journal article·2026-02Open access

Mechanical Properties and Biocompatibility of Ti58−x–Zr40–Nbx–Al2 Medium Entropy Alloy for Osteogenic Applications

Shimaa El-Hadad, Nour M. Eldabah, Engie M. Safwat, Mohamed A. Gepreel

Abstract

Abstract Low elastic modulus and high strength properties are essential for osseous implants to avoid stress shielding without compromising strength requirements. For this reason, Ti–Zr-based medium entropy alloys (MEAs) are considered potential candidates in the medical and dental fields thanks to their low elastic modulus, high yield strength, and high biocompatible elements. In the current study, the mechanical properties and biocompatibility of arc-melted Ti 58− x –Zr 40 –Nb x –Al 2 MEAs were assessed for osteogenic applications, where x = 9 and 11 at. pct. The formation of the solid solution was verified using X-ray diffraction (XRD) in both Ti 49 –Zr 40 –Nb 9 –Al 2 and Ti 47 –Zr 40 –Nb 11 –Al 2 MEAs. The elastic modulus was physically measured using an ultrasonic echo system. Adding more Nb, which is a beta phase stabilizing element, decreased the total valence electron and hence reduced the Young’s modulus from 66 ± 1.5 GPa for 9Nb to 62 ± 2.3 GPa for 11Nb alloy. The hardness increased from 245 to 270 HV with the increase in Nb content from 9 to 11 at. pct, indicating improvement of strength by providing more solutes for solid solution strengthening. To assess the bioactivity of the prepared alloy samples, the alloys were incubated in simulated body fluid (SBF) for 4 weeks, after which they were examined using an Atomic Force Microscope (AFM) both before and after incubation. AFM results analysis showed a uniform vs nonuniform calcium phosphate layer precipitation for 9Nb and 11Nb alloys, respectively. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. B. Cantor, I. Chang, P. Knight, and A. Vincent: Mater. Sci. Eng. A, 2004, vol. 375, pp. 213–18.10.1016/j.msea.2003.10.257 ↗
2. E.P. George, D. Raabe, and R.O. Ritchie: Nat. Rev. Mater., 2019, vol. 4(8), pp. 515–34.10.1038/s41578-019-0121-4 ↗
3. W. Yang, Y. Liu, S. Pang, P.K. Liaw, and T. Zhang: Intermetallics, 2020, vol. 124, 106845.10.1016/j.intermet.2020.106845 ↗
4. X. Chen, D. Xia, Q. Jia, G. Huang, W. Wang, J. Zhang, H.N. Han, and F. Pan: J. Mater. Sci. Technol., 2024, vol. 185, pp. 69–82.10.1016/j.jmst.2023.11.008 ↗
5. I.-A. Su, K.-K. Tseng, J.-W. Yeh, B. El-Sayed, C.-H. Liu, and S.-H. Wang: Scripta Mater., 2022, vol. 206, 114225.10.1016/j.scriptamat.2021.114225 ↗
6. T. Nagase, Y. Iijima, A. Matsugaki, K. Ameyama, and T. Nakano: Mater. Sci. Eng. C, 2020, vol. 107, p. 110322.10.1016/j.msec.2019.110322 ↗
7. N.M. Eldabah, A. Pratap, A. Pandey, N. Sardana, S.S. Sidhu, and M.A.H. Gepreel: Adv. Eng. Mater., 2025, vol. 27(12), p. 2402504.10.1002/adem.202402504 ↗
8. R. Li, X. Song, Z. Duan, Z. Hao, Y. Yang, Y. Han, X. Ran, and Y. Liu: J. Alloys Compd., 2025, vol. 1012, 178515.10.1016/j.jallcom.2025.178515 ↗
9. G. Dirras, L. Lilensten, P. Djemia, M. Laurent-Brocq, D. Tingaud, J.-P. Couzinié, L. Perrière, T. Chauveau, and I. Guillot: Mater. Sci. Eng. A, 2016, vol. 654, pp. 30–38.10.1016/j.msea.2015.12.017 ↗
