Correlative Differential Scanning Calorimetry and (Scanning) Transmission Electron Microscopy Study of the Influence of Interrupted Quenching and Natural Aging of a 6082 Alloy
Source abstract
Abstract
Abstract In this work the effect of interrupted quenching and natural aging prior to artificial aging was analyzed on the early GP-zones and resulting precipitates in a 6082 alloy by differential scanning calorimetry (DSC) and (scanning) transmission electron microscopy ((S)TEM). DSC was used to “scan” along the precipitation path and find interesting temperatures which were subsequently analyzed by (S)TEM. It was found that natural aging prior to artificial aging results in “square GP-zones”, whereas directly aging without natural aging results in mainly “ β ′′-eye” GP-zones. Furthermore, it was shown that the square GP-zones facilitate the precipitate growth, since significantly wider and longer precipitates arise from microstructures with square GP-zones. On the contrary, “ β ′′-eye” GP-zones result in many but significantly smaller precipitates. A suggested atomistic model of the square GP-zones which builds around a vacancy is suggested. Simulations of this model result in the same contrast variations in low-angle annular dark-field STEM as observed experimentally. Lastly, it was found that reducing the vacancy concentration by interrupted quenching from the solution heat treatment temperature limits the coarsening effect of the square GP-zones on the final precipitates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Aluminium Alloys—Aluminium 6082 Properties, Fabrication and Applications. (2005). https://www.azom.com/article.aspx?ArticleID=2813
2. O.R. Myhr, O. Grong, and S.J. Andersen: Acta Mater., 2001, vol. 49, pp. 65–75.10.1016/S1359-6454(00)00301-3 ↗
3. T. Saito, E.A. Mørtsell, S. Wenner, C.D. Marioara, S.J. Andersen, J. Friis, K. Matsuda, and R. Holmestad: Adv. Eng. Mater., 2018, vol. 20, 1800125.10.1002/adem.201800125 ↗
4. S.J. Andersen, C.D. Marioara, J. Friis, and S. Wenner: Adv. Phys. X, 2018, vol. 3, 1479984.
5. S. Pogatscher, M. Werinos, H. Antrekowitsch, and P.J. Uggowitzer: Mater. Sci. Forum, 2014, vol. 794–796, pp. 1008–13.10.4028/www.scientific.net/MSF.794-796.1008 ↗
6. P. Dumitraschkewitz, S.S.A. Gerstl, L.T. Stephenson, P.J. Uggowitzer, and S. Pogatscher: Adv. Eng. Mater., 2018, vol. 20, 1800255.10.1002/adem.201800255 ↗
7. J. Banhart, C.S.T. Chang, Z. Liang, N. Wanderka, M.D. Lay, and A.J. Hill: Adv. Eng. Mater., 2010, vol. 12, pp. 559–71.10.1002/adem.201000041 ↗
8. C.M. Hell, J. Frafjord, R. Bjørge, J. Friis, and R. Holmestad: Mater Charact, 2024, vol. 215, 114153.10.1016/j.matchar.2024.114153 ↗
9. C.D. Marioara, S.J. Andersen, C. Hell, J. Frafjord, J. Friis, R. Bjørge, I.G. Ringdalen, O. Engler, and R. Holmestad: Acta Mater., 2024, vol. 269, 119811.10.1016/j.actamat.2024.119811 ↗
10. J. Røyset, T. Stene, J.A. Sæter, and O. Reiso: Mater. Sci. Forum, 2006, vol. 519–521, pp. 239–44.10.4028/www.scientific.net/MSF.519-521.239 ↗
