journal article·2025-09Open access

Investigation of Aluminum Electrospark Alloyed Coatings on Steels

Oksana Haponova, Viacheslav Tarelnyk, Nataliia Tarelnyk, Gennadii Laponog

Abstract

Abstract The paper presents a study of the structure-phase state of aluminised coatings obtained by the electrospark alloying (ESA) method. The influence of the discharge energy and the productivity of the treatment process on the thickness of the hardened layer, its microhardness, continuity and surface roughness of C20 and C40 steels has been studied. It is shown that the structure of ESA coatings consists of a white layer, a diffusion zone and a substrate metal. Increasing the discharge energy during ESA leads to a change in the chemical and phase composition of the layer. With a 2-fold decrease in ESA productivity, the thickness of the “white” layer increases to 75 to 110 µm, its microhardness to 7450 MPa; the continuity of the coating tends to 100 pct. With a 4-fold decrease in ESA productivity, the thickness of the ‘white’ layer also increases, but not intensively, to 60 µm at W p = 4.6 J and then does not change; at the same time, the surface roughness Ra increases to 8.1 to 9.0 µm and the continuity is 95 pct. A 4-fold decrease in process productivity contributes to the deterioration of coating quality parameters and an increase in roughness. The study of the influence of the energy parameters of ESA, as well as the alloying time (‘productivity’) of the process, is important for the improvement of hardening technology. The paper proposes a mathematical model for predicting the coating parameters taking into account the processing time of a given plane to be alloyed, i.e., the labour intensity of the ESA process (the value of the inverse productivity). The equations of the mathematical model and methods for determining the constants of the equations for predicting the parameters of the alloyed layer have been obtained. An algorithm has been developed and the adequacy of the mathematical model has been verified, which allows the prediction of the main technological parameters of ESA in order to obtain a coating with the specified quality indicators.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Coatings · Engineering Technology and Methodologies · Advanced Theoretical and Applied Studies in Material Sciences and Geometry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. M. Juhl, M.Z. Hauschild, and K. Dam-Johansen: Prog. Org. Coat., 2024, vol. 197, 108781https://doi.org/10.1016/j.porgcoat.2024.108781.10.1016/j.porgcoat.2024.108781 ↗
2. R. Nartita, D. Ionita, and I. Demetrescu: Sustainability, 2021, vol. 13, p. 10217. https://doi.org/10.3390/su131810217.10.3390/su131810217 ↗
