Effective Electrical and Thermal Conductivities of Porous Sintered Metallic Compacts
Source abstract
Abstract
Abstract In this paper, five laws proposed to describe the influence of porosity on the effective conductivity (both electrical and thermal) of porous materials, which include a single microstructural parameter, are analyzed. These five laws are as follows: (1) the linear law with threshold, (2) the power law without threshold (Archie’s law), (3) the power law with threshold (percolation law), (4) the exponential law without threshold (decay law), and (5) the exponential law with threshold (Mooney-type law). These laws are discussed and derived from statistical reasoning (taken from the field of Stereology) or from probabilistic reasoning (taken from the field of risk analysis). The five laws are contrasted with the experimental values of electrical and thermal conductivities measured on metallic samples with different porosity, obtained by cold pressing and furnace sintering of four elementary powders (2 of iron, nickel, and aluminum). The study carried out allows to conclude that all the laws analyzed provide satisfactory agreements, but the percolation law is slightly superior to the others, since the values of its microstructural parameter remain within the uncertainty range to support a coherent physical interpretation, which is not the case for the other laws. Finally, the work also addresses the variability with porosity of the Wiedemann–Franz law, finding that it holds reasonably valid for low porosities, but not for higher porosities, which has been justified as a result of the different influence that the oxide layers of the metal powder particles exert on the electrical and thermal conductivities. Graphical Abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Powder Metallurgy Techniques and Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. L.J. Gibson and M.F. Ashby: Cellular Solids—Structure and Properties, 2nd ed., Cambridge University Press, Cambridge, 1997, pp. 175–234, 283–98.
2. N. Phan-Thien and D.C. Pham: Int. J. Eng. Sci., 2000, vol. 38, pp. 73–88.10.1016/S0020-7225(99)00016-6 ↗
3. S. Torquato: Random Heterogeneous Materials—Microstructure and Macroscopic Properties, Springer, New York, 2002, pp. 437–563.10.1007/978-1-4757-6355-3_17 ↗
4. F. Ternero, L.G. Rosa, P. Urban, J.M. Montes, and F.G. Cuevas: Metals, 2021, vol. 11, p. 730. https://doi.org/10.3390/met11050730.10.3390/met11050730 ↗
5. C. Kittel: Introduction to Solid State Physics, 9th ed. Wiley, New York, 2018.
6. V.I. Odelevskii: Zh. Tekh. Fiz., 1951, vol. 21(6), pp. 678–85.
7. P. Grootenhuis, R.W. Powell, and R.P. Tye: Proc. Phys. Soc. B, 1952, vol. 65, pp. 502–11.10.1088/0370-1301/65/7/305 ↗
8. A.L. Loeb: J. Am. Ceram. Soc., 1954, vol. 37(2), pp. 96–99.10.1111/j.1551-2916.1954.tb20107.x ↗
9. G.E. Archie: Trans. AIME, 1942, vol. 146, pp. 54–67.10.2118/942054-G ↗
10. K. Markov: in: Heterogeneous Media—Micromechanics Modeling Methods and Simulations, K. Markov and L. Preziosi, eds., Birkhäuser, Boston, 2000, pp. 1–162.10.1007/978-1-4612-1332-1_1 ↗
11. A.L. Efros: Physics and Geometry of Disorder. Percolation Theory, MIR, Moscow, 1985.
12. D. Stauffer and A. Aharony: Introduction to Percolation Theory, Taylor and Francis, London, 1994.
13. S. Torquato: Random Heterogeneous Materials: Microstructure and Macroscopic Properties, Springer, New York, 2009.
14. M. Sahimi: Heterogeneous Materials I, Springer, New York, 2003.
15. D.S. McLachlan: J. Phys. C Solid State Phys., 1985, vol. 18, pp. 1891–97.10.1088/0022-3719/18/9/022 ↗
16. J.M. Montes, J.A. Rodríguez, and E.J. Herrera: Powder Metall., 2003, vol. 46(3), pp. 251–56.10.1179/003258903225008544 ↗
17. J.M. Montes, F.G. Cuevas, and J. Cintas: Appl. Phys. A, 2008, vol. 92, pp. 375–80.10.1007/s00339-008-4534-y ↗
18. D. Vose: Risk Analysis: A Quantitative Guide, 3rd ed. Wiley, Hoboken, 2008.
19. G. Tichá, W. Pabst, and D. Smith: J. Mater. Sci., 2005, vol. 40(18), pp. 5045–47.10.1007/s10853-005-1818-x ↗
20. W. Pabst and E. Gregorová: J. Mater. Sci., 2004, vol. 39, pp. 3213–15. https://doi.org/10.1023/B:JMSC.0000025863.55408.c9.10.1023/B:JMSC.0000025863.55408.c9 ↗
21. International Standard ISO 13320: Particle Size Analysis—Laser Diffraction Method, 2nd ed., ISO, Switzerland, 2020.
22. ASTM B923: Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry, ASTM International, West Conshohocken, 2022.
23. MPIF Standard 46: in Standard Test Methods for Metal Powders and Powder Metallurgy Products, MPIF, Metal Powder Industries Federation, Princeton, 2016.
24. Standard Test Methods for Metal Powders and Powder Metallurgy Products: Method for Determination of Compressibility of Metal Powders, Standard 45, Metal Powder Industries Federation (MPIF), Princeton, 2002.
25. ASTM-B193-19, Standard Test Method for Resistivity of Electrical Conductor Materials, ASTM International, West Conshohocken, 2019.
26. ASTM E1461-13, Standard Test Method for Thermal Diffusivity by the Flash Method. ASTM International, ASTM International, West Conshohocken, 2022.
27. W.M. Haynes (Editor-in-Chief): CRC Handbook of Chemistry and Physics, 97th ed., CRC Press, Boca Raton, 2016–2017.