journal article·2026-05Open access

Dissolution and Creep Deformation Behavior Near the Solvus Temperature of the $$\gamma \prime \prime \prime $$-Ni$$_2$$(Cr,Mo,W) Phase in HAYNES® 244®

Victoria Tucker, Thomas R. Mann, Ian Bowley, Michael S. Titus

Abstract

Abstract HAYNES ® 244 ® alloy is a high-strength, low coefficient of thermal expansion (CTE) Ni-based superalloy designed for use up to 760 $$\circ $$ C. This alloy offers an improvement in maximum temperature operation and mechanical properties such as tensile strength and creep life over the previous generation of low CTE alloy, HAYNES ® 242 ® . Uniquely, it is strengthened through a body-centered orthorhombic (BCO) intermetallic phase, $$\gamma \prime \prime \prime $$ , a Ni $$2$$ (Cr,Mo,W) precipitate. The additions of tungsten in the 244 alloy improve the thermal stability of the strengthening domains, compared to the 242 alloy, impeding diffusional effects of dislocation motion at elevated temperatures. To probe the possible deformation mechanisms that occur during high-temperature creep, creep testing in the vicinity of the $$\gamma \prime \prime \prime $$ solvus was conducted to understand the interplay of $$\gamma \prime \prime \prime $$ phase stability, precipitation of the $$\mu $$ phase above 760 $$\circ $$ C, and the active creep deformation mechanisms. These mechanisms change from deformation twinning at the lower tested temperatures, to perfect dislocation shearing and noticeable grain boundary dislocation pile-up after the $$\gamma \prime \prime \prime $$ has completely dissolved. During the intermediate temperature testing near the solvus, but where the $$\gamma \prime \prime \prime $$ phase still remains in low volume fractions, a mixed twinning and dislocation shearing mechanism was observed. This manuscript elucidates the implications of mixed character creep deformation during high-temperature testing.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Art Kracke: Superalloy 718 and Derivatives. Wiley, New York, 2010, pp. 13–50. https://doi.org/10.1002/9781118495223.ch210.1002/9781118495223.ch2 ↗
2. Tresa M. Pollock and Sammy Tin. J. Propuls. Power, 2006, vol. 22(2), pp. 361–74.10.2514/1.18239 ↗
3. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2008.
4. M.C. Hardy, et al.: Metall. Mater. Trans. A, 2020, vol. 51(6), pp. 2626–50.10.1007/s11661-020-05773-6 ↗
5. Jonathan Jones: Encyclopedia of Materials: Metals and Alloys. Oxford: Elsevier, 2022, pp. 476–84. https://doi.org/10.1016/B978-0-12-819726-4.00112-510.1016/B978-0-12-819726-4.00112-5 ↗
6. Cuiping Wang et al.: Front. Mater. 2022, vol. 9, p. 882955.
7. Akane Suzuki, Haruyuki Inui, and Tresa M. Pollock: Annu. Rev. Mater. Res., 2015, vol. 45(1), pp. 345–68.10.1146/annurev-matsci-070214-021043 ↗
8. Blaine Geddes and Hugo Leon and Xiao Huang: Superalloys, Alloying and Performance. ASM International, 2010. https://doi.org/10.31399/asm.tb.sap.9781627083133.10.31399/asm.tb.sap.9781627083133 ↗
9. F. Binczyk, et al.: Arch. Foundry Eng., 2008, vol. 8(3), pp. 5–9.10.2478/afe-2013-0049 ↗
