journal article·2025-08Open access

Microstructure and Stress Corrosion Cracking Resistance of GMAW-Welded Ultra-High-Strength Steel

Kaue C. Riffel, Lizzy Cefaratti, River C. Lichen, Gabby C. Montiel, Jenifer S. Locke, Antonio J. Ramirez

Abstract

Abstract This work addressed the stress corrosion cracking (SCC) resistance of welded ultra-high-strength steel (UHSS) using gas metal arc welding (GMAW) with ER100 and ER120 filler metals. The microstructure of welds was characterized, and SCC resistance assessed using slow strain rate to compare the percentage of elongation at failure (pct EL) when testing in air and full immersion in 0.6 M NaCl solution. The analysis shows that UHSS base material is susceptible to SCC with a change in pct EL from 5.21 pct in air to 1.94 pct in 0.6 M NaCl. For all welded samples, the strain was localized within the weld metal (WM) due to the lower yield strength condition. All welded samples exhibited lower elongation and brittle fracture when loaded in 0.6 M NaCl compared to air, demonstrating that SCC occurs in welded UHSS with failure observed within the WM. The microstructure presented higher hardness in the ER120 WM, and a microstructure with acicular ferrite, martensite, and bainite was present. In areas that were not utilized for SCC testing, the ER120 material presented a crack in the as-welded condition, and fractography and EBSD maps indicated the presence of transgranular mode with some intergranular branches in cracks present within the as-welded material. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. R.A. Abrahams: Low alloy high performance steel, WO2017027085A2. https://patents.google.com/patent/WO2017027085A2/en?oq=Abrahams+R+(2017)+Low+alloy+steel+performance.+US+Patents+and+Trademark+Office+Patent+WO2017%2f027085A2%2c+2017. Accessed 19 March 2024.
2. V. Sinha, M. Gonzales, and E.J. Payton: Data Brief, 2019, vol. 27, p. 104471. https://doi.org/10.1016/j.dib.2019.104471.10.1016/j.dib.2019.104471 ↗
3. E.M. Hager: Process Parameter Development of Additively Manufactured AF96 Weapons Steel, Air Force Institute of Technology, Ohio, 2019. https://scholar.afit.edu/etd/2220.
4. P. Agrawal, et al.: Adv. Eng. Mater., 2021, vol. 23(1), p. 2000845. https://doi.org/10.1002/adem.202000845.10.1002/adem.202000845 ↗
5. R. Seede, et al.: Addit. Manuf., 2021, vol. 47, p. 102255. https://doi.org/10.1016/j.addma.2021.102255.10.1016/j.addma.2021.102255 ↗
6. R. Seede, et al.: Acta Mater., 2020, vol. 186, pp. 199–214. https://doi.org/10.1016/j.actamat.2019.12.037.10.1016/j.actamat.2019.12.037 ↗
7. A. Cabrilo, K. Geric, M. Jovanovic, and L. Vukic: J. Mater. Eng. Perform., 2018, vol. 27(3), pp. 1281–95. https://doi.org/10.1007/s11665-018-3211-3.10.1007/s11665-018-3211-3 ↗
8. G. Madhusudhan Reddy and T. Mohandas: J. Mater. Process. Technol., 1996, vol. 57(1–2), pp. 23–30. https://doi.org/10.1016/0924-0136(95)02041-1.10.1016/0924-0136(95)02041-1 ↗
9. E.R.S. Souza, R.P. Weber, S.N. Monteiro, and S.D.S. Oliveira: Materials, 2021, vol. 14(19), p. 5789. https://doi.org/10.3390/ma14195789.10.3390/ma14195789 ↗
10. B. Savic and A. Cabrilo: Materials, 2021, vol. 14(13), p. 3617. https://doi.org/10.3390/ma14133617.10.3390/ma14133617 ↗
11. K. Sathish Kumar and N. Arivazhagan: Mater. Today Commun., 2024, vol. 38, p. 108237. https://doi.org/10.1016/j.mtcomm.2024.108237.10.1016/j.mtcomm.2024.108237 ↗
12. G.L. Pioszak and R.P. Gangloff: Metall. Mater. Trans. A, 2017, vol. 48A(9), pp. 4025–45. https://doi.org/10.1007/s11661-017-4156-0.10.1007/s11661-017-4156-0 ↗
13. R.P. Gangloff: in Comprehensive Structural Integrity, vol. 6, I. Milne, R.O. Ritchie, B. Karihaloo, J. Petit, and P. Scott, eds., Elsevier Science, New York, 2003, pp. 31–101.10.1016/B0-08-043749-4/06134-6 ↗
14. K. Hariramabadran Anantha, et al.: Corros. Sci., 2019, vol. 148, pp. 83–93. https://doi.org/10.1016/j.corsci.2018.12.010.10.1016/j.corsci.2018.12.010 ↗
15. Y. Lee and R.P. Gangloff: Metall. Mater. Trans. A, 2007, vol. 38A(13), pp. 2174–90. https://doi.org/10.1007/s11661-006-9051-z.10.1007/s11661-006-9051-z ↗
16. E.M. Hager, et al.: Mater. Sci. Eng. A, 2022, vol. 838, p. 142656. https://doi.org/10.1016/j.msea.2022.142656.10.1016/j.msea.2022.142656 ↗
17. M. Dilmore and J.D. Ruhlman: Eglin steel—a low alloy high strength composition, US7537727B2, 2009. https://patents.google.com/patent/US7537727B2/en. Accessed 19 March 2024.
