Role of Detwinning on Macroscopic Strain Localization in Magnesium Alloy
Source abstract
Abstract
Abstract In magnesium alloys, detwinning typically refers to the phenomenon in which the {$$10\overline{1 }2$$} twins revert to their original orientation before twinning occurs. This study revealed the correlation between detwinning and macroscopic strain-localized banding in AZ31 (Mg-3Al-1Zn-0.3Mn, wt pct) Mg alloy and explored the origin of this correlation. Using digital image correlation (DIC) and in situ X-ray diffraction analysis, a collective detwinning phenomenon occurring alongside macroscopic strain-localized bands was observed. These strain-localized bands formed and propagated repetitively in the gauge part of the specimen during tensile deformation. The heterogeneous deformation was prominent in the yield plateau region of the stress–strain curve, where intensive detwinning was observed. Quantitative assessment of the local strain performed using correlative electron backscatter diffraction–DIC analysis revealed that the detwinning shear significantly contributes to macroscopic strain localization; however, detwinning alone cannot account for the observed strain localization. This study demonstrated that detwinning occurs collectively, inducing the formation and propagation of macroscopic strain-localized bands during tensile deformation. Graphical Abstract
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. W.J. Joost: JOM, 2012, vol. 64, pp. 1032–38. https://doi.org/10.1007/s11837-012-0424-z.10.1007/s11837-012-0424-z ↗
2. F. Cuenot: Energ. Policy, 2009, vol. 37, pp. 3832–42. https://doi.org/10.1016/j.enpol.2009.07.036.10.1016/j.enpol.2009.07.036 ↗
3. R. Huang, M. Riddle, D. Graziano, J. Warren, S. Das, S. Nimbalkar, J. Cresko, and E. Masanet: J. Clean. Prod., 2016, vol. 135, pp. 1559–70. https://doi.org/10.1016/j.jclepro.2015.04.109.10.1016/j.jclepro.2015.04.109 ↗
4. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45. https://doi.org/10.1016/S0921-5093(00)01351-4.10.1016/S0921-5093(00)01351-4 ↗
5. T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A, 2008, vol. 488, pp. 406–14. https://doi.org/10.1016/j.msea.2007.11.056.10.1016/j.msea.2007.11.056 ↗
6. K.F. Zhang, D.L. Yin, and D.Z. Wu: Int. J. Mach. Tools Manuf, 2006, vol. 46, pp. 1276–80. https://doi.org/10.1016/j.ijmachtools.2006.01.014.10.1016/j.ijmachtools.2006.01.014 ↗
7. K. Iwanaga, H. Tashiro, H. Okamoto, and K. Shimizu: J. Mater. Process. Technol., 2004, vol. 155–156, pp. 1313–16. https://doi.org/10.1016/j.jmatprotec.2004.04.181.10.1016/j.jmatprotec.2004.04.181 ↗
