Unveiling the Mechanism of Cyclic Indentation in a Fe–Mn–Al–C Alloy
Source abstract
Abstract
Abstract This study explores the cyclic elastoplastic deformation behavior of an Fe–Mn–Al–C alloy at room temperature by employing load-controlled nanoindentation with a Berkovich indenter, offering new insights into the competition between plastic and elastic energy. The dynamic nanoindentation tests were conducted with load ratios $$\left(R= {P}_\text{min}/{P}_\text{max}\right)$$ ranging from 0 to 0.5 for 100 and 200 mN, considering 50, 300 and 500 loading cycles. Results revealed that at the maximum depth, the elastic (E e) and plastic (E p) energy remains constant, whereas the ability to absorb E p decreases by approximately 1.4 and the E e decreases by approximately 1.5 when R varies from 0 to 0.5. Additionally, the relationship between E e and E p is ~ 2 times regardless of the load or number of load cycles. The occurrence of pop-ins at low loads suggests potential interactions between dislocations and twins, given the austenitic nature of the alloy with a low stacking fault energy (SFE). Creep behavior was analyzed at loads ranging from 1 to 10 mN with a holding time of 30 seconds. The creep rate increases with increasing load and holding time, suggesting that at the macroscopic scale, the strain rate affects the strain hardening rate.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. J.A. Castañeda, O.A. Zambrano, G.A. Alcázar, S.A. Rodríguez, and J.J. Coronado: Metals, 2021, vol. 11, p. 1701.10.3390/met11111701 ↗
2. S. Kim, D. Jeong, and H. Sung: Met. Mater. Int., 2018, vol. 24, pp. 1–14.10.1007/s12540-017-7459-1 ↗
3. P.C. Guo, S. Liu, P.H. Ma, J.Y. Meng, F.C. Zhang, and L.H. Qian: in Materials Science Forum. Trans Tech Publications Ltd., Switzerland, 2017, pp. 1524–28.10.4028/www.scientific.net/MSF.879.1524 ↗
4. B. He and X. Shang: Philos. Mag. Lett., 2021, vol. 101, pp. 417–31.10.1080/09500839.2021.1936258 ↗
5. B.-S. Lou, Y.-Y. Chen, Z.-Y. Wu, Y.-C. Kuo, J.-G. Duh, and J.-W. Lee: J. Mater. Res. Technol., 2022, vol. 20, pp. 1524–32.10.1016/j.jmrt.2022.07.179 ↗
6. S.C. Schwarm, R.P. Kolli, E. Aydogan, S. Mburu, and S. Ankem: Mater. Sci. Eng. A, 2017, vol. 680, pp. 359–67.10.1016/j.msea.2016.10.116 ↗
7. R. Misra, Z. Zhang, Z. Jia, P.V. Surya, M. Somani, and L. Karjalainen: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6958–63.10.1016/j.msea.2011.05.068 ↗
8. R. Hossain, F. Pahlevani, M.Z. Quadir, and V. Sahajwalla: Sci. Rep., 2016, vol. 6, pp. 1–11.10.1038/s41598-016-0001-8 ↗