3. J. Krmela, T. Hovorun, K. Berladir, and A. Artyukhov: Manuf. Technol., 2021, vol. 21(2), pp. 206–12. https://doi.org/10.21062/mft.2021.034.10.21062/mft.2021.034 ↗
4. Y. Ju, I. Konoplianchenko, J. Pu, Z. Zhang, Q. Dong, and M. Dumanchuk: Results Eng., 2024, vol. 21, p. 101985. https://doi.org/10.1016/j.rineng.2024.101985.10.1016/j.rineng.2024.101985 ↗
5. D.B. Hlushkova, V.M. Volchuk, P.M. Polyansky, V.A. Saenko, and A.A. Efimenko: Funct. Mater., 2023, vol. 30(2), pp. 275–81. https://doi.org/10.15407/fm30.02.275.10.15407/fm30.02.275 ↗
6. Y. Liu, S. Zhang, W. Shao, Z. Wang, J. Qu, W. Zhou, and S. Zhang: Coatings, 2025, vol. 15, p. 88. https://doi.org/10.3390/coatings15010088.10.3390/coatings15010088 ↗
7. Y.X. Ou, H.Q. Wang, X. Ouyang, Y.Y. Zhao, Q. Zhou, C.W. Luo, Q.S. Hua, X.P. Ouyang, and S. Zhang: Prog. Mater. Sci., 2023, vol. 136, 101125https://doi.org/10.1016/j.pmatsci.2023.101125.10.1016/j.pmatsci.2023.101125 ↗
8. B. Fotovvati, N. Namdari, and A. Dehghanghadikolaei: J. Manuf. Mater. Process., 2019, vol. 3, p. 28. https://doi.org/10.3390/jmmp3010028.10.3390/jmmp3010028 ↗
9. O.P. Gaponova, B. Antoszewski, V.B. Tarelnyk, P. Kurp, O.M. Myslyvchenko, and N.V. Tarelnyk: Materials, 2021, vol. 14, p. 6332. https://doi.org/10.3390/ma14216332.10.3390/ma14216332 ↗
10. V.B. Tarel’nik, V.S. Martsinkovskii, and A.N. Zhukov: Chem. Pet. Eng., 2017, vol. 53, pp. 385–89. https://doi.org/10.1007/s10556-017-0351-5.10.1007/s10556-017-0351-5 ↗
11. O. Umanskyi, M. Storozhenko, V. Tarelnyk, O. Koval, Yu. Gubin, N. Tarelnyk, and T.V. Kurinna: Powder Metall. Met. Ceram., 2020, vol. 59, pp. 57–67. https://doi.org/10.1007/s11106-020-00138-5.10.1007/s11106-020-00138-5 ↗
12. V.B. Tarelnyk, O.P. Gaponova, V.B. Loboda, E.V. Konoplyanchenko, V.S. Martsinkovskii, Y.I. Semirnenko, N.V. Tarelnyk, M.A. Mikulina, and B.A. Sarzhanov: Surf. Eng. Appl. Electrochem., 2021, vol. 57, pp. 173–84. https://doi.org/10.3103/S1068375521020113.10.3103/S1068375521020113 ↗
13. E.A. Esfahani, H. Salimijazi, M.A. Golozar, J. Mostaghimi, and L. Pershin: J. Therm. Spray Technol., 2012, vol. 21, pp. 1195–202. https://doi.org/10.1007/s11666-012-9810-x8.10.1007/s11666-012-9810-x8 ↗
14. T. Chmielewski, P. Siwek, M. Chmielewski, A. Piątkowska, A. Grabias, and D. Golański: Metals, 2018, vol. 8, p. 1059. https://doi.org/10.3390/met8121059.10.3390/met8121059 ↗
15. N.V. Bangaru and R.C. Krutenat: J. Vac. Sci. Technol., 1984, vol. 2, pp. 806–15. https://doi.org/10.1116/1.582882.10.1116/1.582882 ↗
16. K. Kostyk, M. Hatala, V. Kostyk, V. Ivanov, I. Pavlenko, and D. Duplakova: Processes, 2021, vol. 9, p. 698. https://doi.org/10.3390/pr9040698.10.3390/pr9040698 ↗