10. L. Liao, Y. Cheng, S. Dai, M.A. Khan, H. Zhang, and F. Li: J. Market. Res., 2024, vol. 33, pp. 683–97.
11. M. Niinomi and M. Nakai: Int. J. Biomater., 2011, vol. 2011, p. 836587.10.1155/2011/836587 ↗
12. T. Luo, Y. Shi, T. Liang, R. Cai, H. Pan, C. Zhang, P.K. Liaw, Y. Zhao, F. Jiang, and Z. Lei: J. Alloys Compd., 2025, vol. 1026, 180352.10.1016/j.jallcom.2025.180352 ↗
13. W. Yang, S. Pang, Y. Liu, Q. Wang, P.K. Liaw, and T. Zhang: Intermetallics, 2022, vol. 141, 107421.10.1016/j.intermet.2021.107421 ↗
14. Y. Iijima, T. Nagase, A. Matsugaki, P. Wang, K. Ameyama, and T. Nakano: Mater. Des., 2021, vol. 202, 109548.10.1016/j.matdes.2021.109548 ↗
15. N.M. Eldabah, S. Kobayashi, and M.A.H. Gepreel: Key Eng. Mater., 2022, vol. 931, pp. 35–40.10.4028/p-84w2s6 ↗
16. N.M. Eldabah, A. Shoukry, W.M. Khair-Eldeen, S. Kobayashi, and M.A.H. Gepreel: Key Eng. Mater., 2023, vol. 967, pp. 89–94.10.4028/p-nbmZ4t ↗
17. I. Avula, Z. Singh, S. Mukherjee, and M. Roy: Scripta Mater., 2025, vol. 257, 116478.10.1016/j.scriptamat.2024.116478 ↗
18. M.A. Hussein, A.M. Kumar, N. Ankah, and S. Saravanan: Mater. Chem. Phys., 2024, vol. 329, Article 130114. https://doi.org/10.1016/j.matchemphys.2024.130114.10.1016/j.matchemphys.2024.130114 ↗
19. J. Wang, L. Zhu, M. Zhou, L. Kong, and J. Li: J. Mater. Sci. Technol., 2025, vol. 241, pp. 298–310.10.1016/j.jmst.2025.02.096 ↗
20. N. Yang, M. Shan, G. Shi, H. Guo, S. Xiong, M. Luo, D. Zhang, and M. Cui: At. Spectrosc., 2024, vol. 45(4), pp. 324–35.10.46770/AS.2024.158 ↗
21. S.S. Sidhu, H. Singh, and M.A.-H. Gepreel: Mater. Sci. Eng. C, 2021, vol. 121, 111661.10.1016/j.msec.2020.111661 ↗
22. C. Liu, C. Yang, J. Liu, Y. Tang, Z. Lin, L. Li, H. Liang, W. Lu, and L. Wang: Front. Bioeng. Biotechnol., 2022, vol. 10, 952536.10.3389/fbioe.2022.952536 ↗
23. M. Akmal, A. Hussain, M. Afzal, Y.I. Lee, and H.J. Ryu: J. Mater. Sci. Technol., 2021, vol. 78, pp. 183–91.10.1016/j.jmst.2020.10.049 ↗
24. Z. Fang, B. Ma, E. Liang, Y. Jia, and S. Guan: Coatings, 2024, vol. 14(1), p. 25.10.3390/coatings14010025 ↗
25. Y. Kirmanidou, M. Sidira, M.-E. Drosou, V. Bennani, A. Bakopoulou, A. Tsouknidas, N. Michailidis, and K. Michalakis: BioMed. Res. Int., 2016, vol. 2016, p. 2908570.10.1155/2016/2908570 ↗
26. N.M. Eldabah, A. Shoukry, W. Khair-Eldeen, S. Kobayashi, and M.A.-H. Gepreel: J. Alloys Compd., 2023, vol. 968, p. 171755.10.1016/j.jallcom.2023.171755 ↗
27. S. Hu, T. Li, Z. Su, and D. Liu: Intermetallics, 2022, vol. 140, 107401.10.1016/j.intermet.2021.107401 ↗
28. S.W. Lee, J.H. Kim, C.H. Park, J.-K. Hong, and J.-T. Yeom: Mater. Sci. Eng. A, 2021, vol. 802, 140621.10.1016/j.msea.2020.140621 ↗
29. E.M. Safwat, S.A. Abdel-Gawad, M.A. Shoeib, and S. El-Hadad: Front. Chem. Sci. Eng., 2024, vol. 18, p. 2.10.1007/s11705-023-2368-y ↗
30. T. Kokubo and H. Takadama: Biomaterials, 2006, vol. 27(15), pp. 2907–15.10.1016/j.biomaterials.2006.01.017 ↗
31. ISO 23317:2014—The Standard Method for In Vitro Evaluation of Apatite Formation on Implant Materials Using Simulated Body Fluid (SBF). ISO