10. Zhang Li, S. L. Gobbi, and K. H. Richter: J. Mater. Process. Technol., 1997, vol. 70, no. 1–3, pp. 285–92.10.1016/S0924-0136(97)02939-7 ↗
11. M. Grudzień-Rakoczy, et al.: Sci. Rep., 2025, vol. 15(1), p. 18237.10.1038/s41598-025-02664-x ↗
12. Paul Michael Mignanelli, et al.: Scripta Mater., 2017, vol. 136, pp. 136–40.10.1016/j.scriptamat.2017.04.029 ↗
13. Joachim Rosler, Tatiana Hentrich, and Bodo Gehrmann: Metals, 2019, vol. 9(10), p. 1130.10.3390/met9101130 ↗
14. Magnus Anderson, et al.: Mater. Sci. Eng. A, 2017, vol. 679, pp. 48–55.
15. Wakshum Mekonnen Tucho, et al.: J. Manuf. Mater. Process., 2024, vol. 8(4) , p. 135.
16. M. Fahrmann, S. Krishna Srivastava, and Lee M. Pike: Int. Symp. Superalloys, 2012, pp. 769–77.10.7449/2012/Superalloys_2012_769_777 ↗
17. T. R. Mann, M. G. Fahrmann, and M. S. Titus: Metall. Mater. Trans. A, 2023, vol. 54, no. 5, pp. 1874–85.10.1007/s11661-022-06945-2 ↗
18. P. Wollgramm, et al.: Mater. High Temp. 2016, vol. 33(4–5), pp. 346–60.10.1080/09603409.2016.1186414 ↗
19. Timothy M. Smith, et al.: Mater. High Temp. 2016, vol. 33(4–5), pp. 372–83.
20. Caroline A. Schneider, Wayne S. Rasband, and Kevin W. Eliceiri: Nat. Methods 2012, vol. 9(7), pp. 671–75.10.1038/nmeth.2089 ↗
21. J. Schindelin, et al.: Nat. Methods, 2012, vol. 9(7), pp. 676–82.10.1038/nmeth.2019 ↗
22. Thermo-Calc Software TCNI Nickel-based Superalloys Database version 9, https://thermocalc.com/products/databases/nickel-based-alloys/ (accessed June2025).
23. Thomas Mann, Michael Titus, and Michael Fahrmann: JOM, 2024, vol. 76, no. 5 , pp. 2260–67.10.1007/s11837-024-06432-6 ↗
24. T. Mann, et al.: Acta Mater., 2024, vol. 281, p. 120453.10.1016/j.actamat.2024.120453 ↗
25. Patrice E. A. Turchi, L. Kaufman, and Zi-Kui Liu: Calphad, 2006, vol. 30(1), pp. 70–87.10.1016/j.calphad.2005.10.003 ↗
26. B. Gwalani, et al.: Acta Mater., 2016, vol. 115, pp. 372–84.10.1016/j.actamat.2016.06.014 ↗
27. A. Arya, et al.: Acta Mater., 2002, vol. 50(13), pp. 3301–15.10.1016/S1359-6454(02)00093-9 ↗
28. Thomas Mann, et al.: International Symposium on Superalloys, Springer, Berlin, 2024, pp. 53–63.10.1007/978-3-031-63937-1_5 ↗
29. J.S. Koehler: Phys. Rev., 1952, vol. 86(1), p. 52.10.1103/PhysRev.86.52 ↗
30. V. Tucker, et al.: Commun. Mater., 2025. https://doi.org/10.1038/s43246-025-01030-8.10.1038/s43246-025-01030-8 ↗
31. M. Bönisch, Y. Wu, and H. Sehitoglu: Acta Mater., 2018, vol. 153, pp. 391–403.10.1016/j.actamat.2018.04.054 ↗
32. Z.Y. Liang, Y.Z. Li, and M.X. Huang: Scripta Mater., 2016, vol. 112, pp. 28–31.10.1016/j.scriptamat.2015.09.003 ↗
33. Thomas Mann, Michael G. Fahrmann, and Michael S. Titus: Metall. Mater. Trans. A, 2022, vol. 53(12) , pp. 4188–206.10.1007/s11661-022-06797-w ↗
34. Y. Han and M.C. Chaturvedi: A study of back stress during creep deformation of a superalloy inconel 718. Mater. Sci. Eng., 1987, vol. 85, pp. 59–65.10.1016/0025-5416(87)90467-8 ↗
35. Yong-Cheng Lin, et al.: Mater. Des., 2014, vol. 55, pp. 949–57.
36. Peng Zhao, et al.: Acta Mater., 2022, vol. 236, p. 118109.10.1016/j.actamat.2022.118109 ↗