17. A.D. Pogrebnjak, V.I. Ivashchenko, P.L. Skrynskyy, O.V. Bondar, P. Konarski, K. Zaleski, S. Jurga, and E. Coy: Composites B, 2018, vol. 142, pp. 85–94. https://doi.org/10.1016/j.compositesb.2018.01.004.10.1016/j.compositesb.2018.01.004 ↗
18. O.D. Pogrebnjak, K.O. Dyadyura, and O.P. Gaponova: Metallofiz. Noveishie Tekhnol., 2015, vol. 37(7), pp. 899–919. https://doi.org/10.15407/mfint.37.07.0899.10.15407/mfint.37.07.0899 ↗
19. B. Antoszewski, S. Tofil, M. Scendo, and V. Tarelnik: IOP Conf. Ser. Mater. Sci. Eng., 2017, vol. 233, 012036https://doi.org/10.1088/1757-899X/233/1/012036.10.1088/1757-899X/233/1/012036 ↗
20. J. Górka, A. Lont, D. Janicki, T. Poloczek, and A. Rzeźnikiewicz: Coatings, 2024, vol. 14, p. 646. https://doi.org/10.3390/coatings14050646.10.3390/coatings14050646 ↗
21. B. Antoszewski, O.P. Gaponova, V.B. Tarelnyk, O.M. Myslyvchenko, P. Kurp, T.I. Zhylenko, and I. Konoplianchenko: Materials, 2021, vol. 14, p. 739. https://doi.org/10.3390/ma14040739.10.3390/ma14040739 ↗
22. J. Wang, M. Zhang, S. Dai, and L. Zhu: Coatings, 2023, vol. 13, p. 1473. https://doi.org/10.3390/coatings13081473.10.3390/coatings13081473 ↗
23. O.M. Myslyvchenko, O.P. Gaponova, V.B. Tarelnyk, and M.O. Krapivka: Powder Metall. Met. Ceram., 2020, vol. 59, pp. 201–08. https://doi.org/10.1007/s11106-020-00152-7.10.1007/s11106-020-00152-7 ↗
24. V.B. Tarel’nik, V.S. Martsinkovskii, E.V. Konoplyanchenko, A.V. Belous, and O.P. Gaponova: Chem. Pet. Eng., 2018, vol. 54, pp. 598–604. https://doi.org/10.1007/s10556-018-0521-0.10.1007/s10556-018-0521-0 ↗
25. V. Tarelnyk, I. Konoplianchenko, V. Martsynkovskyy, A. Zhukov, and P. Kurp: Advances in Design, Simulation and Manufacturing. DSMIE 2019. Lecture Notes in Mechanical Engineering, 2019. https://doi.org/10.1007/978-3-319-93587-4_40.10.1007/978-3-319-93587-4_40 ↗
26. V.B. Tarelnyk, I.V. Konoplianchenko, O.P. Gaponova, N.V. Tarelnyk, V.S. Martsynkovskyy, B.O. Sarzhanov, O.A. Sarzhanov, and B. Antoszewski: Powder Metall. Met. Ceram., 2020, vol. 58, pp. 703–13. https://doi.org/10.1007/s11106-020-00127-8.10.1007/s11106-020-00127-8 ↗
27. V.B. Tarel’nik, A.V. Paustovskii, Yu.G. Tkachenko, V.S. Martsinkovskii, E.V. Konoplyanchenko, and K. Antoshevskii: Surf. Eng. Appl. Electrochem., 2017, vol. 53, pp. 285–94. https://doi.org/10.3103/S1068375517030140.10.3103/S1068375517030140 ↗
28. L.P. Kornienko, G.P. Chernova, V.V. Mihailov, and A.E. Gitlevich: Surf. Eng. Appl. Electrochem., 2011, vol. 47, pp. 9–17. https://doi.org/10.3103/S106837551101011X.10.3103/S106837551101011X ↗
