journal article·2025-08Open access

Isothermal Bainitic Transformation in High-Alloyed C + N Steel: Influence of Carbon and Nitrogen on Microstructure and Mechanical Properties

Philip König, Jonathan Lentz, Sebastian Weber

Abstract

Abstract In order to gain insight into the bainitic transformation of carbon- and nitrogen (C + N)-alloyed steels, first investigations were conducted on the steel DIN EN X30CrMoN15-1. In particular, the influence of C and N on the transformation characteristics, resulting microstructure and associated mechanical properties was subjected to detailed analysis. Quenching dilatometry was employed to conduct isothermal heat treatments, concurrently acquiring data on transformation behavior and assessing suitable heat treatment parameters for mechanical properties. Scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) studies demonstrate the presence of bainitic microstructures with retained austenite following isothermal heat treatments of 24 hours. Annealing temperatures of 200 °C yielded nanoscale plate-like bainite structures with plate widths below 40 nanometers and hardness exceeding 600 HV10. Wavelength dispersive X-ray spectroscopy (WDS) measurements were able to demonstrate that during bainite formation the N diffusion behavior is comparable to C. TEM studies were employed to examine the nanoscale microstructure in detail and revealed Fe2C and Cr2N precipitates. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. H.I. Aaronson and H.J. Lee: Scr. Metall., 1987, vol. 21, pp. 1011–16.10.1016/0036-9748(87)90241-9 ↗
2. E.C. Bain: American Society for Metals, Functions of the Alloying Elements in Steel, American Society for Metals, 1939.
3. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall Trans A, 1979, vol. 10, pp. 895–907.10.1007/BF02658309 ↗
4. R.F. Hehemann, K.R. Kinsman, and H.I. Aaronson: Metall Trans A, 1972, vol. 3, pp. 1077–94.10.1007/BF02642439 ↗
5. U. Dahmen: Scr. Metall., 1987, vol. 21, pp. 1029–34.10.1016/0036-9748(87)90244-4 ↗
6. L. Leach: Modeling Bainite Formation in Steels. Dissertation, Stockholm, 2018.
7. F.B. Pickering: Structure and Properties of Bainite in Steels, Transformation and Hardenability in Steels, 1967.
8. H.K.D.H. Bhadeshia: Bainite in Steels: Theory and Practice, Third Edition, CRC Press, 2018.10.1201/9781315096674 ↗
9. L. Leach, M. Hillert, and A. Borgenstam: Metall Trans A, 2016, vol. 47, pp. 19–25.10.1007/s11661-015-3241-5 ↗
10. L. Leach, P. Kolmskog, L. Höglund, M. Hillert, and A. Borgenstam: Metall Trans A, 2018, vol. 49, pp. 4509–20.10.1007/s11661-018-4819-5 ↗
11. S.J. Matas and R.F. Hehemann: Trans. Metall. Soc. AIME, 1961, vol. 221, pp. 179–85.
12. H. Bhadeshia: Acta Metall., 1980, vol. 28, pp. 1103–14.10.1016/0001-6160(80)90093-0 ↗
13. H. Bhadeshia: Acta Metall., 1981, vol. 29, pp. 1117–30.10.1016/0001-6160(81)90063-8 ↗
14. M. Azuma, N. Fujita, M. Takahashi, T. Senuma, D. Quidort, and T. Lung: ISIJ Int., 2005, vol. 45, pp. 221–28.10.2355/isijinternational.45.221 ↗
15. H.I. Aaronson, W.T. Reynolds, G.J. Shiflet, and G. Spanos: Metall Trans A, 1990, vol. 21, pp. 1343–80.10.1007/BF02672557 ↗
16. H. Feichtinger, A. Satir-Kolorz, Z. Xiaohong: Solubility of nitrogen in solid and liquid iron alloys with special regard to the melting range, High Nitrogen Steel, 1989, p. 75.