32. T. Albrektsson and C. Johansson: Eur. Spine J., 2021, vol. 10, pp. S96-101.
33. F. Baino and E. Fiume: Mater. Today Bio, 2020, vol. 8, 100083.10.1016/j.mtbio.2020.100083 ↗
34. W. Habraken, P. Habibovic, M. Epple, and M. Bohner: Mater. Today, 2016, vol. 19, pp. 69–87.10.1016/j.mattod.2015.10.008 ↗
35. A. El-Ghannam: in: Bio-implant Interface: Improving Biomaterials and Tissue Reactions, CRC Press, 2005, pp. 69–92.
36. C. Ohtsuki, T. Kokubo, and T. Yamamuro: J. Non-Cryst. Solids, 1992, vol. 143, pp. 84–92.10.1016/S0022-3093(05)80556-3 ↗
37. R.E. Hammam and E.M. Safwat: Trans. Nonferrous Met. Soc. China, 2024, vol. 34, pp. 3629–49.10.1016/S1003-6326(24)66630-6 ↗
38. Q. Yong, et al.: Polymers, 2020, vol. 12, p. 326.10.3390/polym12020326 ↗
39. J. Pengfei, B. Chen, B. Li, et al.: J. Mater. Sci. Technol., 2021, vol. 69, pp. 7–14.10.1016/j.jmst.2020.03.092 ↗
40. R.L. Fleischer: Acta Metall., 1963, vol. 11, pp. 203–09.10.1016/0001-6160(63)90213-X ↗
41. R.M. Pilliar: Biomaterials, 1991, vol. 12, pp. 95–100.10.1016/0142-9612(91)90185-D ↗
42. H. Hermawan, D. Ramdan, and J.R. Djuansjah: Biomed. Eng Theory Appl., 2011, vol. 1, pp. 411–30.
43. H.K. Lin, T.H. Hsieh, Y.H. Cheng, et al.: Int. J. Adv. Manuf. Technol., 2024, vol. 134, pp. 2693–2704.10.1007/s00170-024-14293-1 ↗
44. J. Wu, X. Tan, X. An, J. Zhang, Y. Guo, J. Liu, Y. Luo, W. Yao, Q. Kong, and Q. Wang: Mater. Today Commun., 2022, vol. 30, 103027.10.1016/j.mtcomm.2021.103027 ↗
45. S. Hu, T. Li, Z. Su, S. Meng, Z. Jia, and D. Liu: Mater. Sci. Eng. B, 2021, vol. 270, 115226.10.1016/j.mseb.2021.115226 ↗
46. M. Akmal, H.W. Seong, and H.J. Ryu: J. Mater. Sci. Technol., 2022, vol. 109, pp. 176–85.10.1016/j.jmst.2021.08.073 ↗
47. V. Nguyen, M. Qian, Z. Shi, T. Song, L. Huang, and J. Zou: Intermetallics, 2018, vol. 101, pp. 39–43.10.1016/j.intermet.2018.07.008 ↗
48. K.-K. Wong, H.-C. Hsu, S.-C. Wu, and W.-F. Ho: J. Alloys Compd., 2021, vol. 868, 159137.10.1016/j.jallcom.2021.159137 ↗
49. Y. Yuan, Y. Wu, Z. Yang, X. Liang, Z. Lei, H. Huang, H. Wang, X. Liu, K. An, and W. Wu: Mater. Res. Lett., 2019, vol. 7, pp. 225–31.10.1080/21663831.2019.1584592 ↗
50. S. El-Hadad, M. Ghaith, A. Yassin, et al.: Trans. Indian Inst. Met., 2020, vol. 73, pp. 2727–38.10.1007/s12666-020-02076-7 ↗
