journal article·2025-09

Exploring Impact of Die Structure on Peripheral Coarse Grain Formation and Mechanical Properties of 2195 Al–Cu–Li Alloy Extrusion Plates

Yongxiao Wang, Guoqun Zhao, Xiao Xu, Xiaoxue Chen

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. A. El-Aty, Y. Xu, X. Guo, S. Zhang, Y. Ma, and D. Chen: J. Adv. Res., 2018, vol. 10, pp. 49–67. https://doi.org/10.1016/j.jare.2017.12.004.10.1016/j.jare.2017.12.004 ↗
2. R.J. Rioja and J. Liu: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3325–37. https://doi.org/10.1007/s11661-012-1155-z.10.1007/s11661-012-1155-z ↗
3. J. Huang, W. Ming, and C. Wu: Mater. Charact., 2022, vol. 194, p. 112416. https://doi.org/10.1016/j.matchar.2022.112416.10.1016/j.matchar.2022.112416 ↗
4. Y. Wang and G. Zhao: Chin. J. Mech. Eng., 2020, vol. 33, p. 64. https://doi.org/10.1186/s10033-020-00479-7.10.1186/s10033-020-00479-7 ↗
5. M. Schikorra, L. Donati, L. Tomesani, and A.E. Tekkaya: J. Mater. Process. Technol., 2008, vol. 201, pp. 156–62. https://doi.org/10.1016/j.jmatprotec.2007.11.160.10.1016/j.jmatprotec.2007.11.160 ↗
6. X. Xu, X. Ma, G. Zhao, Y. Wang, and X. Chen: Mater. Des., 2021, vol. 210, p. 110043. https://doi.org/10.1016/j.matdes.2021.110043.10.1016/j.matdes.2021.110043 ↗
7. S. Sun, Y. Fang, L. Zhang, C. Li, and S. Hu: J. Mater. Res. Technol., 2020, vol. 9, pp. 3219–29. https://doi.org/10.1016/j.matdes.2021.110043.10.1016/j.matdes.2021.110043 ↗
8. A.R. Eivani, J. Zhou, and J. Duszczyk: Philos. Mag., 2016, vol. 96, pp. 1188–96. https://doi.org/10.1080/14786435.2016.1157637.10.1080/14786435.2016.1157637 ↗
9. A.R. Eivani, H.R. Jafarian, and J. Zhou: J. Manuf. Process., 2020, vol. 57, pp. 881–92. https://doi.org/10.1016/j.jmapro.2020.07.011.10.1016/j.jmapro.2020.07.011 ↗
10. A.R. Eivani and J. Zhou: J. Alloys Compd., 2017, vol. 725, pp. 41–53. https://doi.org/10.1016/j.jallcom.2017.06.297.10.1016/j.jallcom.2017.06.297 ↗
11. D.H. Ko, B.H. Kang, D.C. Ko, and B.M. Kim: J. Mech. Sci. Technol., 2013, vol. 27, pp. 153–61. https://doi.org/10.1007/s12206-012-1213-x.10.1007/s12206-012-1213-x ↗
12. H. Zhao, L. Sun, G. Zhao, J. Yu, F. Liu, X. Sun, Z. Lv, and S. Cao: J. Mater. Sci. Technol., 2023, vol. 157, pp. 42–59. https://doi.org/10.1016/j.jmst.2023.02.013.10.1016/j.jmst.2023.02.013 ↗
13. J. Tang, L. Chen, G. Zhao, C. Zhang, and X. Chu: J. Mater. Sci. Technol., 2020, vol. 47, pp. 88–102. https://doi.org/10.1016/j.jmst.2019.11.037.10.1016/j.jmst.2019.11.037 ↗
14. P. Goik, A. Schiffl, and H.W. Höppel: Metall. Mater. Trans. A, 2023, vol. 54A, pp. 3940–56. https://doi.org/10.1007/s11661-023-07144-3.10.1007/s11661-023-07144-3 ↗