18. K.C. Riffel, R.H. Gonçalves e Silva, A.J. Ramirez, A.F.F. Acuna, G. Dalpiaz, and M.T.P. Paes: Weld. J., 2024, vol. 103(02), pp. 48–61. https://doi.org/10.29391/2024.103.005.10.29391/2024.103.005 ↗
19. K.C. Riffel, R.H. Gonçalves e Silva, A.J. Ramirez, A.F.F. Acuna, G. Dalpiaz, and M.T.P. Paes: Weld. J., 2024. https://doi.org/10.29391/2024.103.008.10.29391/2024.103.008 ↗
20. Ş Talaş: Mater. Des. 1980–2015, 2010, vol. 31(5), pp. 2649–53. https://doi.org/10.1016/j.matdes.2009.11.066.10.1016/j.matdes.2009.11.066 ↗
21. T. Kasuya and N. Yurioka: Weld. J., 1993, vol. 72, p. 263-s.
22. AWS: Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment, AWS, Doral, 1985.
23. J.C. Dutra, R.H. Gonçalves e Silva, K.C. Riffel, and C. Marques: Weld. World, 2020, vol. 64(6), pp. 999–1009. https://doi.org/10.1007/s40194-020-00889-0.10.1007/s40194-020-00889-0 ↗
24. ASTM: Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking, ASTM International, West Conshohocken, 2021.
25. R.A. Grange, C.R. Hribal, and L.F. Porter: Metall. Trans. A, 1977, vol. 8(11), pp. 1775–85. https://doi.org/10.1007/BF02646882.10.1007/BF02646882 ↗
26. E.C. Bain and H.W. Paxton: Alloying Elements in Steel, 2nd ed. American Society for Metals, Metals Park, 1966.
27. H.K.D.H. Bhadeshia, E. Keehan, L. Karlsson, and H.O. Andren: Trans. Indian Inst. Met., 2006, vol. 59(5), pp. 689–94.
28. P.P.N. Maia, et al.: J. Mater. Res. Technol., 2023, vol. 24, pp. 1716–32. https://doi.org/10.1016/j.jmrt.2023.03.092.10.1016/j.jmrt.2023.03.092 ↗
29. W. Haupt, K.C. Riffel, C.L. Israel, R.H.G. Silva, and A. Reguly: J. Braz. Soc. Mech. Sci. Eng., 2018, vol. 40, pp. 1–11.10.1007/s40430-018-1117-5 ↗
30. A. Chakraborty, R.F. Webster, and S. Primig: J. Mater. Sci., 2022, vol. 57(22), pp. 10359–78. https://doi.org/10.1007/s10853-022-07275-9.10.1007/s10853-022-07275-9 ↗
31. M.W. Vaughan, et al.: Addit. Manuf., 2023, vol. 67, p. 103489. https://doi.org/10.1016/j.addma.2023.103489.10.1016/j.addma.2023.103489 ↗
32. F. Hu, P.D. Hodgson, and K.M. Wu: Mater. Lett., 2014, vol. 122, pp. 240–43. https://doi.org/10.1016/j.matlet.2014.02.051.10.1016/j.matlet.2014.02.051 ↗
33. Q.S. Allen and T.W. Nelson: J. Mater. Process. Technol., 2019, vol. 265, pp. 12–19. https://doi.org/10.1016/j.jmatprotec.2018.09.039.10.1016/j.jmatprotec.2018.09.039 ↗
34. G.K. Padhy, V. Ramasubbu, N. Murugesan, C. Remash, and S.K. Albert: Sci. Technol. Weld. Join., 2012, vol. 17(5), pp. 408–13. https://doi.org/10.1179/1362171812Y.0000000023.10.1179/1362171812Y.0000000023 ↗
