journal article·2016-07

Effect of Vanadium on the Hot Deformation Behavior of Vanadium-Microalloyed Steel for Thin Slab Direct Rolling

Chang Wook Lee, Hwan Goo Seong, Bruno C. De Cooman

Publisher page

Abstract

The effects of V on hot deformation properties of low-carbon steel were investigated in the temperature range of 1173 K to 1473 K (900 °C to 1200 °C) and for strain rates from 0.1 to 5 s−1 for compositions with a V content in the range of 0 to 0.125 wt pct. The critical stress and strain for dynamic recrystallization (DRX) initiation were obtained from the stress dependence of the strain hardening rate. The hot deformation properties of V-alloyed steel were studied in function of the temperature-corrected strain rate. The experimental results were used to construct a kinetic model of DRX. V was found to have no influence on the hot deformation properties for V contents less than 0.125 pct, indicating the absence of both solute drag and precipitation effects at low V content. When the V content reached 0.125 wt pct, the activation energy for DRX increased and DRX was suppressed in high strain rate condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. J. M. Rodriguez-Ibabe, Thin Slab Direct Rolling of Microalloyed steels, 1st ed., Trans Tech Publications, Zurich, 2007.
2. Y. Lee, B. C. De Cooman, ISIJ International, 54 (4) (2014) 893-899.10.2355/isijinternational.54.893 ↗
3. P. Uranga, B. Lopez, J. M. Rodriguez-Ibabe, Ironmaking and Steelmaking, 36 (3) (2009) 162-169.10.1179/174328109X401505 ↗
4. Y. Maehara, K. Yasumoto, H. Tomono, T. Nagamichi, Y. Ohmori, Materials Science and Technology, 6 (1990) 793-806.10.1179/mst.1990.6.9.793 ↗
5. M. Charleux, W. J. Poole, M. Militzer, A. Deschamps, Metall. Mater. Trans. A, 32 (2001) 1632-1647.
6. Y. Li, J. A. Wilson, D. N. Crowther, P. S. Mitchell, A. J. Craven, T. N. Baker, ISIJ international, 44 (6) (2004) 1093-1102.10.2355/isijinternational.44.1093 ↗
7. Y. Lee, B. C. De Cooman, Steel Research International, 85 (7) (2014) 1158-1172.10.1002/srin.201300280 ↗
8. R.J. Glodowski: in, Presented at TSCR2002, The International Symposiumon Thin-Slab Casting and Rolling, December 3–5, Guangzhou, China, 2002.
9. B. Mintz, R. Abushosha, Ironmaking and Steelmaking, 20 (6) (1993) 445-452.
10. J. J. Jonas, Mater. Sci. Eng. A, 184 (1994) 155-165.10.1016/0921-5093(94)91028-6 ↗
11. N. Carñans, N. Akdut, J. Penning, B. C. De Cooman, Metall. Mater. Trans. A, 37 (2006) 3305-3315.
12. S. F. Medina, C. A. Hernandez, Acta. Mater. 44 (1) (1996) 137-148.10.1016/1359-6454(95)00151-0 ↗
13. A. M. Elwazri, P. Wanjara, S. Yue, Mater. Sci. Eng. A, 339 (2003) 209-215.10.1016/S0921-5093(02)00164-8 ↗
14. M. Meysami, S. A. A. A. Mousavi, Mater. Sci. Eng. A, 528 (2011) 3049-3055.10.1016/j.msea.2010.11.093 ↗
15. H. Mirzadeh, J. M. Cabrera, J. M. Prado, A. Najafizadeh, Mater. Sci. Eng. A, 528 (2011) 3876-3882.10.1016/j.msea.2011.01.098 ↗
16. H. Wei, G. Liu, X. Xiao, M. Zhang, Mater. Sci. Eng. A, 573 (2013) 215-221.10.1016/j.msea.2013.03.009 ↗
17. H. Wei, G. Liu. H. Zhao, M. Zhang, Mater. Sci. Eng. A, 596 (2014) 112-120.10.1016/j.msea.2013.12.063 ↗
18. B. Zhao, T. Zhao, G. Li. Q. Lu, Mater. Sci. Eng. A, 604 (2014) 117-121.10.1016/j.msea.2014.03.019 ↗
19. S. K. Badjena, ISIJ International, 54 (3) (2014) 650-656.10.2355/isijinternational.54.650 ↗
20. E. I. Poliak, J. J. Jonas, Acta Mater., 44 (1) (1996) 127-136.10.1016/1359-6454(95)00146-7 ↗
21. A. Najafizadeh, J. J. Jonas, 46 (11) (2006) 1679-1684.10.2355/isijinternational.46.1679 ↗
22. Z. Zhang, Y. Liu, X. Liang, Y. She, Mater. Sci. Eng. A, 474 (2008) 254-260.10.1016/j.msea.2007.04.041 ↗
23. H. Wei, G. Liu, Materials and Design, 56 (2014) 437-444.10.1016/j.matdes.2013.11.009 ↗
24. B. Pereda, A. I. Fernández, B. López, J. M. Rodriguez-Ibabe, ISIJ International, 47 (6) (2007) 860-868.10.2355/isijinternational.47.860 ↗
25. T. Schambron, L. Chen, T. Gooch, A. Denhghan-Manshadi, E. V. Pereloma, Steel Research International, 84 (12) (2013) 1191-1195.10.1002/srin.201300035 ↗
26. E. I. Poliak, J. J. Jonas, ISIJ Int., 43 (5) (2003) 684-691.10.2355/isijinternational.43.684 ↗
27. Y. W. Xu, D. Tang, Y. Song, X. G. Pan, Mater. Des. 39 (2012) 168-174.10.1016/j.matdes.2012.02.034 ↗
28. H. Mirzadeh, A. Najafizadeh, Mater. Des. 31 (2010) 4577-4583.10.1016/j.matdes.2010.05.052 ↗
29. C. Zener, J. H. Hollomon, J. Appl. Phys., 15 (1944) 22-32.10.1063/1.1707363 ↗
30. C. M. Sellars, W. J. Tegart, Mem. Sci. Rev. Metall., 63 (1966) 731-746.10.1051/metal/196663090731 ↗
31. H. L. Andrade, M. G. Akben, J. J. Jonas, Metall. Mater. Trans. A, 14 (1967) 1967-1977.
32. S. H. Cho, K. B. Kang, J. J. Jonas, ISIJ Int., 41 (1) (2001) 63-69.10.2355/isijinternational.41.63 ↗
33. M. El Wahabi, L. Gavard, F. Montheillet, J. M. Cabrera, J. M. Prado, Acta Materialia, 53 (2005) 4605-4612.10.1016/j.actamat.2005.06.020 ↗
34. M. El Wahabi, J. M. Cabrera, J. M. Prado, Mater. Sci. Eng. A, 343 (2003) 116-125.10.1016/S0921-5093(02)00357-X ↗
35. P.D. Hodgson: Doctoral Theses, University of Queensland, Australia, 1993.