Fe Nitride Formation in Fe–Si Alloys: Crystallographic and Thermodynamic Aspects
Source abstract
Abstract
Abstract A Fe–3wt pctSi alloy was gas nitrided to study the effect of Si on the Fe nitride formation. Both ε-Fe3N1+x and γ′-Fe4N were observed at nitriding conditions only allowing to form single-phase γ′ layers in pure α-Fe. During short nitriding times, ε and γ′ simultaneously grow in contact with Si-supersaturated α-Fe(Si). Both nitrides almost invariably exhibit crystallographic orientation relationships with α-Fe, which are indicative of a partially displacive transformation of α-Fe being involved in the initial formation of ε and γ′. Due to Si constraining the Fe nitride growth, such transformation mechanism becomes highly important to the nitride layer formation, causing α-Fe-grain-dependent variations in the nitride layer morphology and thickness, as well as microstructure refinement within the nitride layer. After prolonged nitriding, α-Fe is depleted in Si due the pronounced precipitation of Si-rich nitride in α-Fe. The growth mode of the compound layer changes, now advancing by conventional planar-type growth. During nitriding times of 1 to 48 hours, ε exists in contact with the NH3/H2-containing nitriding atmosphere at a nitriding potential of 1 atm−1/2 and 540 °C, only allowing for the formation of γ′ in pure Fe, indicating that Si affects the thermodynamic stability ranges of ε and γ′.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. J. R. Davis, ed.: Cast Irons, Materials Park, OH, 1996.
2. F.G. Caballero, M.K. Miller, C. Garcia-Mateo, C. Capdevila, and S.S. Babu: Acta Mater., 2008, vol. 56, pp. 188–99.10.1016/j.actamat.2007.09.018 ↗
3. E. Kozeschnik and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2008, vol. 24, pp. 343–7.10.1179/174328408X275973 ↗
4. H. Berns and W. Theisen: Eisenwerkstoffe - Stahl und Gusseisen. Springer, Berlin, Heidelberg, 2008.
5. L.C. Casteletti, R.M.M. Riofano, and P.A.P. Nascente: Mater. Sci. Technol., 2004, vol. 20, pp. 1171–8.10.1179/026708304225021954 ↗
6. R.M.M. Riofano, L.C. Casteletti, and P.A.P. Nascente: J. Mater. Eng. Perform., 2005, vol. 14, pp. 75–84.10.1361/10599490522347 ↗
7. W. Zhao, D. Liu, H. Qin, X. Zhang, H. Zhang, R. Zhang, Z. Ren, C. Ma, A. Amanov, Y.-S. Pyun, G.L. Doll, Y. Dong, and C. Ye: Surf. Coat. Technol., 2019, vol. 375, pp. 205–14.10.1016/j.surfcoat.2019.07.006 ↗
8. M. Hernandez, M.H. Staia, and E.S. Puchi-Cabrera: Surf. Coat. Technol., 2008, vol. 202, pp. 1935–43.10.1016/j.surfcoat.2007.08.018 ↗
9. S.S. Akhtar, A.F.M. Arif, and B.S. Yilbas: Int. J. Adv. Manuf. Technol., 2010, vol. 47, pp. 687–98.10.1007/s00170-009-2215-4 ↗
10. J. Baranowska: Surf. Coat. Technol., 1998, vol. 100–101, pp. 271–5.10.1016/S0257-8972(97)00631-2 ↗
11. X. Nie, L. Wang, Z.C. Yao, L. Zhang, and F. Cheng: Surf. Coat. Technol., 2005, vol. 200, pp. 1745–50.10.1016/j.surfcoat.2005.08.046 ↗
12. G. Nicoletto, A. Tucci, and L. Esposito: Wear., 1996, vol. 197, pp. 38–44.10.1016/0043-1648(95)06753-1 ↗
13. A. Buchwalder, N. Klose, and R. Zenker: Metall. Ital., 2020, vol. 112, pp. 28–39.
14. T. Liapina, A. Leineweber, E.J. Mittemeijer, and W. Kockelmann: Acta Mater., 2004, vol. 52, pp. 173–80.10.1016/j.actamat.2003.09.003 ↗
15. H.A. Wriedt, N.A. Gokcen, and R.H. Nafziger: Bull. Alloy Phase Diagrams., 1987, vol. 8, pp. 355–77.10.1007/BF02869273 ↗
16. A. Leineweber, H. Jacobs, F. Hüning, H. Lueken, and W. Kockelmann: J. Alloys Compd., 2001, vol. 316, pp. 21–38.10.1016/S0925-8388(00)01435-3 ↗
17. H. Jacobs, D. Rechenbach, and U. Zachwieja: J. Alloys Compd., 1995, vol. 227, pp. 10–7.10.1016/0925-8388(95)01610-4 ↗
18. H.P. van Landeghem, M. Gouné, S. Bordère, F. Danoix, and A. Redjaimia: Acta Mater., 2015, vol. 93, pp. 218–34.10.1016/j.actamat.2015.04.032 ↗
19. S. Kante, P. Kürnsteiner, B. Gault, M. Motylenko, and A. Leineweber: Acta Mater., 2021, vol. 209, p. 116774.10.1016/j.actamat.2021.116774 ↗
20. M.H. Biglari, C.M. Brakman, M.A.J. Somers, W.G. Sloof, and E.J. Mittemeijer: Z. Metallkd., 1993, vol. 84, pp. 124–31.