29. V. Martsynkovskyy, V. Tarelnyk, I. Konoplianchenko, O. Gaponova, and M. Dumanchuk: Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering, 2020. https://doi.org/10.1007/978-3-030-22365-6_22.10.1007/978-3-030-22365-6_22 ↗
30. M. Rukanskis: Surf. Eng. Appl. Electrochem., 2019, vol. 55, pp. 607–19. https://doi.org/10.3103/S1068375519050107.10.3103/S1068375519050107 ↗
31. V.B. Tarelnyk, O.P. Gaponova, Y.V. Konoplianchenko, V.S. Martsynkovskyy, N.V. Tarelnyk, and O.O. Vasylenko: Metallofiz. Noveishie Tekhnol., 2019, vol. 41, pp. 173–92. https://doi.org/10.15407/mfint.41.02.0173.10.15407/mfint.41.02.0173 ↗
32. V.B. Tarelnyk, O.P. Gaponova, Y.V. Konoplianchenko, V.S. Martsynkovskyy, N.V. Tarelnyk, and O.O. Vasylenko: Metallofiz. Noveishie Tekhnol., 2019, vol. 41, pp. 313–35. https://doi.org/10.15407/mfint.41.03.0313.10.15407/mfint.41.03.0313 ↗
33. V.B. Tarel’nik, E.V. Konoplyanchenko, P.V. Kosenko, and V.S. Martsinkovskii: Chem. Pet. Eng., 2017, vol. 53, pp. 540–46. https://doi.org/10.1007/s10556-017-0378-7.10.1007/s10556-017-0378-7 ↗
34. P. Leo, G. Renna, and G. Casalino: Appl. Sci., 2017, vol. 7, p. 945.10.3390/app7090945 ↗
35. W.J. Cheng and C.J. Wang: Appl. Surf. Sci., 2011, vol. 257(10), pp. 4663–668. https://doi.org/10.1016/j.apsusc.2010.12.118.10.1016/j.apsusc.2010.12.118 ↗
36. M. Brochu, J.G. Portillo, J. Milligan, and D.W. Heard: Open Surf. Sci. J., 2011, vol. 105(3), pp. 105–14. https://doi.org/10.2174/1876531901103010105.10.2174/1876531901103010105 ↗
37. P. Huilgol, K. Rajendra Udupa, and K. Udaya Bhat: Surf. Coat. Technol., 2019, vol. 375, pp. 544–53. https://doi.org/10.1016/j.surfcoat.2019.07.031.10.1016/j.surfcoat.2019.07.031 ↗
38. P. Huilgol, K. Udaya Bhat, and K. Rajendra Udupa: Mater. Today Proc., 2018, vol. 5(11), pp. 24702–4709. https://doi.org/10.1016/j.matpr.2018.10.268.10.1016/j.matpr.2018.10.268 ↗
39. P. Huilgol, K. Rajendra Udupa, and K. Udaya Bhat: Surf. Coat. Technol., 2018, vol. 348, pp. 22–30. https://doi.org/10.1016/j.surfcoat.2018.05.013.10.1016/j.surfcoat.2018.05.013 ↗
40. J.H. Westbrook, and R.L. Fleischer: Intermetallic Compounds—Principles and Practice: Progress, Wiley, 2002. https://doi.org/10.1002/0470845856.10.1002/0470845856 ↗
41. G.V. Kirik, O.P. Gaponova, V.B. Tarelnyk, O.M. Myslyvchenko, and B. Antoszewski: Powder Metall. Met. Ceram., 2018, vol. 56, pp. 688–96. https://doi.org/10.1007/s11106-018-9944-6.10.1007/s11106-018-9944-6 ↗
42. V.B. Tarelnyk, O.P. Gaponova, and O.M. Myslyvchenko: Metallofiz. Noveishie Tekhnol., 2019, vol. 41, pp. 1377–394. https://doi.org/10.15407/mfint.41.10.1377.10.15407/mfint.41.10.1377 ↗
43. V.B. Tarelnyk: Quality Control of Surface Layers of Parts by Combined Electroerosive Alloying, Publishing House ‘MacDen, Sumy, 2002. (in Russian).