15. M. Negozio, R. Pelaccia, L. Donati, and B. Reggiani: J. Manuf. Process., 2023, vol. 99, pp. 501–12. https://doi.org/10.1016/j.jmapro.2023.05.075.10.1016/j.jmapro.2023.05.075 ↗
16. M. Negozio, A. Segatori, R. Pelaccia, B. Reggiani, and L. Donati: Mater. Charact., 2024, vol. 209, p. 113723. https://doi.org/10.1016/j.matchar.2024.113723.10.1016/j.matchar.2024.113723 ↗
17. M. Negozio, A. Segatori, R. Pelaccia, B. Reggiani, S.D. Donato, and L. Donati: Trans. Nonferrous Met. Soc., 2024, vol. 34, pp. 3170–84. https://doi.org/10.1016/S1003-6326(24)66600-8.10.1016/S1003-6326(24)66600-8 ↗
18. M. Negozio, R. Pelaccia, L. Donati, and B. Reggiani: Int. J. Adv. Manuf. Technol., 2023, vol. 129, pp. 1585–99. https://doi.org/10.1007/s00170-023-12397-8.10.1007/s00170-023-12397-8 ↗
19. Y. Mahmoodkhani, J. Chen, M.A. Wells, W.J. Poole, and N.C. Parson: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5324–35. https://doi.org/10.1007/s11661-019-05437-0.10.1007/s11661-019-05437-0 ↗
20. C. Shi, Y. Niu, Y. Lin, Q. Hu, and X. Zhang: Mater. Sci. Forum, 2021, vol. 1035, pp. 114–18. https://doi.org/10.4028/www.scientific.net/MSF.1035.114.10.4028/www.scientific.net/MSF.1035.114 ↗
21. Y. Birol, E. Gokcil, M.A. Guvenc, and S. Akdi: Mater. Sci. Eng. A, 2016, vol. 674, pp. 25–32. https://doi.org/10.1016/j.msea.2016.07.062.10.1016/j.msea.2016.07.062 ↗
22. L. Meng, A. Goyal, V. Doquet, N. Ranc, and J. Couzinié: Int. J. Fatigue, 2019, vol. 121, pp. 84–97. https://doi.org/10.1016/j.ijfatigue.2018.12.004.10.1016/j.ijfatigue.2018.12.004 ↗
23. X. Xu, G. Zhao, S. Yu, Y. Wang, X. Chen, and W. Zhang: J. Mater. Res. Technol., 2020, vol. 9, pp. 2662–78. https://doi.org/10.1016/j.jmrt.2019.12.095.10.1016/j.jmrt.2019.12.095 ↗
24. T. Funazuka, K. Dohda, N. Takatsuji, C. Hu, and N. Sukunthakan: Friction, 2023, vol. 11, pp. 1212–24. https://doi.org/10.1007/s40544-022-0649-y.10.1007/s40544-022-0649-y ↗
25. S.N. Fini: The Effect of PCG Layer Thickness on Bendability of Aluminum Extrusion Alloys, The University of British Columbia, Vancouver, 2023. https://doi.org/10.14288/1.0431399.10.14288/1.0431399 ↗
26. F.J. Humphreys and M. Hatherly: Recrystallization and Related Phenomena, 2nd ed. Elsevier, Oxford, 2012. https://doi.org/10.1016/B978-0-08-044164-1.X5000-2.10.1016/B978-0-08-044164-1.X5000-2 ↗
27. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mat. Sci. Eng. A, 1997, vol. 238, pp. 219–74. https://doi.org/10.1016/S0921-5093(97)00424-3.10.1016/S0921-5093(97)00424-3 ↗
28. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, Elsevier, Oxford, 2007. https://doi.org/10.1016/s1470-1804(07)x8002-7.10.1016/s1470-1804(07)x8002-7 ↗
29. J.S. Kallend and Y. Huang: Met. Sci., 1984, vol. 18, pp. 381–86. https://doi.org/10.1179/030634584790419890.10.1179/030634584790419890 ↗