21. T. Steiner and E.J. Mittemeijer: J. Mater. Eng. Perform., 2016, vol. 25, pp. 2091–102.10.1007/s11665-016-2048-x ↗
22. H. Selg, E. Bischoff, S.R. Meka, R.E. Schacherl, T. Waldenmaier, and E.J. Mittemeijer: Metall. Mat. Trans. A., 2013, vol. 44, pp. 4059–70.10.1007/s11661-013-1762-3 ↗
23. S.R. Meka, K.S. Jung, E. Bischoff, and E.J. Mittemeijer: Philos. Mag., 2012, vol. 92, pp. 1435–55.10.1080/14786435.2011.648226 ↗
24. B. Schwarz, S.R. Meka, R.E. Schacherl, E. Bischoff, and E.J. Mittemeijer: Acta Mater., 2014, vol. 76, pp. 394–403.10.1016/j.actamat.2014.05.017 ↗
25. B. Schwarz, P.J. Rossi, L. Straßberger, F. Jörg, S.R. Meka, E. Bischoff, R.E. Schacherl, and E.J. Mittemeijer: Philos. Mag., 2014, vol. 94, pp. 3098–119.10.1080/14786435.2014.952258 ↗
26. E.J. Mittemeijer, M.H. Biglari, A.J. Böttger, N.M. van der Pers, W.G. Sloof, and F.D. Tichelaar: Scr. Mater., 1999, vol. 41, pp. 625–30.10.1016/S1359-6462(99)00143-8 ↗
27. S.R. Meka, E. Bischoff, B. Rheingans, and E.J. Mittemeijer: Philos. Mag. Lett., 2013, vol. 93, pp. 238–45.10.1080/09500839.2012.762465 ↗
28. H.P. van Landeghem, M. Gouné, T. Epicier, and A. Redjaimia: Scr. Mater., 2013, vol. 68, pp. 187–90.10.1016/j.scriptamat.2012.10.014 ↗
29. G.R. Booker and J. Norbury: Nature., 1959, vol. 184, pp. 1311–2.10.1038/1841311b0 ↗
30. F. Meng, G. Miyamoto, and T. Furuhara: Mater. Trans., 2021, vol. 62, pp. 596–602.10.2320/matertrans.H-M2021807 ↗
31. A.M. Maliska, A.N. Klein, and A.R. de Souza: Surf. Coat. Technol., 1995, vol. 70, pp. 175–9.10.1016/0257-8972(94)02269-V ↗
32. H.P. van Landeghem, M. Gouné, and A. Redjaimia: Steel Res. Int., 2012, vol. 83, pp. 590–3.10.1002/srin.201100264 ↗
33. S.R. Meka and E.J. Mittemeijer: JOM., 2013, vol. 65, pp. 769–75.10.1007/s11837-013-0603-6 ↗
34. S.R. Meka, A. Schubert, E. Bischoff, and E.J. Mittemeijer: Metall. Mat. Trans. A., 2020, vol. 51, pp. 3154–66.10.1007/s11661-020-05713-4 ↗
35. Thermo-Calc Software AB: TCFE Steels/Fe-Alloys Database Version 7, 2020.
36. H. Atmani and O. Thoumire: Bull. Mater. Sci., 2002, vol. 25, pp. 219–25.10.1007/BF02711157 ↗
37. V.A. Fedchun and N.V. Silina: Met. Sci. Heat Treat., 1988, vol. 30, pp. 890–5.10.1007/BF00775306 ↗
38. A. V.C. Sobral, A. C. Boblitz Parente, J. L.R. Muzart, and C. V. Franco: Surf. Coat. Technol., 1997, vol. 92, pp. 10–15.10.1016/S0257-8972(97)00006-6 ↗
39. W. Pitsch: Philos. Mag., 1959, vol. 4, pp. 577–84.10.1080/14786435908238253 ↗
40. U. Dahmen, P. Ferguson, and K.H. Westmacott: Acta Metall., 1987, vol. 35, pp. 1037–46.10.1016/0001-6160(87)90051-4 ↗
41. W. Pitsch: Arch. Eisenhüttenwes., 1961, vol. 32, pp. 573–9.10.1002/srin.196103247 ↗
42. H. Schumann, G. Richter, and A. Leineweber: J. Appl. Crystallogr., 2020, vol. 53, pp. 865–79.10.1107/S1600576720005981 ↗