51. J. Mystkowska: Journal of Vibroengineering., 2009, vol. 11, pp. 725–28.
52. J. Mystkowska, P. Deptuła, and J. Sidun: Solid State Phenom., 2010, vol. 165, pp. 147–52.10.4028/www.scientific.net/SSP.165.147 ↗
53. S. Culfa and S.M. Toker: Front. Life Sci. Relat. Technol., 2023, vol. 4, pp. 111–17.10.51753/flsrt.1294479 ↗
54. M.G. Gandolfi, P. Taddei, F. Siboni, et al.: Microsc. Microanal., 2015, vol. 21, pp. 190–203.10.1017/S1431927614014615 ↗
55. S. Yang, S. Lee, I. Bajpai, et al.: Biomater. Res., 2015, vol. 19, p. 4.10.1186/s40824-014-0022-y ↗
56. E.M. Safwat, R.E. Hammam, M.E. Moussa, et al.: SN Appl. Sci., 2023, vol. 5, p. 251.10.1007/s42452-023-05477-7 ↗
57. R. Schmidt, V. Hoffmann, A. Helth, P.F. Gostin, et al.: Surf. Coat. Technol., 2016, vol. 294, pp. 186–93.10.1016/j.surfcoat.2016.03.063 ↗
58. J. Saurí, J.M. Suñé-Negre, J. Díaz-Marcos, J. Vilana, D. Millán, J.R. Ticó, M. Miñarro, P. Pérez-Lozano, and E. García-Montoya: Int. J. Pharm., 2015, vol. 478, pp. 328–40.10.1016/j.ijpharm.2014.11.054 ↗
59. K. Anselme: Biomaterials, 2000, vol. 21, pp. 667–81.10.1016/S0142-9612(99)00242-2 ↗
60. B. Majhy, P. Priyadarshini, and A.K. Sen: RSC Adv., 2021, vol. 26, pp. 15467–76.10.1039/D1RA02402G ↗
61. S. Migita and T. Yamaguchi: Rec. Prog. Mater., 2020, vol. 2, pp. 1–8.10.21926/rpm.2001003 ↗
62. S.R. Sousa, M.M. Brás, P. Moradas-Ferreira, and M.A. Barbosa: Langmuir, 2007, vol. 23, pp. 7046–54.10.1021/la062956e ↗
63. A. Pilloni, G. Pompa, M. Saccucci, et al.: BMC Oral Health, 2014, vol. 14, pp. 1–7.10.1186/1472-6831-14-22 ↗
64. A.L.A. Ribeiro, P.E.O. Laranjeira, K.A. Al-Moamer, et al.: Adv. Mater. Interfaces, 2020, vol. 7, p. 2000854.10.1002/admi.202000854 ↗
65. D. Khang, J. Lu, C. Yao, et al.: Biomaterials, 2012, vol. 33, pp. 5744–751.10.1016/j.biomaterials.2012.05.005 ↗
66. R.A. Gittens, T. McLachlan, R. Olivares-Navarrete, et al.: Acta Biomater., 2014, vol. 10, pp. 1616–25.
67. L.E. McNamara, T. Sjöström, and P.M. Reynolds: Biomaterials, 2012, vol. 33, pp. 5649–56.10.1016/j.biomaterials.2011.11.047 ↗
68. X. Lu and Y. Leng: Biomaterials, 2005, vol. 26, pp. 1097–1108.10.1016/j.biomaterials.2004.05.034 ↗
69. A. Bigi, G. Falini, E. Foresti, et al.: J. Inorg. Biochem., 1992, vol. 49, pp. 69–78.10.1016/0162-0134(93)80049-F ↗
70. L. Woo-Kul, L. Sang-Mi, and K. Hyun-Man: J. Ind. Eng. Chem., 2009, vol. 15, pp. 677–82.10.1016/j.jiec.2009.09.044 ↗