30. W.B. Hutchinson: Int. Met. Rev., 1984, vol. 29, pp. 25–42. https://doi.org/10.1179/imtr.1984.29.1.25.10.1179/imtr.1984.29.1.25 ↗
31. I. Samajdar, B. Verlinden, L. Kestens, and P. Van Houtte: Acta Mater., 1998, vol. 47, pp. 55–65. https://doi.org/10.1016/S1359-6454(98)00337-1.10.1016/S1359-6454(98)00337-1 ↗
32. X. Lu, G. Zhao, H. Xi, C. Zhang, L. Chen, and L. Sun: Mater. Charact., 2019, vol. 151, pp. 414–28. https://doi.org/10.1016/j.matchar.2019.03.030.10.1016/j.matchar.2019.03.030 ↗
33. N. Solomon and I. Solomon: Rev. Metal. Madrid, 2010, vol. 46, pp. 396–404. https://doi.org/10.3989/revmetalm.0928.10.3989/revmetalm.0928 ↗
34. E. Giarmas and D. Tzetzis: Int. J. Adv. Manuf. Technol., 2022, vol. 119, pp. 5529–51. https://doi.org/10.1007/s00170-022-08694-3.10.1007/s00170-022-08694-3 ↗
35. X. Xu, X. Ma, G. Zhao, X. Chen, and Y. Wang: J. Alloys Compd., 2021, vol. 867, p. 159043. https://doi.org/10.1016/j.jallcom.2021.159043.10.1016/j.jallcom.2021.159043 ↗
36. B. Dutta, I. Samajdar, and M.K. Surappa: Mater. Sci. Technol., 1998, vol. 14, pp. 36–46. https://doi.org/10.1179/mst.1998.14.1.36.10.1179/mst.1998.14.1.36 ↗
37. A. Godfrey, W. Cao, N. Hansen, and Q. Liu: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2371–78. https://doi.org/10.1007/s11661-005-0109-0.10.1007/s11661-005-0109-0 ↗
38. Y. Guo, J. Li, D. Lu, S. Deng, G. Zeng, Y. Ma, W. You, Y. Chen, X. Zhang, and R. Zhang: Mater. Charact., 2021, vol. 182, p. 111549. https://doi.org/10.1016/j.matchar.2021.111549.10.1016/j.matchar.2021.111549 ↗
39. A. Rusinek and J.R. Klepaczko: Mater. Des., 2009, vol. 30, pp. 35–48. https://doi.org/10.1016/j.matdes.2008.04.048.10.1016/j.matdes.2008.04.048 ↗
40. S. Raveendra, H. Paranjape, S. Mishra, H. Weiland, R.D. Doherty, and I. Samajdar: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2220–30. https://doi.org/10.1007/s11661-009-9898-x.10.1007/s11661-009-9898-x ↗
41. K. Huang and R.E. Logé: Mater. Des., 2016, vol. 111, pp. 548–74. https://doi.org/10.1016/j.matdes.2016.09.012.10.1016/j.matdes.2016.09.012 ↗
42. I. Samajdar, B. Verlinden, L. Rabet, and P. Van Houtte: Mater. Sci. Eng. A, 1999, vol. 266, pp. 146–54. https://doi.org/10.1016/S0921-5093(99)00022-2.10.1016/S0921-5093(99)00022-2 ↗
43. Y. Wang, G. Zhao, X. Xu, and X. Chen: J. Mater. Process. Technol., 2025, vol. 338, p. 118776. https://doi.org/10.1016/j.jmatprotec.2025.118776.10.1016/j.jmatprotec.2025.118776 ↗
44. Y. Xie, S. Liu, Y. Deng, and X. Guo: Mater. Charact., 2023, vol. 198, p. 112751. https://doi.org/10.1016/j.matchar.2023.112751.10.1016/j.matchar.2023.112751 ↗
45. N. Ott, S.K. Kairy, Y. Yan, and N. Birbilis: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 51–56. https://doi.org/10.1007/s11661-016-3848-1.10.1007/s11661-016-3848-1 ↗
