journal article·2015-01

Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part II: Experimental Validation and Applications

Tihe Zhou, Peng Zhang, Ronald J. O’Malley, Hatem S. Zurob, Mani Subramanian

Publisher page

Abstract

In order to achieve a fine uniform grain-size distribution using the process of thin slab casting and directing rolling (TSCDR), it is necessary to control the grain-size prior to the onset of thermomechanical processing. In the companion paper, Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part I: Coarsening Mechanism and Particle Pinning Effects, a new steel composition which uses a small volume fraction of austenite particles to pin the growth of delta-ferrite grains at high temperature was proposed and grain growth was studied in reheated samples. This paper will focus on the development of a simple laboratory-scale setup to simulate thin-slab casting of the newly developed steel and demonstrate the potential for grain size control under industrial conditions. Steel bars with different diameters are briefly dipped into the molten steel to create a shell of solidified material. These are then cooled down to room temperature at different cooling rates. During cooling, the austenite particles nucleate along the delta-ferrite grain boundaries and greatly retard grain growth. With decreasing temperature, more austenite particles precipitate, and grain growth can be completely arrested in the holding furnace. Additional applications of the model alloy are discussed including grain-size control in the heat affected zone in welds and grain-growth resistance at high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. C. Klinkenberg, C. Bilgen, J.M. Rodriguez-Ibabe, B. Lopez and P. Uranga: Mater. Sci. Forum, 2012, vols. 706-709, pp. 2752-57.10.4028/www.scientific.net/MSF.706-709.2752 ↗
2. G. Arvedi, F. Mazzolari, J. Siegl, G. Hohenbichler and G. Holleis: Ironmaking and Steelmaking, 2010, vol. 37(4):271-75.10.1179/030192310X12646889255744 ↗
3. K. Hensger, L. Leduc Lezama, and F. Siciliano: 33rd McMaster Symposium on Iron & Steelmaking: Thinner Slab Casting, G.A. Irons, ed., McMaster University, Hamilton, 2005, pp. 262–76.
4. S.J. Cobo and C.M. Sellars: Ironmaking and Steelmaking. 2001, vol. 28(3), pp. 230-36.10.1179/030192301678082 ↗
5. P. Uranga, A.I. Fernández, B. López, and J.M. Rodriguez-Ibabe: Mater. Sci. Forum, 2005, vols. 500-501, pp. 245-52.10.4028/www.scientific.net/MSF.500-501.245 ↗
6. N.S. Pottore, C.I. Garcia, and A.J. DeArdo: Metall. Trans. A, 1991, vol. 22A, pp. 1871-80.10.1007/BF02646512 ↗
7. T. Gladman: The Physical Metallurgy of Microalloyed Steel, Institute of Materials, London, 1997, pp. 159-61.
8. Available from Thermo-calc Software: www.thermocalc.com. Accessed 7 Oct 2014.
9. T. Zhou, R.J. O’Malley and H.S. Zurob: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2112-20.10.1007/s11661-010-0246-y ↗
10. J.W. Martin, R.D. Doherty and B. Cantor: Stability of Microstructure in Metallic System, Cambridge University Press, Cambridge, 1997, pp. 219-31.10.1017/CBO9780511623134 ↗
11. Y. Meng and B. G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 685-705.10.1007/s11663-003-0040-y ↗
12. L.P. Zhang, C.L. Davis, and M. Strangwood: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2089–96.10.1007/s11661-999-0019-7 ↗
13. F. Hamad, L. Collins, and R. Volkers: Proc. 7th Int. Pipeline Conf. (IPC2008), ASME, Calgary, 2008, IPC2008-64097.
14. R.A. Silva, G.Z. Batista, L.F.G. de Souza, and I.S. Bott: Mater. Sci. Forum, 2012, vols. 706-709, pp. 2059-65.10.4028/www.scientific.net/MSF.706-709.2059 ↗
15. K. Banerjee, M. Militzer, M. Perez and X. Wang: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3161-72.10.1007/s11661-010-0376-2 ↗
16. D. Turnbull: Trans. AIME, 1951, vol. 191, pp. 661-65.
17. T. Zhou and H.S. Zurob: Can. Metall. Q., 2011, vol. 50(4), pp. 389-95.10.1179/1879139511Y.0000000002 ↗