The Use of DSC and Independent Oxygen Analyses to Correlate the β Transus Temperature in CP-Ti Grade 2 Materials Processed via Different Techniques
Source abstract
Abstract
Abstract Detecting oxygen content in commercially pure titanium (CP-Ti) is essential, especially in additive manufacturing processes where contamination is problematic. Traditional analyses are expensive and require significant amounts of material. In titanium, oxygen content corresponds to increasing β transus temperatures. Differential scanning calorimetry (DSC) was used on titanium materials to determine β transus temperatures, which were confirmed by independent oxygen analyses, and used in CALPHAD modeling. Analysis suggested DSC could be a less expensive method of determining oxygen content in CP-Ti.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. G. Lutjering and J.C. Williams: Titanium, Springer, Berlin, 2007.
2. American Society for Testing Materials: ASTM B348/B348M-19: Standard Specification for Titanium and Titanium Alloy Bars and Billets, ASTM, West Conshohocken, 2019.
3. ASTM International: B265–20a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate, ASTM International, West Conshohocken, 2020.
4. H. Conrad: Prog. Mater. Sci., 1981, vol. 26, pp. 123–403.10.1016/0079-6425(81)90001-3 ↗
5. M. Oh, J.Y. Lee, and K. Park: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3071–77.10.1007/s11661-004-0052-5 ↗
6. S. Andersson, B. Collen, U. Kuylenstierna, and A. Magneli: Acta Chem. Scand., 1957, vol. 11, pp. 1641–52.10.3891/acta.chem.scand.11-1641 ↗
7. G. Welsch and W. Bunk: Metall. Trans. A, 1982, vol. 13A, pp. 889–99.10.1007/BF02642403 ↗
8. Q. Yu, L. Qi, R. Tsuru, D. Traylor, D. Rugg, M. Morris, D. Asta, C. Chrzan, and A.M. Minor: Science, 2015, vol. 347(6222), p. 635.10.1126/science.1260485 ↗
9. X. Li, J. Xie, and Y. Zhou: J. Mater. Sci., 2005, vol. 40(13), pp. 3437–43.10.1007/s10853-005-0447-8 ↗
10. D.J. Simbi and J.C. Scully: Mater. Lett., 1996, vol. 26(1–2), pp. 35–39.10.1016/0167-577X(95)00204-9 ↗
11. D.D. Harwig, C. Fountain, W. Ittiwattana, and H. Castner: Weld. J., 2000, vol. 79, p. 305.
12. C.E. Cross, B.R. Krueger, M.W. Davis, T.J. Dorsch, J. Lawmon, and J.N. Richardson: AWS Weld. Handb., 2015, vol. 6, pp. 385–448.
13. C. Ouchi, H. Iizumi, and S. Mitao: Mater. Sci. Eng. A, 1998, vol. 243, pp. 186–95.10.1016/S0921-5093(97)00799-5 ↗
14. SAE International: AMS2801: Heat Treatment of Titanium Alloy Parts, SAE International, Warrendale.
15. S. Malinov, Z. Guo, W. Sha, and A. Wilson: Metall. Mater. Trans. A, 2001, vol. 32A(4), pp. 879–87.10.1007/s11661-001-0345-x ↗
16. D.V. Gadeev and A.G. Illarionov: Solid State Phenom. , 2018, vol. 284, pp. 259–64.10.4028/www.scientific.net/SSP.284.259 ↗
17. W. Sha and Z. Guo: J. Alloys Compd., 1990, vol. 175, p. 290.
18. M.T. Tsai, W. Chen, Y. Chao, J.S. Jang, C. Tsai, Y.L. Su and C.N. Kuo: J. Alloys Compd., 2020.
19. M.A. Whitney: Dissertation, University of Waterloo.
20. K. Hajizadeh, S. GhobadiAlamdari, and B. Eghbali: Physica B, 2013, vol. 417, pp. 33–38.10.1016/j.physb.2013.02.031 ↗
21. M. Kottman, S. Zhang, J. McGuffin-Cawley, and B. Narayanan: JOM, 2015, vol. 67(3), pp. 622–28.10.1007/s11837-014-1288-1 ↗
22. S. Pangsrivinij: Dissertation, Case Western Reserve University, 2016.
23. Z. Nie, G. Wang, J.D. McGuffin-Cawley, B. Narayanan, S. Zhang, D. Schwam, M. Kottman, and Y. Rong: J. Mater. Process. Technol., 2016, vol. 235, pp. 171–86.10.1016/j.jmatprotec.2016.04.006 ↗
24. ASTM International: E1409-13 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion, ASTM International, West Conshohocken.