy, Y. Mutoh, N. Masahashi, and Y. Mizuhara: Metall. Mater: Trans. A, 1995, vol. 26A, pp. 305–13.
18. K.S. Chan: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 835–47.
19. D.J. Wissuchek, G.Z. Lucas, and A.G. Evans: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 875–92.
20. P. Bowen, N.J. Rogers, and A.W. James: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 849–65.
21. B. Dogan, D. Schoneich, K.H. Schwalbe, and R. Wagner: Intermetallics, 1996, vol. 4, pp. 61–69.10.1016/0966-9795(95)00020-Y ↗
22. D.L. Davidson and J.B. Campbell: Metall. Trans. A, 1993, vol. 24A, pp. 1555–74.10.1007/BF02646596 ↗
23. J.M. Larsen, B.D. Worth, S.J. Balsone, and J.W. Jones: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 821–34.
24. S.J. Trail and P. Bowen: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 883–92.
25. K.T. Venkateswara Rao, Y.-W. Kim, and R.O. Ritchie: Scripta Metall. Mater., 1995, vol. 33, pp. 459–65.10.1016/0956-716X(95)00208-D ↗
26. K.T. Venkateswara Rao, Y.-W. Kim, C.L. Muhlstein, and R.O. Ritchie: Mater. Sci. Eng., 1995, vols. A192–A193, pp. 474–82.10.1016/0921-5093(94)03264-5 ↗
27. K.T. Venkateswara Rao, Y.-W. Kim, and R.O. Ritchie: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 893–901.
28. K.S. Chan and D.S. Shih: Metall. Mater. Trans. A, 1997, vol. 28A, p. 79–90.10.1007/s11661-997-0084-8 ↗
29. K.S. Chan and D.S. Shih: Metall. Mater: Trans. A, 1998, vol. 29A, p. 73–87.
30. A.H. Rosenberger, B.D. Worth, and J.M. Larsen: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 55–62.
31. J. Campbell, K.T. Venkateswara Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 563–77.10.1007/s11661-999-0048-2 ↗
32. S. Mitao, S. Tsuyama, and K. Minakawa: in Microstructure/Property Relationships in Titanium Aluminides and Alloys, Y.-W. Kim and R.R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 213–26.
33. S. Mitao, T. Isawa, and S. Tsuyama: Script Metall. Mater., 1992, vol. 26, pp. 1405–10.10.1016/0956-716X(92)90657-Z ↗
34. N. Akiyama, S. Yokoshima, D.R. Johnson, K. Kishida, H. Inui, and M. Yamaguchi: in Cleavage Fracture, K.s. Chan, ed., TMS, Warrendale, PA, 1997, pp. 293–303.
35. ASTM Standard E399, Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1995, vol. 03.01, pp. 412–42.
36. A. Nagy, J.B. Campbell, and D.L. Davidson: Rev. Sci. Instrum., 1983, vol. 55, pp. 778–82.10.1063/1.1137816 ↗
37. E.A. Franke, K.J. Wenzel, and D.L. Davidson: Rev. Sci. Instrum., 1991, vol. 62, pp. 1270–79.10.1063/1.1142484 ↗
38. S.-C. Huang and D.S. Shih: in Microstructure/Property Relationships in Titanium Aluminides and Alloys, Y.-W. Kim and R. R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 135–48.
39. Y.-W. Kim: JOM, 1989, vol. 41, pp. 24–30.10.1007/BF03220267 ↗
40. P. Wang, K.S. Chan, and K.S. Kumar: Division of Engineering, Brown University, Providence, RI 02912 (P. Wang and K.S. Kumar); Southwest Research Institute, San Antonio, TX 78238 (K.S. Chan), unpublished research, 1999.