11. F.A. Martinsen, F.J.H. Ehlers, M. Torsæter, and R. Holmestad: Acta Mater., 2012, vol. 60, pp. 6091–6101.10.1016/j.actamat.2012.07.047 ↗
12. G.H. Tao, C.H. Liu, J.H. Chen, Y.X. Lai, P.P. Ma, and L.M. Liu: Mater. Sci. Eng. A, 2015, vol. 642, pp. 241–48.10.1016/j.msea.2015.06.090 ↗
13. P. Dumitraschkewitz, S.S.A. Gerstl, P.J. Uggowitzer, J.F. Löffler, and S. Pogatscher: Adv. Eng. Mater., 2017, vol. 19, 1600668.10.1002/adem.201600668 ↗
14. P. Dumitraschkewitz, P.J. Uggowitzer, S.S.A. Gerstl, J.F. Löffler, and S. Pogatscher: Nat. Commun., 2019, vol. 10, p. 1.10.1038/s41467-019-12762-w ↗
15. S. Pogatscher, H. Antrekowitsch, H. Leitner, D. Pöschmann, Z.L. Zhang, and P.J. Uggowitzer: Acta Mater., 2012, vol. 60, pp. 4496–505.10.1016/j.actamat.2012.04.026 ↗
16. J. Peng, S. Bahl, A. Shyam, J.A. Haynes, and D. Shin: Acta Mater., 2020, vol. 196, pp. 747–58.10.1016/j.actamat.2020.06.062 ↗
17. J. Banhart, M.D.H. Lay, C.S.T. Chang, and A.J. Hill: Phys. Rev. B, 2011, vol. 83, p. 14101.10.1103/PhysRevB.83.014101 ↗
18. H. Seyedrezai, D. Grebennikov, P. Mascher, and H.S. Zurob: Mater. Sci. Eng. A, 2009, vol. 525, pp. 186–91.10.1016/j.msea.2009.06.054 ↗
19. A. Kelly and R.B. Nicholson: Denki-Seiko [Electric Furn. Steel], 1966, vol. 37, pp. 65–72.10.4262/denkiseiko.37.65 ↗
20. D.W. Pashley, M.H. Jacobs, and J.T. Vietz: Philos. Mag., 1967, vol. 16, pp. 51–76.10.1080/14786436708229257 ↗
21. L. Ding, Y. Weng, S. Wu, R.E. Sanders, Z. Jia, and Q. Liu: Mater. Sci. Eng. A, 2016, vol. 651, pp. 991–98.10.1016/j.msea.2015.11.050 ↗
22. S. Pogatscher, E. Kozeschnik, H. Antrekowitsch, M. Werinos, S.S. Gerstl, J.F. Löffler, and P.J. Uggowitzer: Scr. Mater., 2014, vol. 89, pp. 53–56.10.1016/j.scriptamat.2014.06.025 ↗
23. S. Pogatscher, H. Antrekowitsch, H. Leitner, T. Ebner, and P.J. Uggowitzer: Acta Mater., 2011, vol. 59, pp. 3352–63.10.1016/j.actamat.2011.02.010 ↗
24. I. Dutta and S.M. Allen: J. Mater. Sci. Lett., 1991, vol. 10, pp. 323–26.10.1007/BF00719697 ↗
25. J. Osten, B. Milkereit, C. Schick, and O. Kessler: Materials, 2015, vol. 8, pp. 2830–48.10.3390/ma8052830 ↗
26. H. Fröck, M. Reich, B. Milkereit, and O. Kessler: Materials, 2019, vol. 12, p. 1085.10.3390/ma12071085 ↗
27. L. Jones, H. Yang, T.J. Pennycook, M.S. Marshall, S. Van Aert, N.D. Browning, M.R. Castell, and P.D. Nellist: Adv. Struct. Chem. Imaging, 2015, vol. 1, pp. 1–16.10.1186/s40679-015-0008-4 ↗
28. R.F. Egerton and S.C. Cheng: Ultramicroscopy, 1987, vol. 21, pp. 231–44.10.1016/0304-3991(87)90148-3 ↗
29. T. Malis, S.C. Cheng, and R.F. Egerton: J. Electron Microsc. Tech., 1988, vol. 8, pp. 193–200.10.1002/jemt.1060080206 ↗
30. K. Oh-ishi and T. Ohsuna: Ultramicroscopy, 2020, vol. 212, 112955.10.1016/j.ultramic.2020.112955 ↗
31. K. Iakoubovskii, K. Mitsuishi, Y. Nakayama, and K. Furuya: Microsc. Res. Tech., 2008, vol. 71, pp. 626–31.10.1002/jemt.20597 ↗
32. S.J. Andersen: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1931–37.10.1007/BF02670664 ↗