9. P. Cavaliere: Procedia Eng., 2010, vol. 2, pp. 213–22.10.1016/j.proeng.2010.03.023 ↗
10. Y.-Y. Cui, Y.-F. Jia, and F.-Z. Xuan: Sci. Rep., 2018, vol. 8, pp. 1–10.
11. F. Yang, L. Peng, and K. Okazaki: J. Mater. Sci., 2007, vol. 42, pp. 4513–20.10.1007/s10853-006-0480-2 ↗
12. M. Haghshenas: Mater. Sci. Eng. A, 2017, vol. 697, pp. 8–16.10.1016/j.msea.2017.05.004 ↗
13. J. Roa, I. Sapezanskaia, G. Fargas, R. Kouitat, A. Redjaïmia, and A. Mateo: Metall. Mater. Trans. A, 2018, vol. 49, pp. 6034–39.10.1007/s11661-018-4911-x ↗
14. D. Ekmekci and Ö.N. Cora: Appl. Phys. A, 2020, vol. 126, pp. 1–10.10.1007/s00339-020-04095-z ↗
15. I.-C. Choi, B.-G. Yoo, Y.-J. Kim, and J.-I. Jang: J. Mater. Res., 2012, vol. 27, pp. 3–11.10.1557/jmr.2011.213 ↗
16. D. Peykov, E. Martin, R.R. Chromik, R. Gauvin, and M. Trudeau: J. Mater. Sci., 2012, vol. 47, pp. 7189–7200.10.1007/s10853-012-6665-y ↗
17. A. Elmustafa and D. Stone: J. Mech. Phys. Solids, 2003, vol. 51, pp. 357–81.10.1016/S0022-5096(02)00033-9 ↗
18. Y. Hong, C. Zhou, Y. Zheng, L. Zhang, J. Zheng, and X. Chen: Int. J. Hydrogen Energy, 2019, vol. 44, pp. 1253–62.10.1016/j.ijhydene.2018.11.017 ↗
19. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–68.10.4028/www.scientific.net/SSP.160.63 ↗
20. O.A. Zambrano, J.J. Coronado, and S.A. Rodríguez: Surf. Coat. Technol., 2015, vol. 282, pp. 155–62.10.1016/j.surfcoat.2015.10.028 ↗
21. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
22. P. Šittner, L. Heller, J. Pilch, C. Curfs, T. Alonso, and D. Favier: J. Mater. Eng. Perform., 2014, vol. 23, pp. 2303–14.10.1007/s11665-014-0976-x ↗
23. S. Tekumalla, B. Selvarajou, S. Raman, S. Gao, and M. Seita: Mater. Sci. Eng. A, 2022, vol. 833, p. 142493.10.1016/j.msea.2021.142493 ↗
24. M. Kang, Y.-M. Kim, H.N. Han, and C. Kim: Metals, 2017, vol. 7, p. 523.10.3390/met7120523 ↗
25. O.A. Zambrano, G. Tressia, and R.M. Souza: Eng. Fail. Anal., 2020, vol. 30(10), p. 104621.10.1016/j.engfailanal.2020.104621 ↗
26. O.A. Zambrano: J. Eng. Mater. Technol., 2016, vol. 138, p. 041010.10.1115/1.4033632 ↗
27. N. Chaudhary, A. Abu-Odeh, I. Karaman, and R. Arróyave: J. Mater. Sci., 2017, vol. 52, pp. 11048–76.10.1007/s10853-017-1252-x ↗
28. Y. Shen, N. Jia, R. Misra, and L. Zuo: Acta Mater., 2016, vol. 103, pp. 229–42.10.1016/j.actamat.2015.09.061 ↗
29. G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438–46.10.2355/isijinternational.43.438 ↗
30. O.A. Zambrano, J. Gómez, J. Coronado, and S. Rodríguez: Wear, 2019, vol. 418, pp. 201–07.10.1016/j.wear.2018.12.002 ↗
31. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627–33.10.1002/srin.200606440 ↗
32. A. Hamada, A. Kisko, P. Sahu, and L. Karjalainen: Mater. Sci. Eng. A, 2015, vol. 628, pp. 154–59.10.1016/j.msea.2015.01.042 ↗
33. V. Shterner, I.B. Timokhina, and H. Beladi: Mater. Sci. Eng. A, 2016, vol. 669, pp. 437–46.10.1016/j.msea.2016.05.104 ↗
34. O. Zambrano: J. Mater. Sci., 2018, vol. 53, pp. 14003–62.10.1007/s10853-018-2551-6 ↗
35. C. Wang, C. Sun, L. Qian, W. Cai, J. Jiang, and Y. Xiao: Mater. Sci. Technol., 2021, vol. 37, pp. 280–91.10.1080/02670836.2021.1885580 ↗
36. H. Ding, D. Han, Z. Cai, and Z. Wu: JOM, 2014, vol. 66, pp. 1821–27.10.1007/s11837-014-1063-3 ↗
37. G. Kang, N. Ohno, and A. Nebu: Int. J. Plast., 2003, vol. 19, pp. 1801–19.10.1016/S0749-6419(03)00016-0 ↗
38. T. Ohmura, T. Hara, and K. Tsuzaki: J. Mater. Res., 2003, vol. 18, pp. 1465–70.10.1557/JMR.2003.0201 ↗
39. F. Yan, B. Zhang, H. Wang, N. Tao, and K. Lu: Scripta Mater., 2016, vol. 112, pp. 19–22.10.1016/j.scriptamat.2015.08.034 ↗
40. O.A. Zambrano, J. Valdés, Y. Aguilar, J. Coronado, S. Rodríguez, and R.E. Logé: Mater. Sci. Eng. A, 2017, vol. 689, pp. 269–85.10.1016/j.msea.2017.02.060 ↗
41. N. Kikuchi, M. Kitagawa, A. Sato, E. Kusano, H. Nanto, and A. Kinbara: Surf. Coat. Technol., 2000, vol. 126, pp. 131–35.10.1016/S0257-8972(99)00670-2 ↗
42. J. Kacher and I. Robertson: Acta Mater., 2012, vol. 60, pp. 6657–72.10.1016/j.actamat.2012.08.036 ↗
43. H. Bückle: Metall. Rev., 1959, vol. 4, pp. 49–100.
44. M. Ashby: Philos. Mag., 1970, vol. 21, pp. 399–424.10.1080/14786437008238426 ↗
45. G.Z. Voyiadjis and M. Yaghoobi: Crystals, 2017, vol. 7, p. 321.10.3390/cryst7100321 ↗
46. A. Bolshakov, W. Oliver, and G. Pharr: MRS Online Proc. Libr. (OPL), 1996, vol. 436, p. 141.10.1557/PROC-436-141 ↗
47. M. Bayerlein, H.-J. Christ, and H. Mughrabi: Mater. Sci. Eng. A, 1989, vol. 114, pp. L11-16.10.1016/0921-5093(89)90871-X ↗
48. G.S. Raman and K. Padmanabhan: Mater. Sci. Technol., 1994, vol. 10, pp. 614–20.10.1179/mst.1994.10.7.614 ↗
49. H. Zheng, J. Rao, J. Pfetzing, J. Frenzel, C. Somsen, and G. Eggeler: Scripta Mater., 2008, vol. 58, pp. 743–46.10.1016/j.scriptamat.2007.12.012 ↗
50. Z. Li, J. Zhang, Y. Zhai, J. Zhang, X. Wang, Z. Zhang, S. Mao, and X. Han: Mater. Res. Lett., 2022, vol. 10, pp. 539–46.10.1080/21663831.2022.2065892 ↗
51. D. Tabor: The Hardness of Metals, Oxford University Press, Oxford, 2000.10.1093/oso/9780198507765.001.0001 ↗
52. S. Shim, H. Bei, E.P. George, and G.M. Pharr: Scripta Mater., 2008, vol. 59, pp. 1095–98.10.1016/j.scriptamat.2008.07.026 ↗