8. R.E. Reed-Hill and R. Abbaschian: Physical Metallurgy Principles, 3rd ed. PWS-Kent, Boston, 1994.
9. C.S. Roberts: Magnesium and Its Alloys, Wiley, New York, 1960.
10. P.G. Partridge and E. Roberts: Acta Metall., 1964, vol. 12, pp. 1205–10. https://doi.org/10.1016/0001-6160(64)90103-8.10.1016/0001-6160(64)90103-8 ↗
11. L. Jiang, J.J. Jonas, A.A. Luo, A.K. Sachdev, and S. Godet: Mater. Sci. Eng. A, 2007, vol. 445–446, pp. 302–309. https://doi.org/10.1016/j.msea.2006.09.069.10.1016/j.msea.2006.09.069 ↗
12. S.-G. Hong, S.H. Park, and C.S. Lee: J. Mater. Res., 2010, vol. 25, pp. 784–92. https://doi.org/10.1557/JMR.2010.0094.10.1557/JMR.2010.0094 ↗
13. E.O. Hall: Yield Point Phenomena in Metals and Alloys, Plenum Press, New York, 1970.10.1007/978-1-4684-1860-6 ↗
14. S. Gao, Y. Bai, R. Zheng, Y. Tian, W. Mao, A. Shibata, and N. Tsuji: Scripta Mater., 2019, vol. 159, pp. 28–32. https://doi.org/10.1016/j.scriptamat.2018.09.007.10.1016/j.scriptamat.2018.09.007 ↗
15. J.W. Wyrzykowski and M.W. Grabski: Mater. Sci. Eng., 1982, vol. 56, pp. 197–200. https://doi.org/10.1016/0025-5416(82)90173-2.10.1016/0025-5416(82)90173-2 ↗
16. P. Sittner, Y. Liu, and V. Novak: J. Mech. Phys. Solids, 2005, vol. 53, pp. 1719–46. https://doi.org/10.1016/j.jmps.2005.03.005.10.1016/j.jmps.2005.03.005 ↗
17. M.R. Barnett, M.D. Nave, and A. Ghaderi: Acta Mater., 2012, vol. 60, pp. 1433–43. https://doi.org/10.1016/j.actamat.2011.11.022.10.1016/j.actamat.2011.11.022 ↗
18. K. Anten and B. Scholtes: Mater. Sci. Eng. A, 2019, vol. 746, pp. 217–28. https://doi.org/10.1016/j.msea.2019.01.033.10.1016/j.msea.2019.01.033 ↗
19. J. Go, M.-H. Park, S. Gao, and N. Tsuji: Scripta Mater., 2024, vol. 250, 116207. https://doi.org/10.1016/j.scriptamat.2024.116207.10.1016/j.scriptamat.2024.116207 ↗
20. S.-G. Hong, S.H. Park, and C.S. Lee: Acta Mater., 2010, vol. 58, pp. 5873–885. https://doi.org/10.1016/j.actamat.2010.07.002.10.1016/j.actamat.2010.07.002 ↗
21. F. Wang and S.R. Agnew: Int. J. Plast., 2016, vol. 81, pp. 63–86. https://doi.org/10.1016/j.ijplas.2016.01.012.10.1016/j.ijplas.2016.01.012 ↗
22. J. Go, M.-H. Park, S. Gao, H. Matsumiya, W. Gong, and N. Tsuji: J. Alloys Compd., 2025, vol. 1014, 178749. https://doi.org/10.1016/j.jallcom.2025.178749.10.1016/j.jallcom.2025.178749 ↗
23. H. Yu, Y. Xin, H. Zhou, R. Hong, L. Zhao, and Q. Liu: Mater. Sci. Eng. A, 2014, vol. 617, pp. 24–30. https://doi.org/10.1016/j.msea.2014.08.034.10.1016/j.msea.2014.08.034 ↗
24. L. Wu, S.R. Agnew, D.W. Brown, G.M. Stoica, B. Clausen, A. Jain, D.E. Fielden, and P.K. Liaw: Acta Mater., 2008, vol. 56, pp. 3699–707. https://doi.org/10.1016/j.actamat.2008.04.006.10.1016/j.actamat.2008.04.006 ↗
25. R. Schwab and V. Ruff: Acta Mater., 2013, vol. 61, pp. 1798–808. https://doi.org/10.1016/j.actamat.2012.12.003.10.1016/j.actamat.2012.12.003 ↗
26. S. Yako, M. Park, and N. Tsuji: Scripta Mater., 2025, vol. 255, 116388. https://doi.org/10.1016/j.scriptamat.2024.116388.10.1016/j.scriptamat.2024.116388 ↗
27. A. van den Beukel: Phys. Status Solidi, 1975, vol. 30, pp. 197–206. https://doi.org/10.1002/pssa.2210300120.10.1002/pssa.2210300120 ↗
28. D. Caillard: Acta Mater., 2016, vol. 112, pp. 273–84. https://doi.org/10.1016/j.actamat.2016.04.018.10.1016/j.actamat.2016.04.018 ↗
29. S.J. Lee, J. Kim, S.N. Kane, and B.C. De Cooman: Acta Mater., 2011, vol. 59, pp. 6809–19. https://doi.org/10.1016/j.actamat.2011.07.040.10.1016/j.actamat.2011.07.040 ↗
30. A. Yilmaz: Sci. Technol. Adv. Mater., 2011, vol. 12, 063001. https://doi.org/10.1088/1468-6996/12/6/063001.10.1088/1468-6996/12/6/063001 ↗
31. S. Hwang, M.-H. Park, Y. Bai, A. Shibata, W. Mao, H. Adachi, M. Sato, and N. Tsuji: Acta Mater., 2021, vol. 205, 116543. https://doi.org/10.1016/j.actamat.2020.116543.10.1016/j.actamat.2020.116543 ↗