43. H. Schumann and A. Leineweber: Materialia, 2021, vol. 17, p. 101119.10.1016/j.mtla.2021.101119 ↗
44. G. Wassermann: Mitt. Kaiser-Wilhelm-Inst. Eisenforsch., 1935, vol. 17, pp. 149–55.
45. Z. Nishiyama: Sci. Rep. Tohoku Univ., 1934, vol. 23, pp. 637–64.
46. W.G. Burgers: Physica., 1934, vol. 1, pp. 561–86.10.1016/S0031-8914(34)80244-3 ↗
47. D. Gerardin, H. Michel, and M. Gantois: Scripta Metall., 1977, vol. 11, pp. 557–61.10.1016/0036-9748(77)90108-9 ↗
48. D. Gerardin, J.P. Morniroli, H. Michel, and M. Gantois: J. Mater. Sci., 1981, vol. 16, pp. 159–69.10.1007/BF00552070 ↗
49. E. J. Mittemeijer: Steel Heat Treating Fundamentals and Processes, Ed. by J. L. Dossett and G. E. Totten, ASM international, 2013, pp. 619–46.10.31399/asm.hb.v04a.a0005818 ↗
50. A. Leineweber, T. Gressmann, and E.J. Mittemeijer: Surf. Coat. Technol., 2012, vol. 206, pp. 2780–91.10.1016/j.surfcoat.2011.11.035 ↗
51. H. Göhring, O. Fabrichnaya, A. Leineweber, and E.J. Mittemeijer: Metall. Mat. Trans. A., 2016, vol. 47, pp. 6173–86.10.1007/s11661-016-3731-0 ↗
52. A. A. Coelho: Topas 5, Bruker AXS GmbH, Karlsruhe.
53. S.I. Wright, M.M. Nowell, S.P. Lindeman, P.P. Camus, M. de Graef, and M.A. Jackson: Ultramicroscopy., 2015, vol. 159, pp. 81–94.10.1016/j.ultramic.2015.08.001 ↗
54. F. Bachmann, R. Hielscher, and H. Schaeben: Ultramicroscopy., 2011, vol. 111, pp. 1720–33.10.1016/j.ultramic.2011.08.002 ↗
55. R. Krakow, R. J. Bennett, D. N. Johnstone, Z. Vukmanovic, W. Solano-Alvarez, S. J. Lainé, J. F. Einsle, P. A. Midgley, C. M. F. Rae, and R. Hielscher: Proc. R. Soc. London, Ser. A, 2017, vol. 473.10.1098/rspa.2017.0274 ↗
56. G. Nolze and R. Hielscher: J. Appl. Crystallogr., 2016, vol. 49, pp. 1786–802.10.1107/S1600576716012942 ↗
57. S. Kante and A. Leineweber: Acta Mater., 2019, vol. 170, pp. 240–52.10.1016/j.actamat.2019.03.029 ↗
58. A.A. Kodentsov, M.J.H. van Dal, J.K. Kivilahti, and F.J.J. van Loo: Ber. Bunsenges. Phys. Chem., 1998, vol. 102, pp. 1326–33.10.1002/bbpc.19981020945 ↗
59. A.A. Kodentsov, M.J.H. van Dal, C. Cserháti, L. Daróczi, and F.J.J. van Loo: Acta Mater., 1999, vol. 47, pp. 3169–80.10.1016/S1359-6454(99)00194-9 ↗
60. A. Holst, A. Buchwalder, and R. Zenker: Metall. Ital., 2020, vol. 112, pp. 61–72.
61. H.-J. Spies, H. Biermann, and A. Fischer: Z. Metallkd., 2005, vol. 96, pp. 781–6.10.3139/146.101102 ↗
62. J. Martin, A. Martinavicius, S. Bruyère, H.P. van Landeghem, C. Gendarme, F. Danoix, R. Danoix, A. Redjaimia, T. Grosdidier, and T. Czerwiec: J. Alloys Compd., 2016, vol. 683, pp. 418–26.10.1016/j.jallcom.2016.05.119 ↗
63. N.M. Le, C. Schimpf, H. Biermann, and A. Dalke: Metall. Mater. Trans. B., 2021, vol. 52, pp. 414–24.10.1007/s11663-020-02029-x ↗
64. H. Göhring, A. Leineweber, and E.J. Mittemeijer: Metall. Mat. Trans. A., 2016, vol. 47, pp. 4411–24.10.1007/s11661-016-3605-5 ↗
65. S.T. Pisarik and D.C. van Aken: Metall. Mat. Trans. A., 2014, vol. 45, pp. 3173–8.10.1007/s11661-014-2303-4 ↗
66. H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2018, vol. 142, pp. 1–3.
67. S.S. Babu, K. Hono, and T. Sakurai: Appl. Surf. Sci., 1993, vol. 67, pp. 321–7.10.1016/0169-4332(93)90333-7 ↗
68. M. Wohlschlögel, U. Welzel, and E.J. Mittemeijer: Appl. Phys. Lett., 2007, vol. 91, pp. 147–51.10.1063/1.2793176 ↗
69. M.H. Wetzel, M.R. Schwarz, and A. Leineweber: J. Alloys Compd., 2019, vol. 801, pp. 438–48.10.1016/j.jallcom.2019.06.078 ↗