journal article·2003-03

A composite model for the grain-size dependence of yield stress of nanograined materials

B. Jiang, G. J. Weng

Publisher page

Abstract

Based on the observation that, in a nanograined material, a significant portion of atoms resides in the grain-boundary region and grain-boundary activity plays a key role for its plastic behavior, a micromechanics-based composite model is developed to calculate the transition of yield stress as the grain size decreases from the coarse grain to the nanograin regime. The development makes use of a generalized self-consistent scheme in conjunction with the secant moduli of the constituent phases and a field-fluctuation approach. The constituent grains are modeled by inclusions with a grain-size-dependent plastic property and, in order to reflect the atomic sliding inside the grain boundaries observed in molecular dynamic simulations, the grain-boundary phase is modeled as a soft, ductile material with a pressure-dependent property. Applications of the developed model to a high-density copper showed the distinctive—some experimentally observed—features: (1) the yield stress initially increases following the Hall-Petch equation, but as the grain size reduces to the nanorange, it will depart and decrease; (2) when the grain size drops to a critical value (called the critical equicohesive grain size), the slope turns negative, (3) there is a tension-compression asymmetry (or strength-differential effect) in the yield stress, and (4) parametric calculations for materials whose grains deform only elastically indicate that the Hall-Petch plot will exhibit a continuously decreasing negative slope over the entire range of grain size. Further application of the theory to palladium in the nanorange shows a continuous decrease of the yield strength with decreasing grain size. It can be generally concluded that the range following the Hall-Petch equation is dominated by the deformation of the grains, and the range with a negative slope is controlled by the plasticity of the grain boundaries. During the transitional stage, both grains and grain boundaries deform competitively.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. R.W. Siegel and G.F. Fougere: NanoStr. Mater. 1995, vol. 6, pp. 205–16.10.1016/0965-9773(95)00044-5 ↗
2. H. Gleiter: Progs. Mater. Sci., 1989, vol. 33, pp. 223–315.10.1016/0079-6425(89)90001-7 ↗
3. E.O. Hall: Proc. Phys. Soc., 1951, vol. B64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
4. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
5. L. Lu, M.L. Sui, and K. Lu: Science, 2000, vol. 287, pp. 1463–66.10.1126/science.287.5457.1463 ↗
6. B.-N. Kim, K.K. Hiraga, K. Morita, and Y. Sakka: Nature, 2001, vol. 413, pp. 288–91.10.1038/35095025 ↗
7. A.H. Chokshi, A. Rosen, J. Karch, and H. Gleiter: Scripta Metall., 1989, vol. 23, pp. 1679–83.10.1016/0036-9748(89)90342-6 ↗
8. P.G. Sanders, J.A. Eastman, and J.R. Weertman: Acta Mater., 1997(a), vol. 45, pp. 4019–25.10.1016/S1359-6454(97)00092-X ↗
9. P.G. Sanders, C.J. Youngdahl, and J.R. Weertman: Mater. Sci. Eng., 1997(b), vols. A234–A236, pp. 77–82.10.1016/S0921-5093(97)00185-8 ↗
10. J. Schiotz, F.D. Di Tolla, and K.W. Jacobser: Nature, 1998, vol. 391, pp. 561–63.10.1038/35328 ↗
11. R.M. Christensen and K.H. Lo: J. Mech. Phys. Solids, 1979, vol. 27, pp. 315–30.10.1016/0022-5096(79)90032-2 ↗
12. H. Gleiter: Acta Mater. 2000, vol. 48, pp. 1–29.10.1016/S1359-6454(99)00285-2 ↗
13. J.D. Eshelby, F.C. Frank, and F.R.N. Naborro: Phil. Mag., 1951, vol. 42, pp. 351–64.10.1080/14786445108561060 ↗
14. H. Conrad, S. Feuerstein, and L. Rice: Mater. Sci. Eng., 1967, vol. A2, pp. 157–68.10.1016/0025-5416(67)90032-8 ↗
15. R.L. Jones and H. Conrad: Trans. TMS-AIME, 1969, vol. 245, pp. 779–89.
16. G.J. Weng: J. Mech. Phys. Solids, 1983, vol. 31, pp. 193–203.10.1016/0022-5096(83)90021-2 ↗
17. R. Hill: J. Mech. Phys. Solids, 1965, vol. 13, pp. 89–101.10.1016/0022-5096(65)90023-2 ↗
18. M. Berveiller and A. Zaoui: J. Mech. Phys. Solids, 1979, vol. 26, pp. 325–44.10.1016/0022-5096(78)90003-0 ↗
19. J. Schiotz, T. Vegge, F.D. Di Tolla, and K.W. Jacobsen: Phys. Rev. B, 1999, vol. 60, pp. 11971–83.10.1103/PhysRevB.60.11971 ↗
20. H. Van Swygenhoven and A. Caro: Appl. Phys. Lett., 1997, vol. 71, pp. 1652–54.10.1063/1.119785 ↗
21. Y. Yamakov, D. Wolf, S.R. Phillpot, and H. Gleiter: Acta Mater., 2002, vol. 50, pp. 61–73.10.1016/S1359-6454(01)00329-9 ↗
22. P.E. Donovan: Acta Metall., 1989, vol. 37, pp. 445–56.10.1016/0001-6160(89)90228-9 ↗
23. D.C. Drucker: Q. Appl. Math., 1950, vol. 7, pp. 411–18.10.1090/qam/34210 ↗
24. Z. Hashin: J. Appl. Mech., 1962, vol. 29, pp. 143–50.10.1115/1.3636446 ↗
25. Z. Hashin and S. Shtrikman: J. Mech. Phys. Solids, 1963, vol. 11, pp. 127–40.10.1016/0022-5096(63)90060-7 ↗
26. G.J. Weng: Int. J. Eng. Sci., 1984, vol. 22, pp. 845–56.10.1016/0020-7225(84)90033-8 ↗
27. H.A. Lo and G.J. Weng: Mech. Mater., 1987, vol. 6, pp. 347–61.10.1016/0167-6636(87)90032-9 ↗
28. G.P. Tandon and G.J. Weng: J. Appl. Mech., 1988, vol. 55, pp. 126–35.10.1115/1.3173618 ↗
29. R. Hill: J. Mech. Phys. Solids, 1963, vol. 11, pp. 357–72.10.1016/0022-5096(63)90036-X ↗
30. M. Bobeth and G. Diener: J. Mech. Phys. Solids, 1986, vol. 34, pp. 1–17.10.1016/0022-5096(86)90002-5 ↗
31. W. Kreher and W. Pompe: Internal Stress in Heterogeneous Solids, Akademie, Berlin, 1989.10.1515/9783112707135 ↗
32. G.K. Hu: Int. J. Plasticity, 1996, vol. 12, pp. 439–49.10.1016/S0749-6419(96)00015-0 ↗
33. T.H. Courtney: Mechanical Behavior of Materials, McGraw-Hill, New York, NY, 2000, p. 60.
34. Z. Jeffries: Trans. AIME, 1919, vol. 60, p. 474.
35. C. Crussard and R. Tamhankar: Trans. TMS-AIME, 1958, vol. 212, pp. 718–30.
36. M.A. Meyers, D.J. Benson, and H.-H. Fu: in Advanced Materials for the 21st Century: The 1999 Julia R. Weertman Symp., Y.-W. Chung, D.C. Dunand, P.K. Liaw, and G.B. Olson, eds., TMS, Warrendale, PA, 1999, pp. 499–512.
37. M.A. Meyers and E. Ashworth: Phil. Mag., 1982, vol. A46, pp. 737–59.10.1080/01418618208236928 ↗