17. Z. Jiang, X. Li, J. Gu, M. Hu, and Z. Zhu: Appl. Surf. Sci., 2008, vol. 254, pp. 7361–64.10.1016/j.apsusc.2008.05.334 ↗
18. Z.-J. Jiang, X.-L. Li, J.-F. Gu, M.-J. Hu, and Z.-C. Zhu: Surf. Coat. Technol., 2008, vol. 202, pp. 2638–43.10.1016/j.surfcoat.2007.09.030 ↗
19. D. Jiao, C.P. Luo, and J. Liu: Scripta Mater., 2007, vol. 56, pp. 613–16.10.1016/j.scriptamat.2006.12.011 ↗
20. N. Nakada, N. Fukuzawa, T. Tsuchiyama, S. Takaki, T. Koyano, T. Iwamoto, and Y. Omori: ISIJ Int., 2013, vol. 53, pp. 139–44.10.2355/isijinternational.53.139 ↗
21. S.D. Catteau, H.P. van Landeghem, J. Teixeira, J. Dulcy, M. Dehmas, S. Denis, A. Redjaïmia, et al.: J. Alloy. Compd., 2016, vol. 658, pp. 832–38.10.1016/j.jallcom.2015.11.007 ↗
22. J. Foct, P. Rochegude, and A. Hendry: Acta Metall., 1988, vol. 1988, pp. 501–05.10.1016/0001-6160(88)90081-8 ↗
23. T. Bell, B.C. Farnell: The isothermal decomposition of nitrogen austenite to bainite, Mechanism of Phase Transformations in Crystalline Solids, 1969, pp. 282–87.
24. F.G. Caballero, C. García-mateo, C. Capdevila, and C.G. de Andrés: Mater. Manuf. Processes, 2007, vol. 22, pp. 502–06.10.1080/10426910701236023 ↗
25. V.G. Gavriljuk, H. Berns: High Nitrogen steels: Structure, properties, manufacture, applications. Springer Berlin Heidelberg, Berlin, Heidelberg, 1999.10.1007/978-3-662-03760-7 ↗
26. N. Krasokha and H. Berns: HTM J Heat Treat Mat, 2011, vol. 66, pp. 150–64.10.3139/105.110099 ↗
27. L. Mújica Roncery: Development of high-strength corrosion-resistant austenitic TWIP steels with C+N. Bochum, Univ., Diss., 2010.
28. H. Berns, V. Gavriljuk, and S. Riedner: High interstitial stainless austenitic steels, Springer, Berlin, Heidelberg, 2013.10.1007/978-3-642-33701-7 ↗
29. Energietechnik Essen GmbH, Data sheet 1.4108, 2003.
30. DIN EN ISO 6507-1:2018-07, Metallische Werkstoffe_- Härteprüfung nach Vickers_- Teil_1: Prüfverfahren (ISO_6507-1:2018); Deutsche Fassung EN_ISO_6507-1:2018, Berlin, Beuth Verlag GmbH, https://doi.org/10.31030/2778746.10.31030/2778746 ↗
31. A. Eres-Castellanos, L. Morales-Rivas, A. Latz, F.G. Caballero, and C. Garcia-Mateo: Mater. Charact., 2018, vol. 145, pp. 371–80.10.1016/j.matchar.2018.08.062 ↗
32. A. Eres-Castellanos, L. Morales-Rivas, F.G. Caballero, and C. Garcia-Mateo: J. Alloy. Compd., 2021, vol. 864, p. 158130.10.1016/j.jallcom.2020.158130 ↗
33. F.G. Caballero, C. Garcia-Mateo, and C.G. de Andres: Mater. Trans., 2005, vol. 46, pp. 581–86.10.2320/matertrans.46.581 ↗
34. H.I. Aaronson, C. Wells: Sympathetic nucleation of ferrite. Trans. A.I.M.E, 1956, pp. 1216–23.10.1007/BF03377853 ↗
35. H.K.D.H. Bhadeshia: J Phys, 1982, pp. C4–443.
36. M. Hillert: Jernkont. Ann, 1957, p. 757.
37. U.M. Hillert: The Growth of Ferrite, Bainite and Martensite, Swedish Institute for Metal Research, Internal Report, Stockholm, 1960.
38. MK Kang, M Zhu, and MX Zhang: J. Mater. Sci. Technol., pp. 437–44.
39. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1238–43.10.2355/isijinternational.43.1238 ↗
40. X. Tao, J. Gu, and L. Han: ISIJ Int., 2014, vol. 54, pp. 1705–14.10.2355/isijinternational.54.1705 ↗
41. D.N. Shackleton and P.M. Kelly: Acta Metall., 1967, vol. 15, pp. 979–92.10.1016/0001-6160(67)90263-5 ↗