35. M.D. Rowe, T.W. Nelson, and J.C. Lippold: Weld. J., 1999, vol. 78, p. 31-s.
36. J. Ćwiek: J. Mater. Process. Technol., 2005, vol. 164–165, pp. 1007–13. https://doi.org/10.1016/j.jmatprotec.2005.02.083.10.1016/j.jmatprotec.2005.02.083 ↗
37. G. Magudeeswaran, V. Balasubramanian, and G. Madhusudhan Reddy: Ironmak. Steelmak., 2008, vol. 35(7), pp. 549–60. https://doi.org/10.1179/174328108X335104.10.1179/174328108X335104 ↗
38. N. Yurioka and H. Suzuki: Int. Mater. Rev., 1990, vol. 35(1), pp. 217–49. https://doi.org/10.1179/imr.1990.35.1.217.10.1179/imr.1990.35.1.217 ↗
39. G.M. Omweg, G.S. Frankel, W.A. Bruce, J.E. Ramirez, and G. Koch: Corrosion, 2003, vol. 59(7), pp. 640–53. https://doi.org/10.5006/1.3277595.10.5006/1.3277595 ↗
40. J.C. Lippold: Welding Metallurgy and Weldability, Wiley, Hoboken, 2015.10.1002/9781118960332 ↗
41. K. Tomoaki, S. Ichiro, and T. Okazaki: Presented at the CORROSION, Houston, Texas, March 2011.
42. M. Dalal and J. Penso: Operations, Applications, and Components; Seismic Engineering; ASME Nondestructive Evaluation, Diagnosis and Prognosis (NDPD) Division, vol. 5, American Society of Mechanical Engineers, Las Vegas, 2022, p. V005T07A011. https://doi.org/10.1115/PVP2022-85406.10.1115/PVP2022-85406 ↗
43. C. Augustine, T. Pickle, Y. Hong, J. Vidal, and Z. Yu: Stress Relaxation Cracking of Alloys at Temperatures Higher Than 540 °C, NREL/TP-5700-80404, 2283656, Main ID 42607, 2024. https://doi.org/10.2172/2283656.10.2172/2283656 ↗
44. A. Gotoh: Weld. Int., 1993, vol. 7(4), pp. 266–68. https://doi.org/10.1080/09507119309548387.10.1080/09507119309548387 ↗
45. J.C. Lippold: in Cracking Phenomena in Welds IV. T. Boellinghaus, J.C. Lippold, and C.E. Cross, eds., Springer, Cham, 2016, pp. 229–65. https://doi.org/10.1007/978-3-319-28434-7_12.10.1007/978-3-319-28434-7_12 ↗
46. C.F. Meitzner and A.W. Pense: Weld. J., 1969, vol. 48(10), pp. 431s–40s.
47. H. Nakamura, T. Naiki, and H. Okabayashi: Trans. Jpn Weld. Soc., 1970, vol. 1(2), pp. 60–71.
48. P. Nevasmaa and J. Salonen: Weld. World, 2008, vol. 52(3–4), pp. 68–78. https://doi.org/10.1007/BF03266633.10.1007/BF03266633 ↗
49. V. Sinha, M. Gonzales, R.A. Abrahams, B.S. Song, and E.J. Payton: Mater. Charact., 2020, vol. 159, p. 109835. https://doi.org/10.1016/j.matchar.2019.109835.10.1016/j.matchar.2019.109835 ↗
50. V. Sinha, E.J. Payton, M. Gonzales, R.A. Abrahams, and B.S. Song: Metallogr. Microstruct. Anal., 2017, vol. 6(6), pp. 610–18. https://doi.org/10.1007/s13632-017-0403-4.10.1007/s13632-017-0403-4 ↗