44. S.V. Nikolenko, A.D. Verkhoturov, N.A. Syui, and E.N. Kuz’michev: Surf. Eng. Appl. Electrochem., 2016, vol. 52, pp. 342–49. https://doi.org/10.3103/S1068375516040098.10.3103/S1068375516040098 ↗
45. C. Barile, C. Casavola, G. Pappalettera, and G. Renna: Coatings, 2022, vol. 12, p. 1536. https://doi.org/10.3390/coatings12101536.10.3390/coatings12101536 ↗
46. P. Matysik, S. Jóźwiak, and T. Czujko: Materials, 2015, vol. 8, pp. 914–31. https://doi.org/10.3390/ma8030914.10.3390/ma8030914 ↗
47. X. Hong, Y. Tan, C. Zhou, T. Xu, and Zh. Zhang: Appl. Surf. Sci., 2015, vol. 356, pp. 1244–251. https://doi.org/10.1016/j.apsusc.2015.08.233.10.1016/j.apsusc.2015.08.233 ↗
48. N. Radek, J. Bronček, P. Fabian, J. Pietraszek, and K. Antoszewski: Mater. Sci. Forum, 2015, vol. 818, pp. 61–4. https://doi.org/10.4028/www.scientific.net/msf.818.61.10.4028/www.scientific.net/msf.818.61 ↗
49. Z. Jiao, S. Peterkin, L. Felix, R. Liang, J.P. Oliveira, N. Schell, N. Scotchmer, E. Toyserkani, and Y. Zhou: J. Mater. Eng. Perform., 2018, vol. 27, pp. 4799–809. https://doi.org/10.1007/s11665-018-3579-0.10.1007/s11665-018-3579-0 ↗
50. G. Renna, P. Leo, G. Casalino, and E. Cerri: Adv. Mater. Sci. Eng., 2018, https://doi.org/10.1155/2018/8563054.10.1155/2018/8563054 ↗
51. Y. Wei, A. Feng, C. Chen, D. Shang, X. Pan, and J. Xue: Coatings, 2023, vol. 13, p. 1039. https://doi.org/10.3390/coatings13061039.10.3390/coatings13061039 ↗
52. A. Lešnjak and J. Tušek: Sci. Technol. Weld. Join., 2002, vol. 7(6), pp. 391–96. https://doi.org/10.1179/136217102225006886.10.1179/136217102225006886 ↗
53. T. Penyashki, G. Kostadinov, M. Kandeva, A. Nikolov, R. Dimitrova, V. Kamburov, P. Danailov, and S. Bozhkov: Tribol. Ind., 2023, vol. 46(1), pp. 13–28. https://doi.org/10.24874/ti.1508.06.23.08.10.24874/ti.1508.06.23.08 ↗
54. O. Sahin and A.V. Ribalko: Mass Transfer-Advanced Aspects, InTech, London, 2011. https://doi.org/10.5772/24339.10.5772/24339 ↗
55. K. Korkmaz, A.V. Ribalko, and O. Sahin: Met. Mater., 2013, vol. 51, pp. 283–89. https://doi.org/10.4149/km20135283.10.4149/km20135283 ↗
56. D. Marchenko and K. Matvyeyeva: Probl. Tribol., 2023, vol. 28, pp. 65–72.10.31891/2079-1372-2023-107-1-65-72 ↗
57. N. Radek, J. Pietraszek, and A. Szczotok: Proceedings 26th International Conference on Metallurgy and Materials, 2017, pp. 1432–37.
58. M.S. Storozhenko, O.P. Umanskyi, V.B. Tarelnyk, OYu. Koval, Yu.V. Gubin, M.O. Mikulina, I.S. Martsenyuk, O.D. Kostenko, and T.V. Kurinna: Powder Metall. Met. Ceram., 2020, vol. 59, pp. 330–41.10.1007/s11106-020-00166-1 ↗
59. V. Tarelnyk, O. Gaponova, O. Myslyvchenko, and B.O. Sarzhanov: Powder Metall. Met. Ceram., 2020, vol. 59, pp. 76–88. https://doi.org/10.1007/s11106-020-00152-7.10.1007/s11106-020-00152-7 ↗
60. C. Barile, C. Casavola, G. Pappalettera, and G. Renna: Coatings, 2022, vol. 12, p. 1536.10.3390/coatings12101536 ↗
61. R.J. Borg and G.J. Dienes: An Introduction to Solid State Diffusion, Academic, San Diego, 2012.
62. O.Y. Dubei, T.F. Tutko, L.Y. Ropyak, and M.V. Shovkoplias: Metallofiz. Noveishie Tekhnol., 2022, vol. 44(2), pp. 251–72. https://doi.org/10.15407/mfint.44.02.0251.10.15407/mfint.44.02.0251 ↗
63. O.P. Gaponova, V.B. Tarelnyk, B. Antoszewski, N. Radek, N.V. Tarelnyk, P. Kurp, O.M. Myslyvchenko, and J. Hoffman: Materials, 2022, vol. 15, p. 6085. https://doi.org/10.3390/ma15176085.10.3390/ma15176085 ↗