46. N.E. Prasad, A.A. Gokhale, and R.J.H. Wanhill: Aluminum-Lithium Alloys: Processing, Properties, and Applications, Butterworth-Heinemann, Oxford, 2013. https://doi.org/10.1016/B978-0-12-401698-9.00016-1.10.1016/B978-0-12-401698-9.00016-1 ↗
47. R. Fu, Y. Liu, Z. Xiao, Y. Huang, and H. Li: J. Mater. Res. Technol., 2023, vol. 27, pp. 3259–73. https://doi.org/10.1016/j.jmrt.2023.10.134.10.1016/j.jmrt.2023.10.134 ↗
48. A.K. Shukla and W.A. Baeslack: Scripta Mater., 2007, vol. 56, pp. 513–16. https://doi.org/10.1016/j.scriptamat.2006.11.028.10.1016/j.scriptamat.2006.11.028 ↗
49. P. Lv, R. Wang, C. Peng, Z. Cai, Y. Feng, and X. Peng: J. Mater. Res. Technol., 2023, vol. 27, pp. 6159–70. https://doi.org/10.1016/j.jmrt.2023.11.078.10.1016/j.jmrt.2023.11.078 ↗
50. J. Xu, L. Huang, B. Xie, H. Su, and J. Li: J. Mater. Process. Technol., 2022, vol. 303, p. 117516. https://doi.org/10.1016/j.jmatprotec.2022.117516.10.1016/j.jmatprotec.2022.117516 ↗
51. X. Tao, Y. Gao, J. Kang, and Y. Wang: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 410–18. https://doi.org/10.1007/s11661-019-05506-4.10.1007/s11661-019-05506-4 ↗
52. X. Chen, G. Zhao, X. Xu, and Y. Wang: J. Alloys Compd., 2021, vol. 862, p. 158102. https://doi.org/10.1016/j.jallcom.2020.158102.10.1016/j.jallcom.2020.158102 ↗
53. L. Xia, Y. Li, M. Huang, M. Chen, and J. Liu: J. Mater. Sci., 2022, vol. 57, pp. 6372–84. https://doi.org/10.1007/s10853-022-07023-z.10.1007/s10853-022-07023-z ↗
54. Y. Deng, J. Xu, J. Chen, and X. Guo: Mater. Sci. Eng. A., 2020, vol. 795, p. 139975. https://doi.org/10.1016/j.msea.2020.139975.10.1016/j.msea.2020.139975 ↗
55. J. Jiang, H. Wang, M. Tong, F. Jiang, and M. Zhang: Mater. Charact., 2023, vol. 195, p. 112550. https://doi.org/10.1016/j.matchar.2022.112550.10.1016/j.matchar.2022.112550 ↗
56. X. Wang, G. Zhao, L. Sun, Y. Wang, S. Xu, and Z. Lv: Mater. Des., 2023, vol. 234, p. 112366. https://doi.org/10.1016/j.matdes.2023.112366.10.1016/j.matdes.2023.112366 ↗
57. J. Yu, G. Zhao, W. Cui, L. Chen, and X. Chen: J. Manuf. Process., 2019, vol. 38, pp. 502–15. https://doi.org/10.1016/j.jmapro.2019.01.044.10.1016/j.jmapro.2019.01.044 ↗
58. I. Flitta and T. Sheppard: Mater. Sci. Technol., 2013, vol. 19, pp. 837–46. https://doi.org/10.1179/026708303225004422.10.1179/026708303225004422 ↗
59. J. Yu, G. Zhao, and L. Chen: J. Mater. Process. Technol., 2016, vol. 237, pp. 31–47. https://doi.org/10.1016/j.jmatprotec.2016.05.024.10.1016/j.jmatprotec.2016.05.024 ↗
60. J. Zhou, L. Li, and J. Duszczyk: J. Mater. Process. Technol., 2003, vol. 134, pp. 383–97. https://doi.org/10.1016/S0924-0136(02)01128-7.10.1016/S0924-0136(02)01128-7 ↗