53. K.L. Johnson and K.L. Johnson: Contact Mechanics, Cambridge University Press, Cambridge, 1987.
54. A.C. Fischer-Cripps: Nanoindentation, Springer, 2011, pp 213–33.10.1007/978-1-4419-9872-9_12 ↗
55. R. Wagner, R. Lehnert, E. Storti, L. Ditscherlein, C. Schröder, S. Dudczig, U.A. Peuker, O. Volkova, C.G. Aneziris, and H. Biermann: Mater Charact, 2022, vol. 193, p. 112257.10.1016/j.matchar.2022.112257 ↗
56. F. Lani, Q. Furnémont, T. Van Rompaey, F. Delannay, P. Jacques, and T. Pardoen: Acta Mater., 2007, vol. 55, pp. 3695–3705.10.1016/j.actamat.2007.02.015 ↗
57. A. Gouldstone, H.-J. Koh, K.-Y. Zeng, A. Giannakopoulos, and S. Suresh: Acta Mater., 2000, vol. 48, pp. 2277–95.10.1016/S1359-6454(00)00009-4 ↗
58. B. He, M. Huang, Z. Liang, A. Ngan, H. Luo, J. Shi, W. Cao, and H. Dong: Scripta Mater., 2013, vol. 69, pp. 215–18.10.1016/j.scriptamat.2013.03.030 ↗
59. X. Shang, S. Pan, Q. Guan, and B. He: Met. Mater. Int., 2022, vol. 28, pp. 2874–83.10.1007/s12540-022-01180-1 ↗
60. A. Barnoush: Acta Mater., 2012, vol. 60, pp. 1268–77.10.1016/j.actamat.2011.11.034 ↗
61. D.F. Bahr, D. Kramer, and W. Gerberich: Acta Mater., 1998, vol. 46, pp. 3605–17.10.1016/S1359-6454(98)00024-X ↗
62. S. Sinha, R. Mirshams, T. Wang, S. Nene, M. Frank, K. Liu, and R. Mishra: Sci. Rep., 2019, vol. 9, p. 6639.10.1038/s41598-019-43174-x ↗
63. Y. Shibutani, T. Tsuru, and A. Koyama: Acta Mater., 2007, vol. 55, pp. 1813–22.10.1016/j.actamat.2006.10.055 ↗
64. A. Oila and S. Bull: Comput. Mater. Sci., 2009, vol. 45, pp. 235–39.10.1016/j.commatsci.2008.09.013 ↗
65. R. Misra, Z. Zhang, Z. Jia, M. Somani, and L. Karjalainen: Scripta Mater., 2010, vol. 63, pp. 1057–60.10.1016/j.scriptamat.2010.07.041 ↗
66. M.E. Kassner: Fundamentals of Creep in Metals and Alloys, Butterworth-Heinemann, 2015.10.1016/B978-0-08-099427-7.00001-3 ↗
67. Z. Shi, C. Wei, S. Zhang, W. Wang, H. Zhang, Y. Wu, and M. Ma: J. Non-Cryst. Solids, 2023, vol. 603, p. 122132.10.1016/j.jnoncrysol.2023.122132 ↗
68. L. Meng, W. Cui, B. Su, X. Shu, and G. Xiao: Acta Mech. Solida Sin., 2023, vol. 36, pp. 55–64.10.1007/s10338-022-00354-z ↗
69. B. Lucas and W. Oliver: Metall. Mater. Trans. A, 1999, vol. 30, pp. 601–10.10.1007/s11661-999-0051-7 ↗
70. L. Shen, W.C.D. Cheong, Y.L. Foo, and Z. Chen: Mater. Sci. Eng. A, 2012, vol. 532, pp. 505–10.10.1016/j.msea.2011.11.016 ↗
71. Q. Jia, H. Zhang, Y. Wang, S. Liu, S. Hao, L. Chen, X. Ma, Z. Zou, and M. Jin: Mater Charact, 2021, vol. 179, p. 111367.10.1016/j.matchar.2021.111367 ↗
72. J.K. Kim, L. Chen, H.S. Kim, S.K. Kim, G.S. Kim, Y. Estrin, and B. De Cooman: Steel Res. Int., 2009, vol. 80, pp. 493–98.
73. F. Wang, P. Huang, and K. Xu: Appl. Phys. Lett., 2007, vol. 90.10.1063/1.2435356 ↗
74. K. Li, V. Injeti, R. Misra, Z. Cai, and H. Ding: Mater. Sci. Eng. A, 2018, vol. 711, pp. 515–23.10.1016/j.msea.2017.11.055 ↗