33. C.M. Hell, B. Holmedal, R. Bjørge, C.D. Marioara, and R. Holmestad: Acta Mater., 2023, vol. 256, 119095.10.1016/j.actamat.2023.119095 ↗
34. G. Kresse and J. Hafner: Phys. Rev. B, 1993, vol. 47, pp. 558–61.10.1103/PhysRevB.47.558 ↗
35. G. Kresse and J. Furthmülle: Phys. Rev. B, 1996, vol. 54, p. 11169.10.1103/PhysRevB.54.11169 ↗
36. J. Barthel: Ultramicroscopy, 2018, vol. 193, pp. 1–11.10.1016/j.ultramic.2018.06.003 ↗
37. C.M. Hell, H.S. Søreide, R. Bjørge, C.D. Marioara, Y. Li, and R. Holmestad: J. Mater. Res. Technol., 2022, vol. 21, pp. 4224–40.10.1016/j.jmrt.2022.10.139 ↗
38. R. Kahlenberg, R. Schuster, N.G. Arango, G. Falkinger, A. Stark, B. Milkereit, and E. Kozeschnik: Thermochim. Acta, 2024, vol. 740, p. 1.10.1016/j.tca.2024.179848 ↗
39. H. Fröck, C. Rowolt, B. Milkereit, M. Reich, W. Kowalski, A. Stark, and O. Kessler: J. Mater. Sci., 2021, vol. 56, pp. 19697–708.10.1007/s10853-021-06548-z ↗
40. B. Milkereit, M.J. Starink, P.A. Rometsch, C. Schick, and O. Kessler: Materials, 2019, vol. 12, p. 4083.10.3390/ma12244083 ↗
41. K. Matsuda, A. Kawai, K. Watanabe, S. Lee, C.D. Marioara, S. Wenner, K. Nishimura, T. Matsuzaki, N. Nunomura, T. Sato, and R. Holmestad: Mater. Trans., 2017, vol. 58, pp. 167–75.10.2320/matertrans.L-M2016839 ↗
42. S. Wenner, A. Lervik, E. Thronsen, C.D. Marioara, S. Kubowicz, and R. Holmestad: Mater Charact, 2021, vol. 172, 110846.10.1016/j.matchar.2020.110846 ↗
43. A. De Backer, K.H.W. van den Bos, W. Van den Broek, J. Sijbers, and S. Van Aert: Ultramicroscopy, 2016, vol. 171, pp. 104–16.10.1016/j.ultramic.2016.08.018 ↗
44. M. Torsæter, H.S. Hasting, W. Lefebvre, C.D. Marioara, J.C. Walmsley, S.J. Andersen, and R. Holmestad: J. Appl. Phys., 2010, vol. 108, p. 7.10.1063/1.3481090 ↗
45. S. Esmaeili and D.J. Lloyd: Scr. Mater., 2004, vol. 50, pp. 155–58.10.1016/j.scriptamat.2003.08.030 ↗
46. J. Buha, R.N. Lumley, A.G. Crosky, and K. Hono: Acta Mater., 2007, vol. 55, pp. 3015–24.10.1016/j.actamat.2007.01.006 ↗
47. M. Murayama and K. Hono: Acta Mater., 1999, vol. 47, pp. 1537–48.10.1016/S1359-6454(99)00033-6 ↗
48. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998, vol. 46, pp. 3893–904.10.1016/S1359-6454(98)00059-7 ↗
49. F. De Geuser, W. Lefebvre, and D. Blavette: Philos. Mag. Lett., 2006, vol. 86, pp. 227–34.10.1080/09500830600643270 ↗
50. D.B. Williams and C.B. Carter: Bull. Acad. Sci. USSR Phys. Ser. (Columbia Tech. Transl.), 2009, vol. 32, p. 2.
51. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103–12.10.1063/1.1750380 ↗
52. F.D. Fischer, J. Svoboda, F. Appel, and E. Kozeschnik: Acta Mater., 2011, vol. 59, pp. 3463–72.10.1016/j.actamat.2011.02.020 ↗
53. A.J. Hillel and P.L. Rossiter: Philos. Mag. B Phys. Condens. Matter. Stat. Mech. Electron. Opt. Magn. Prop., 1981, vol. 44, pp. 383–88.
54. G.W. Lorimer and R.B. Nicholson: The Mechanism of Phase Transformations in Crystalline Solids, Cambridge University Press, Cambridge, 1968, pp. 36–42.
55. D.A. Porter, K.E. Easterling, and M.Y. Sherif: Phase Transformations in Metals and Alloys, CRC Press, Boca Raton, 2009.